[Tue Apr 10 21:11:53 2012] Detection parameters:
  Position = (941.9, 632.2) = 20 34 36.12 60 8 39.4
  Extent = 0.5" x 0.5", rotation angle = 65 degrees
  Source counts = 42.0 +/- 6.7
  Background counts = 3.0
  Rate = 0.0007 +/- 0.0001

[Tue Apr 10 21:11:59 2012] Off-axis axis estimate = 0.70'
[Tue Apr 10 21:13:05 2012] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 21:13:05 2012] Initial guess for spatial extent in simple fitting = 0.38"
[Tue Apr 10 21:13:05 2012] source mask rpix=0.8, npix_max = 6, mask sum = 4, frac = 0.609
[Tue Apr 10 21:13:05 2012] Giving source the simple spatial ID 31 for pass 0, mean size = 0.38"
[Tue Apr 10 21:13:07 2012] fullrun_ccd7_acisf01043_pi14-548_cl_pass0_src31.ximg exists
[Tue Apr 10 21:13:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01043_pi14-548_cl_pass0_src31.csv
[Tue Apr 10 21:13:07 2012] fullrun_ccd7_acisf01043_pi14-548_cl_pass0_src31_1.ximg exists
[Tue Apr 10 21:13:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01043_pi14-548_cl_pass0_src31.csv
[Tue Apr 10 21:13:07 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf01043_pi14-548_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf01043_pi14-548_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 21:13:09 2012] fullrun_ccd7_acisf01043_pi14-548_cl_pass0_tfrozen_src31.ximg exists
[Tue Apr 10 21:13:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01043_pi14-548_cl_pass0_tfrozen_src31.csv
[Tue Apr 10 21:13:09 2012] fullrun_ccd7_acisf01043_pi14-548_cl_pass0_tfrozen_src31_1.ximg exists
[Tue Apr 10 21:13:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01043_pi14-548_cl_pass0_tfrozen_src31.csv
[Tue Apr 10 21:13:09 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf01043_pi14-548_cl_pass0_tfrozen_src31_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf01043_pi14-548_cl_pass0_tfrozen_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 21:13:34 2012] Spatial fit model total counts = 48.913200, observed total counts = 56.000000
[Tue Apr 10 21:13:34 2012] Offset between fit and detection position for source 34 = 0.657987 pixels
[Tue Apr 10 21:13:34 2012] 53.001500 total counts/ 11.545200 bgd. counts: snr = 12.200842
Spatial fit parameters:
  Offset between fit and detection position for source 34 = 0.657987 pixels
  Position = (942.4, 632.6) = 20 34 36.12 60 8 39.4
  Extent = 0.3 (0.3-0.3)", rotation angle = 0
  Source counts = 41.5 +/- 7.3
  Background counts = 11.5
  Rate = 0.0007 +/- 0.0001
[Tue Apr 10 21:13:34 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 21:13:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 21:13:34 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 21:13:34 2012] Source does appear to be extended
[Tue Apr 10 21:13:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 21:13:59 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Apr 10 21:13:59 2012] Initial guess for spatial extent in simple fitting = 0.29"
[Tue Apr 10 21:13:59 2012] source mask rpix=0.6, npix_max = 4, mask sum = 4, frac = 0.848
[Tue Apr 10 21:13:59 2012] Giving source the simple spatial ID 31 for pass 1, mean size = 0.29"
[Tue Apr 10 21:14:02 2012] fullrun_ccd7_acisf01043_pi14-548_cl_pass1_src31.ximg exists
[Tue Apr 10 21:14:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01043_pi14-548_cl_pass1_src31.csv
[Tue Apr 10 21:14:02 2012] fullrun_ccd7_acisf01043_pi14-548_cl_pass1_src31_1.ximg exists
[Tue Apr 10 21:14:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01043_pi14-548_cl_pass1_src31.csv
[Tue Apr 10 21:14:02 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf01043_pi14-548_cl_pass1_src31_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf01043_pi14-548_cl_pass1_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 21:14:05 2012] fullrun_ccd7_acisf01043_pi14-548_cl_pass1_tfrozen_src31.ximg exists
[Tue Apr 10 21:14:05 2012] fullrun_ccd7_acisf01043_pi14-548_cl_pass1_tfrozen_src31_1.ximg exists
[Tue Apr 10 21:14:05 2012] Fit fullrun_ccd7_acisf01043_pi14-548_cl_pass1_tfrozen_src31 appears to have run properly
[Tue Apr 10 21:14:29 2012] Spatial fit model total counts = 52.844000, observed total counts = 56.000000
[Tue Apr 10 21:14:29 2012] Offset between fit and detection position for source 34 = 0.022890 pixels
[Tue Apr 10 21:14:29 2012] 54.580100 total counts/ 13.740200 bgd. counts: snr = 11.017629
Spatial fit parameters:
  Offset between fit and detection position for source 34 = 0.022890 pixels
  Position = (942.4, 632.6) = 20 34 36.12 60 8 39.4
  Extent = 0.3 (0.2-0.4)", rotation angle = 0
  Source counts = 40.8 +/- 7.4
  Background counts = 13.7
  Rate = 0.0007 +/- 0.0001
[Tue Apr 10 21:14:29 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 21:14:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 21:14:29 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 21:14:29 2012] Source does appear to be extended
[Tue Apr 10 21:14:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 21:20:05 2012] Not overwriting source region fullrun_ccd7_acisf01043_pi14-548_pass1_cl_src34_src.reg
[Tue Apr 10 21:20:05 2012] Extracting stamp from image fullrun_ccd7_acisf01043_pi14-548_cl_sm2.00.img.gz, (929, 620) - (955, 646)
[Tue Apr 10 21:20:05 2012] Writing fullrun_ccd7_acisf01043_pi14-548_pass1_cl_src34.gif
[Tue Apr 10 21:24:05 2012] ../../acisf01043/products/events/fullrun_ccd7_acisf01043_pi14-548_pass1_cl_src34_src.evt and ../../acisf01043/products/events/fullrun_ccd7_acisf01043_pi14-548_pass1_cl_src34_bgd.evt exist, delete to re-create
[Tue Apr 10 21:24:05 2012] Size of ../../acisf01043/products/events/fullrun_ccd7_acisf01043_pi14-548_pass1_cl_src34_src.evt.gz[events] = 42 counts
[Tue Apr 10 21:24:05 2012] Mean chipx,y = (285.21, 564.93)
[Tue Apr 10 21:24:05 2012] Mean tdetx,y = (4202.21, 2266.93)
[Tue Apr 10 21:24:05 2012] chipx,y range = (269.00-303.00, 548.00-582.00)
[Tue Apr 10 21:24:05 2012] Size of ../../acisf01043/products/events/fullrun_ccd7_acisf01043_pi14-548_pass1_cl_src34_bgd.evt.gz[events] = 11 counts
[Tue Apr 10 21:24:05 2012] ../../acisf01043/products/images/fullrun_ccd7_acisf01043_pi14-548_pass1_cl_src34_src.img and ../../acisf01043/products/images/fullrun_ccd7_acisf01043_pi14-548_pass1_cl_src34_bgd.img exist, delete to re-create
[Tue Apr 10 21:24:05 2012] Not generating rmf since there are only 40 counts
[Tue Apr 10 21:24:05 2012] arf not found, will run specextract
[Tue Apr 10 21:24:07 2012] ../../acisf01043/products/spectra/fullrun_ccd7_acisf01043_pi14-548_pass1_cl_src34_bkg.pi not found
[Tue Apr 10 21:24:07 2012] ../../acisf01043/products/spectra/fullrun_ccd7_acisf01043_pi14-548_pass1_cl_src34.warf not found
[Tue Apr 10 21:24:07 2012] ../../acisf01043/products/spectra/fullrun_ccd7_acisf01043_pi14-548_pass1_cl_src34.wrmf not found
[Tue Apr 10 21:24:07 2012] Removal of ../../acisf01043/products/spectra/fullrun_ccd7_acisf01043_pi14-548_pass1_cl_src34.soff failed
[Tue Apr 10 21:24:07 2012] Failed to rename ../../acisf01043/products/spectra/fullrun_ccd7_acisf01043_pi14-548_pass1_cl_src34_grp.pi to ../../acisf01043/products/spectra/fullrun_ccd7_acisf01043_pi14-548_pass1_cl_src34_src.pi
[Tue Apr 10 21:24:12 2012] ../../acisf01043/products/lightcurves/fullrun_ccd7_acisf01043_pi14-548_pass1_cl_src34_src.lc and ../../acisf01043/products/lightcurves/fullrun_ccd7_acisf01043_pi14-548_pass1_cl_src34_bgd.lc exist, delete to re-create
[Tue Apr 10 21:28:59 2012] No arf file found
[Tue Apr 10 21:29:03 2012] Updating aperture counts using extracted products
[Tue Apr 10 21:29:03 2012] Error reading totcts from fullrun_ccd7_acisf01043_pi14-548_pass1_cl_src34_src.pi
[Tue Apr 10 21:29:04 2012] No arf file for this source, not re-computing flux
[Tue Apr 10 21:29:12 2012] Source 34 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Apr 10 21:29:13 2012] acisf01043/analysis//spectral/fullrun_ccd7_acisf01043_pi14-548_pass1_cl_src34_pl.csv not found, spectral fit skipped or did not complete