[Sat Oct 29 23:10:42 2011] Detection parameters:
  Position = (755.8, 1082.1) = 12 58 14.15 -1 54 43.7
  Extent = 0.5" x 0.5", rotation angle = 56 degrees
  Source counts = 11.8 +/- 3.5
  Background counts = 0.2
  Rate = 0.003 +/- 0.0007

[Sat Oct 29 23:10:42 2011] Off-axis axis estimate = 2.86'
[Sat Oct 29 23:11:12 2011] Using EEF radius (= 0.55 ")to estimate initial spatial extent for simple fitting
[Sat Oct 29 23:11:12 2011] Initial guess for spatial extent in simple fitting = 0.55"
[Sat Oct 29 23:11:12 2011] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.135
[Sat Oct 29 23:11:12 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 0.55"
[Sat Oct 29 23:11:12 2011] fullrun_ccd1_acisf10426_pi14-548_cl_pass0_src2.ximg exists
[Sat Oct 29 23:11:12 2011] fullrun_ccd1_acisf10426_pi14-548_cl_pass0_src2_1.ximg exists
[Sat Oct 29 23:11:12 2011] Fit fullrun_ccd1_acisf10426_pi14-548_cl_pass0_src2 appears to have run properly
[Sat Oct 29 23:11:12 2011] fullrun_ccd1_acisf10426_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Sat Oct 29 23:11:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10426_pi14-548_cl_pass0_tfrozen_src2.csv
[Sat Oct 29 23:11:12 2011] fullrun_ccd1_acisf10426_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Sat Oct 29 23:11:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10426_pi14-548_cl_pass0_tfrozen_src2.csv
[Sat Oct 29 23:11:12 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10426_pi14-548_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10426_pi14-548_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 29 23:11:16 2011] Spatial fit model total counts = 10.555300, observed total counts = 14.000000
[Sat Oct 29 23:11:16 2011] Offset between fit and detection position for source 2 = 0.699367 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.699367 pixels
  Position = (756.3, 1082.6) = 12 58 14.15 -1 54 43.7
  Extent = 0.6 (0.5-0.8)", rotation angle = 0
  Source counts = 11.4 +/- 3.4
  Background counts = 0.0
  Rate = 0.002 +/- 0.0007
[Sat Oct 29 23:11:16 2011] Vigneting correction estimate = 1.000000
[Sat Oct 29 23:11:16 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 29 23:11:16 2011] Assessing source extent using major axis lower bound
[Sat Oct 29 23:11:16 2011] Source does appear to be extended
[Sat Oct 29 23:11:16 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 29 23:11:31 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 29 23:11:31 2011] Initial guess for spatial extent in simple fitting = 0.57"
[Sat Oct 29 23:11:31 2011] source mask rpix=1.2, npix_max = 10, mask sum = 9, frac = 0.822
[Sat Oct 29 23:11:31 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 0.57"
[Sat Oct 29 23:11:32 2011] fullrun_ccd1_acisf10426_pi14-548_cl_pass1_src2.ximg exists
[Sat Oct 29 23:11:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10426_pi14-548_cl_pass1_src2.csv
[Sat Oct 29 23:11:32 2011] fullrun_ccd1_acisf10426_pi14-548_cl_pass1_src2_1.ximg exists
[Sat Oct 29 23:11:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10426_pi14-548_cl_pass1_src2.csv
[Sat Oct 29 23:11:32 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10426_pi14-548_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10426_pi14-548_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 29 23:11:32 2011] fullrun_ccd1_acisf10426_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Sat Oct 29 23:11:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10426_pi14-548_cl_pass1_tfrozen_src2.csv
[Sat Oct 29 23:11:32 2011] fullrun_ccd1_acisf10426_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Sat Oct 29 23:11:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10426_pi14-548_cl_pass1_tfrozen_src2.csv
