[Wed Oct 26 01:01:51 2011] Detection parameters:
  Position = (859.2, 405.0) = 15 0 35.26 21 24 34.0
  Extent = 0.5" x 0.5", rotation angle = 174 degrees
  Source counts = 11.5 +/- 3.5
  Background counts = 0.5
  Rate = 0.0006 +/- 0.0002

[Wed Oct 26 01:01:52 2011] Off-axis axis estimate = 2.12'
[Wed Oct 26 01:02:34 2011] Using EEF radius (= 0.44 ")to estimate initial spatial extent for simple fitting
[Wed Oct 26 01:02:34 2011] Initial guess for spatial extent in simple fitting = 0.44"
[Wed Oct 26 01:02:34 2011] source mask rpix=0.9, npix_max = 7, mask sum = 6, frac = 0.765
[Wed Oct 26 01:02:34 2011] Giving source the simple spatial ID 10 for pass 0, mean size = 0.44"
[Wed Oct 26 01:02:35 2011] fullrun_ccd2_acisf10438_pi14-548_cl_pass0_src10.ximg exists
[Wed Oct 26 01:02:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10438_pi14-548_cl_pass0_src10.csv
[Wed Oct 26 01:02:35 2011] fullrun_ccd2_acisf10438_pi14-548_cl_pass0_src10_1.ximg exists
[Wed Oct 26 01:02:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10438_pi14-548_cl_pass0_src10.csv
[Wed Oct 26 01:02:35 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10438_pi14-548_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10438_pi14-548_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 01:02:35 2011] fullrun_ccd2_acisf10438_pi14-548_cl_pass0_tfrozen_src10.ximg exists
[Wed Oct 26 01:02:35 2011] fullrun_ccd2_acisf10438_pi14-548_cl_pass0_tfrozen_src10_1.ximg exists
[Wed Oct 26 01:02:35 2011] Fit fullrun_ccd2_acisf10438_pi14-548_cl_pass0_tfrozen_src10 appears to have run properly
[Wed Oct 26 01:02:43 2011] Spatial fit model total counts = 15.999500, observed total counts = 16.000000
[Wed Oct 26 01:02:43 2011] Offset between fit and detection position for source 14 = 0.608822 pixels
[Wed Oct 26 01:02:43 2011] 16.129050 total counts/ 5.196050 bgd. counts: snr = 4.796260
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.608822 pixels
  Position = (859.6, 405.5) = 15 0 35.27 21 24 34.0
  Extent = 0.5 (0.4-0.8)", rotation angle = 0
  Source counts = 10.9 +/- 4.0
  Background counts = 5.2
  Rate = 0.0005 +/- 0.0002
[Wed Oct 26 01:02:43 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 01:02:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 01:02:43 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 01:02:43 2011] Source does appear to be extended
[Wed Oct 26 01:02:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 01:03:01 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct 26 01:03:01 2011] Initial guess for spatial extent in simple fitting = 0.54"
[Wed Oct 26 01:03:01 2011] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.889
[Wed Oct 26 01:03:01 2011] Giving source the simple spatial ID 10 for pass 1, mean size = 0.54"
[Wed Oct 26 01:03:01 2011] fullrun_ccd2_acisf10438_pi14-548_cl_pass1_src10.ximg exists
[Wed Oct 26 01:03:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10438_pi14-548_cl_pass1_src10.csv
[Wed Oct 26 01:03:01 2011] fullrun_ccd2_acisf10438_pi14-548_cl_pass1_src10_1.ximg exists
[Wed Oct 26 01:03:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10438_pi14-548_cl_pass1_src10.csv
[Wed Oct 26 01:03:01 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10438_pi14-548_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10438_pi14-548_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 01:03:02 2011] fullrun_ccd2_acisf10438_pi14-548_cl_pass1_tfrozen_src10.ximg exists
[Wed Oct 26 01:03:02 2011] fullrun_ccd2_acisf10438_pi14-548_cl_pass1_tfrozen_src10_1.ximg exists
[Wed Oct 26 01:03:02 2011] Fit fullrun_ccd2_acisf10438_pi14-548_cl_pass1_tfrozen_src10 appears to have run properly
[Wed Oct 26 01:03:08 2011] Spatial fit model total counts = 15.999200, observed total counts = 16.000000
[Wed Oct 26 01:03:08 2011] Offset between fit and detection position for source 14 = 0.001523 pixels
[Wed Oct 26 01:03:08 2011] 16.129060 total counts/ 5.198660 bgd. counts: snr = 4.793915
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.001523 pixels
  Position = (859.6, 405.5) = 15 0 35.27 21 24 34.0
  Extent = 0.5 (0.4-0.8)", rotation angle = 0
  Source counts = 10.9 +/- 4.0
  Background counts = 5.2
  Rate = 0.0005 +/- 0.0002
[Wed Oct 26 01:03:08 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 01:03:08 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 01:03:08 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 01:03:08 2011] Source does appear to be extended
[Wed Oct 26 01:03:08 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 01:04:26 2011] Not overwriting source region fullrun_ccd2_acisf10438_pi14-548_pass1_cl_src14_src.reg
[Wed Oct 26 01:04:26 2011] Extracting stamp from image fullrun_ccd2_acisf10438_pi14-548_cl_sm2.00.img.gz, (835, 381) - (884, 430)
[Wed Oct 26 01:04:26 2011] Writing fullrun_ccd2_acisf10438_pi14-548_pass1_cl_src14.gif
[Wed Oct 26 01:04:52 2011] ../../acisf10438/products/events/fullrun_ccd2_acisf10438_pi14-548_pass1_cl_src14_src.evt and ../../acisf10438/products/events/fullrun_ccd2_acisf10438_pi14-548_pass1_cl_src14_bgd.evt exist, delete to re-create
[Wed Oct 26 01:04:52 2011] Size of ../../acisf10438/products/events/fullrun_ccd2_acisf10438_pi14-548_pass1_cl_src14_src.evt.gz[events] = 12 counts
[Wed Oct 26 01:04:52 2011] Mean chipx,y = (348.00, 787.25)
[Wed Oct 26 01:04:52 2011] Mean tdetx,y = (3848.25, 3738.00)
[Wed Oct 26 01:04:52 2011] chipx,y range = (334.00-368.00, 773.00-802.00)
[Wed Oct 26 01:04:52 2011] Size of ../../acisf10438/products/events/fullrun_ccd2_acisf10438_pi14-548_pass1_cl_src14_bgd.evt.gz[events] = 12 counts
[Wed Oct 26 01:04:52 2011] ../../acisf10438/products/images/fullrun_ccd2_acisf10438_pi14-548_pass1_cl_src14_src.img and ../../acisf10438/products/images/fullrun_ccd2_acisf10438_pi14-548_pass1_cl_src14_bgd.img exist, delete to re-create
[Wed Oct 26 01:04:52 2011] ../../acisf10438/products/spectra/fullrun_ccd2_acisf10438_pi14-548_pass1_cl_src14_src.pi and ../../acisf10438/products/spectra/fullrun_ccd2_acisf10438_pi14-548_pass1_cl_src14_bgd.pi exist, delete to re-create
[Wed Oct 26 01:04:52 2011] Not generating rmf since there are only 10 counts
[Wed Oct 26 01:04:55 2011] ../../acisf10438/products/lightcurves/fullrun_ccd2_acisf10438_pi14-548_pass1_cl_src14_src.lc and ../../acisf10438/products/lightcurves/fullrun_ccd2_acisf10438_pi14-548_pass1_cl_src14_bgd.lc exist, delete to re-create
[Wed Oct 26 01:05:13 2011] 197.595
[Wed Oct 26 01:05:34 2011] Updating aperture counts using extracted products
[Wed Oct 26 01:05:34 2011] Error reading totcts from fullrun_ccd2_acisf10438_pi14-548_pass1_cl_src14_src.pi.gz
[Wed Oct 26 01:05:34 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 26 01:05:34 2011] Using photon index=1.80, rate=0.00055, arf fullrun_ccd2_acisf10438_pi14-548_pass1_cl_src14.arf
[Wed Oct 26 01:05:34 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 26 01:05:34 2011] Updating source flux to 6.4e-15
[Wed Oct 26 01:05:38 2011] Source 14 has fewer than 100.000000 counts, skipping spectral fitting