[Tue Apr 10 21:11:53 2012] Detection parameters:
  Position = (937.6, 305.4) = 20 34 36.40 60 5 58.6
  Extent = 0.6" x 0.5", rotation angle = 134 degrees
  Source counts = 37.8 +/- 6.3
  Background counts = 2.2
  Rate = 0.0006 +/- 0.0001

[Tue Apr 10 21:11:59 2012] Off-axis axis estimate = 2.03'
[Tue Apr 10 21:13:05 2012] Using EEF radius (= 0.43 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 21:13:05 2012] Initial guess for spatial extent in simple fitting = 0.43"
[Tue Apr 10 21:13:05 2012] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.181
[Tue Apr 10 21:13:05 2012] Giving source the simple spatial ID 35 for pass 0, mean size = 0.43"
[Tue Apr 10 21:13:07 2012] fullrun_ccd7_acisf01043_pi14-548_cl_pass0_src35.ximg exists
[Tue Apr 10 21:13:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01043_pi14-548_cl_pass0_src35.csv
[Tue Apr 10 21:13:07 2012] fullrun_ccd7_acisf01043_pi14-548_cl_pass0_src35_1.ximg exists
[Tue Apr 10 21:13:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01043_pi14-548_cl_pass0_src35.csv
[Tue Apr 10 21:13:07 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf01043_pi14-548_cl_pass0_src35_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf01043_pi14-548_cl_pass0_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 21:13:09 2012] fullrun_ccd7_acisf01043_pi14-548_cl_pass0_tfrozen_src35.ximg exists
[Tue Apr 10 21:13:09 2012] fullrun_ccd7_acisf01043_pi14-548_cl_pass0_tfrozen_src35_1.ximg exists
[Tue Apr 10 21:13:09 2012] Fit fullrun_ccd7_acisf01043_pi14-548_cl_pass0_tfrozen_src35 appears to have run properly
[Tue Apr 10 21:13:34 2012] Spatial fit model total counts = 42.953300, observed total counts = 43.000000
[Tue Apr 10 21:13:34 2012] Offset between fit and detection position for source 28 = 0.623158 pixels
[Tue Apr 10 21:13:34 2012] 43.422880 total counts/ 7.782680 bgd. counts: snr = 12.775431
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 0.623158 pixels
  Position = (938.1, 305.7) = 20 34 36.40 60 5 58.6
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 35.6 +/- 6.6
  Background counts = 7.8
  Rate = 0.0006 +/- 0.0001
[Tue Apr 10 21:13:34 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 21:13:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 21:13:34 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 21:13:34 2012] Source does appear to be extended
[Tue Apr 10 21:13:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 21:13:59 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Apr 10 21:13:59 2012] Initial guess for spatial extent in simple fitting = 0.47"
[Tue Apr 10 21:13:59 2012] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.057
[Tue Apr 10 21:13:59 2012] Giving source the simple spatial ID 35 for pass 1, mean size = 0.47"
[Tue Apr 10 21:14:02 2012] fullrun_ccd7_acisf01043_pi14-548_cl_pass1_src35.ximg exists
[Tue Apr 10 21:14:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01043_pi14-548_cl_pass1_src35.csv
[Tue Apr 10 21:14:02 2012] fullrun_ccd7_acisf01043_pi14-548_cl_pass1_src35_1.ximg exists
[Tue Apr 10 21:14:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01043_pi14-548_cl_pass1_src35.csv
[Tue Apr 10 21:14:02 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf01043_pi14-548_cl_pass1_src35_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf01043_pi14-548_cl_pass1_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 21:14:05 2012] fullrun_ccd7_acisf01043_pi14-548_cl_pass1_tfrozen_src35.ximg exists
[Tue Apr 10 21:14:05 2012] fullrun_ccd7_acisf01043_pi14-548_cl_pass1_tfrozen_src35_1.ximg exists
[Tue Apr 10 21:14:05 2012] Fit fullrun_ccd7_acisf01043_pi14-548_cl_pass1_tfrozen_src35 appears to have run properly
[Tue Apr 10 21:14:29 2012] Spatial fit model total counts = 43.999900, observed total counts = 44.000000