[Sat Oct 29 23:11:32 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10426_pi14-548_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10426_pi14-548_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 29 23:11:36 2011] Spatial fit model total counts = 11.384700, observed total counts = 14.000000
[Sat Oct 29 23:11:36 2011] Offset between fit and detection position for source 2 = 0.012340 pixels
[Sat Oct 29 23:11:36 2011] 12.211528 total counts/ 0.159728 bgd. counts: snr = 30.155143
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.012340 pixels
  Position = (756.3, 1082.6) = 12 58 14.15 -1 54 43.7
  Extent = 0.6 (0.4-0.8)", rotation angle = 0
  Source counts = 12.1 +/- 3.5
  Background counts = 0.2
  Rate = 0.003 +/- 0.0007
[Sat Oct 29 23:11:36 2011] Vigneting correction estimate = 1.000000
[Sat Oct 29 23:11:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 29 23:11:36 2011] Assessing source extent using major axis lower bound
[Sat Oct 29 23:11:36 2011] Source does appear to be extended
[Sat Oct 29 23:11:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 29 23:11:54 2011] Not overwriting source region fullrun_ccd1_acisf10426_pi14-548_pass1_cl_src2_src.reg
[Sat Oct 29 23:11:54 2011] Extracting stamp from image fullrun_ccd1_acisf10426_pi14-548_cl_sm2.00.img.gz, (730, 1057) - (782, 1109)
[Sat Oct 29 23:11:54 2011] Writing fullrun_ccd1_acisf10426_pi14-548_pass1_cl_src2.gif
[Sat Oct 29 23:11:57 2011] ../../acisf10426/products/events/fullrun_ccd1_acisf10426_pi14-548_pass1_cl_src2_src.evt and ../../acisf10426/products/events/fullrun_ccd1_acisf10426_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Sat Oct 29 23:11:57 2011] Size of ../../acisf10426/products/events/fullrun_ccd1_acisf10426_pi14-548_pass1_cl_src2_src.evt.gz[events] = 12 counts
[Sat Oct 29 23:11:57 2011] Mean chipx,y = (241.17, 921.67)
[Sat Oct 29 23:11:57 2011] Mean tdetx,y = (4210.33, 4348.17)
[Sat Oct 29 23:11:58 2011] chipx,y range = (222.00-255.00, 904.00-937.00)
[Sat Oct 29 23:11:58 2011] Size of ../../acisf10426/products/events/fullrun_ccd1_acisf10426_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 3 counts
[Sat Oct 29 23:11:58 2011] ../../acisf10426/products/images/fullrun_ccd1_acisf10426_pi14-548_pass1_cl_src2_src.img and ../../acisf10426/products/images/fullrun_ccd1_acisf10426_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Sat Oct 29 23:11:58 2011] ../../acisf10426/products/spectra/fullrun_ccd1_acisf10426_pi14-548_pass1_cl_src2_src.pi and ../../acisf10426/products/spectra/fullrun_ccd1_acisf10426_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Sat Oct 29 23:11:58 2011] Not generating rmf since there are only 12 counts
[Sat Oct 29 23:12:00 2011] ../../acisf10426/products/lightcurves/fullrun_ccd1_acisf10426_pi14-548_pass1_cl_src2_src.lc and ../../acisf10426/products/lightcurves/fullrun_ccd1_acisf10426_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Sat Oct 29 23:12:04 2011] 200.208
[Sat Oct 29 23:12:24 2011] Updating aperture counts using extracted products
[Sat Oct 29 23:12:24 2011] Error reading totcts from fullrun_ccd1_acisf10426_pi14-548_pass1_cl_src2_src.pi.gz
[Sat Oct 29 23:12:24 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 29 23:12:24 2011] Using photon index=1.80, rate=0.00256, arf fullrun_ccd1_acisf10426_pi14-548_pass1_cl_src2.arf
[Sat Oct 29 23:12:24 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 29 23:12:24 2011] Updating source flux to 3e-14
[Sat Oct 29 23:12:27 2011] Source 2 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Oct 29 23:12:28 2011] acisf10426/analysis//spectral/fullrun_ccd1_acisf10426_pi14-548_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete