[Fri Oct 14 23:23:09 2011] Detection parameters:
  Position = (395.1, 282.6) = 22 48 25.33 -16 3 21.3
  Extent = 0.6" x 0.5", rotation angle = 3 degrees
  Source counts = 14.3 +/- 3.9
  Background counts = 0.7
  Rate = 0.0007 +/- 0.0002

[Fri Oct 14 23:23:11 2011] Off-axis axis estimate = 1.20'
[Fri Oct 14 23:24:08 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Fri Oct 14 23:24:08 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Fri Oct 14 23:24:08 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.921
[Fri Oct 14 23:24:08 2011] Giving source the simple spatial ID 6 for pass 0, mean size = 0.38"
[Fri Oct 14 23:24:09 2011] fullrun_ccd2_acisf10439_pi14-548_cl_pass0_src6.ximg exists
[Fri Oct 14 23:24:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10439_pi14-548_cl_pass0_src6.csv
[Fri Oct 14 23:24:09 2011] fullrun_ccd2_acisf10439_pi14-548_cl_pass0_src6_1.ximg exists
[Fri Oct 14 23:24:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10439_pi14-548_cl_pass0_src6.csv
[Fri Oct 14 23:24:09 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10439_pi14-548_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10439_pi14-548_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 14 23:24:09 2011] fullrun_ccd2_acisf10439_pi14-548_cl_pass0_tfrozen_src6.ximg exists
[Fri Oct 14 23:24:09 2011] fullrun_ccd2_acisf10439_pi14-548_cl_pass0_tfrozen_src6_1.ximg exists
[Fri Oct 14 23:24:09 2011] Fit fullrun_ccd2_acisf10439_pi14-548_cl_pass0_tfrozen_src6 appears to have run properly
[Fri Oct 14 23:24:21 2011] Spatial fit model total counts = 16.410600, observed total counts = 17.000000
[Fri Oct 14 23:24:21 2011] Offset between fit and detection position for source 5 = 0.424478 pixels
[Fri Oct 14 23:24:21 2011] 16.395220 total counts/ 4.186520 bgd. counts: snr = 5.966819
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.424478 pixels
  Position = (395.1, 283.0) = 22 48 25.35 -16 3 21.3
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 12.2 +/- 4.0
  Background counts = 4.2
  Rate = 0.0006 +/- 0.0002
[Fri Oct 14 23:24:21 2011] Vigneting correction estimate = 1.000000
[Fri Oct 14 23:24:21 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 14 23:24:21 2011] Assessing source extent using major axis lower bound
[Fri Oct 14 23:24:21 2011] Source does appear to be extended
[Fri Oct 14 23:24:21 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 14 23:24:44 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 14 23:24:44 2011] Initial guess for spatial extent in simple fitting = 0.43"
[Fri Oct 14 23:24:44 2011] source mask rpix=0.9, npix_max = 7, mask sum = 4, frac = 0.525
[Fri Oct 14 23:24:44 2011] Giving source the simple spatial ID 6 for pass 1, mean size = 0.43"
[Fri Oct 14 23:24:45 2011] fullrun_ccd2_acisf10439_pi14-548_cl_pass1_src6.ximg exists
[Fri Oct 14 23:24:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10439_pi14-548_cl_pass1_src6.csv
[Fri Oct 14 23:24:45 2011] fullrun_ccd2_acisf10439_pi14-548_cl_pass1_src6_1.ximg exists
[Fri Oct 14 23:24:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10439_pi14-548_cl_pass1_src6.csv
[Fri Oct 14 23:24:45 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10439_pi14-548_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10439_pi14-548_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 14 23:24:45 2011] fullrun_ccd2_acisf10439_pi14-548_cl_pass1_tfrozen_src6.ximg exists
[Fri Oct 14 23:24:45 2011] fullrun_ccd2_acisf10439_pi14-548_cl_pass1_tfrozen_src6_1.ximg exists