[Tue Apr 10 21:14:29 2012] Offset between fit and detection position for source 28 = 0.003717 pixels
[Tue Apr 10 21:14:29 2012] 44.252080 total counts/ 8.643280 bgd. counts: snr = 12.112061
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 0.003717 pixels
  Position = (938.1, 305.7) = 20 34 36.40 60 5 58.6
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 35.6 +/- 6.7
  Background counts = 8.6
  Rate = 0.0006 +/- 0.0001
[Tue Apr 10 21:14:29 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 21:14:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 21:14:29 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 21:14:29 2012] Source does appear to be extended
[Tue Apr 10 21:14:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 21:20:05 2012] Not overwriting source region fullrun_ccd7_acisf01043_pi14-548_pass1_cl_src28_src.reg
[Tue Apr 10 21:20:05 2012] Extracting stamp from image fullrun_ccd7_acisf01043_pi14-548_cl_sm2.00.img.gz, (917, 284) - (960, 327)
[Tue Apr 10 21:20:05 2012] Writing fullrun_ccd7_acisf01043_pi14-548_pass1_cl_src28.gif
[Tue Apr 10 21:24:36 2012] ../../acisf01043/products/events/fullrun_ccd7_acisf01043_pi14-548_pass1_cl_src28_src.evt and ../../acisf01043/products/events/fullrun_ccd7_acisf01043_pi14-548_pass1_cl_src28_bgd.evt exist, delete to re-create
[Tue Apr 10 21:24:37 2012] Size of ../../acisf01043/products/events/fullrun_ccd7_acisf01043_pi14-548_pass1_cl_src28_src.evt.gz[events] = 37 counts
[Tue Apr 10 21:24:37 2012] Mean chipx,y = (82.35, 307.62)
[Tue Apr 10 21:24:37 2012] Mean tdetx,y = (3999.35, 2009.62)
[Tue Apr 10 21:24:37 2012] chipx,y range = (66.00-99.00, 291.00-325.00)
[Tue Apr 10 21:24:37 2012] Size of ../../acisf01043/products/events/fullrun_ccd7_acisf01043_pi14-548_pass1_cl_src28_bgd.evt.gz[events] = 14 counts
[Tue Apr 10 21:24:37 2012] ../../acisf01043/products/images/fullrun_ccd7_acisf01043_pi14-548_pass1_cl_src28_src.img and ../../acisf01043/products/images/fullrun_ccd7_acisf01043_pi14-548_pass1_cl_src28_bgd.img exist, delete to re-create
[Tue Apr 10 21:24:37 2012] Not generating rmf since there are only 35 counts
[Tue Apr 10 21:24:37 2012] arf not found, will run specextract
[Tue Apr 10 21:24:39 2012] ../../acisf01043/products/spectra/fullrun_ccd7_acisf01043_pi14-548_pass1_cl_src28_bkg.pi not found
[Tue Apr 10 21:24:39 2012] ../../acisf01043/products/spectra/fullrun_ccd7_acisf01043_pi14-548_pass1_cl_src28.warf not found
[Tue Apr 10 21:24:39 2012] ../../acisf01043/products/spectra/fullrun_ccd7_acisf01043_pi14-548_pass1_cl_src28.wrmf not found
[Tue Apr 10 21:24:39 2012] Removal of ../../acisf01043/products/spectra/fullrun_ccd7_acisf01043_pi14-548_pass1_cl_src28.soff failed
[Tue Apr 10 21:24:39 2012] Failed to rename ../../acisf01043/products/spectra/fullrun_ccd7_acisf01043_pi14-548_pass1_cl_src28_grp.pi to ../../acisf01043/products/spectra/fullrun_ccd7_acisf01043_pi14-548_pass1_cl_src28_src.pi
[Tue Apr 10 21:24:45 2012] ../../acisf01043/products/lightcurves/fullrun_ccd7_acisf01043_pi14-548_pass1_cl_src28_src.lc and ../../acisf01043/products/lightcurves/fullrun_ccd7_acisf01043_pi14-548_pass1_cl_src28_bgd.lc exist, delete to re-create
[Tue Apr 10 21:28:59 2012] No arf file found
[Tue Apr 10 21:29:03 2012] Updating aperture counts using extracted products
[Tue Apr 10 21:29:03 2012] Error reading totcts from fullrun_ccd7_acisf01043_pi14-548_pass1_cl_src28_src.pi
[Tue Apr 10 21:29:04 2012] No arf file for this source, not re-computing flux
[Tue Apr 10 21:29:12 2012] Source 28 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Apr 10 21:29:13 2012] acisf01043/analysis//spectral/fullrun_ccd7_acisf01043_pi14-548_pass1_cl_src28_pl.csv not found, spectral fit skipped or did not complete