[Fri Oct 14 23:24:45 2011] Fit fullrun_ccd2_acisf10439_pi14-548_cl_pass1_tfrozen_src6 appears to have run properly
[Fri Oct 14 23:24:53 2011] Spatial fit model total counts = 17.436100, observed total counts = 17.000000
[Fri Oct 14 23:24:53 2011] Offset between fit and detection position for source 5 = 0.039409 pixels
[Fri Oct 14 23:24:53 2011] 17.155310 total counts/ 3.843810 bgd. counts: snr = 6.789629
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.039409 pixels
  Position = (395.1, 283.0) = 22 48 25.34 -16 3 21.3
  Extent = 0.4 (0.3-0.7)", rotation angle = 0
  Source counts = 13.3 +/- 4.1
  Background counts = 3.8
  Rate = 0.0007 +/- 0.0002
[Fri Oct 14 23:24:53 2011] Vigneting correction estimate = 1.000000
[Fri Oct 14 23:24:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 14 23:24:53 2011] Assessing source extent using major axis lower bound
[Fri Oct 14 23:24:53 2011] Source does appear to be extended
[Fri Oct 14 23:24:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 14 23:26:08 2011] Not overwriting source region fullrun_ccd2_acisf10439_pi14-548_pass1_cl_src5_src.reg
[Fri Oct 14 23:26:08 2011] Extracting stamp from image fullrun_ccd2_acisf10439_pi14-548_cl_sm2.00.img.gz, (376, 264) - (415, 302)
[Fri Oct 14 23:26:08 2011] Writing fullrun_ccd2_acisf10439_pi14-548_pass1_cl_src5.gif
[Fri Oct 14 23:26:23 2011] ../../acisf10439/products/events/fullrun_ccd2_acisf10439_pi14-548_pass1_cl_src5_src.evt and ../../acisf10439/products/events/fullrun_ccd2_acisf10439_pi14-548_pass1_cl_src5_bgd.evt exist, delete to re-create
[Fri Oct 14 23:26:23 2011] Size of ../../acisf10439/products/events/fullrun_ccd2_acisf10439_pi14-548_pass1_cl_src5_src.evt.gz[events] = 13 counts
[Fri Oct 14 23:26:23 2011] Mean chipx,y = (389.15, 913.38)
[Fri Oct 14 23:26:23 2011] Mean tdetx,y = (3974.38, 3696.85)
[Fri Oct 14 23:26:23 2011] chipx,y range = (375.00-403.00, 901.00-935.00)
[Fri Oct 14 23:26:23 2011] Size of ../../acisf10439/products/events/fullrun_ccd2_acisf10439_pi14-548_pass1_cl_src5_bgd.evt.gz[events] = 4 counts
[Fri Oct 14 23:26:23 2011] ../../acisf10439/products/images/fullrun_ccd2_acisf10439_pi14-548_pass1_cl_src5_src.img and ../../acisf10439/products/images/fullrun_ccd2_acisf10439_pi14-548_pass1_cl_src5_bgd.img exist, delete to re-create
[Fri Oct 14 23:26:23 2011] ../../acisf10439/products/spectra/fullrun_ccd2_acisf10439_pi14-548_pass1_cl_src5_src.pi and ../../acisf10439/products/spectra/fullrun_ccd2_acisf10439_pi14-548_pass1_cl_src5_bgd.pi exist, delete to re-create
[Fri Oct 14 23:26:23 2011] Not generating rmf since there are only 13 counts
[Fri Oct 14 23:26:26 2011] ../../acisf10439/products/lightcurves/fullrun_ccd2_acisf10439_pi14-548_pass1_cl_src5_src.lc and ../../acisf10439/products/lightcurves/fullrun_ccd2_acisf10439_pi14-548_pass1_cl_src5_bgd.lc exist, delete to re-create
[Fri Oct 14 23:27:43 2011] 199.061
[Fri Oct 14 23:28:40 2011] Updating aperture counts using extracted products
[Fri Oct 14 23:28:40 2011] Error reading totcts from fullrun_ccd2_acisf10439_pi14-548_pass1_cl_src5_src.pi.gz
[Fri Oct 14 23:28:41 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 14 23:28:41 2011] Using photon index=1.80, rate=0.000673, arf fullrun_ccd2_acisf10439_pi14-548_pass1_cl_src5.arf
[Fri Oct 14 23:28:41 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 14 23:28:41 2011] Updating source flux to 7.8e-15
[Fri Oct 14 23:28:49 2011] Source 5 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Oct 14 23:28:50 2011] acisf10439/analysis//spectral/fullrun_ccd2_acisf10439_pi14-548_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete