[Wed Oct 5 00:14:10 2011] Detection parameters: Position = (589.4, 374.0) = 19 7 35.63 7 6 42.8 Extent = 0.5" x 0.5", rotation angle = 27 degrees Source counts = 20.3 +/- 7.4 Background counts = 34.7 Rate = 0.0003 +/- 0.0001 [Wed Oct 5 00:14:14 2011] Off-axis axis estimate = 0.82' [Wed Oct 5 00:17:19 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting [Wed Oct 5 00:17:19 2011] Initial guess for spatial extent in simple fitting = 0.38" [Wed Oct 5 00:17:19 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.922 [Wed Oct 5 00:17:19 2011] Giving source the simple spatial ID 91 for pass 0, mean size = 0.38" [Wed Oct 5 00:17:26 2011] fullrun_ccd7_acisf01042_pi14-548_cl_pass0_src91.ximg exists [Wed Oct 5 00:17:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01042_pi14-548_cl_pass0_src91.csv [Wed Oct 5 00:17:26 2011] fullrun_ccd7_acisf01042_pi14-548_cl_pass0_src91_1.ximg exists [Wed Oct 5 00:17:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01042_pi14-548_cl_pass0_src91.csv [Wed Oct 5 00:17:26 2011] It looks like the fit did not converge You should probably delete fullrun_ccd7_acisf01042_pi14-548_cl_pass0_src91_1.ximg Either tweak this fit manually starting from fullrun_ccd7_acisf01042_pi14-548_cl_pass0_src91.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Oct 5 00:17:29 2011] fullrun_ccd7_acisf01042_pi14-548_cl_pass0_tfrozen_src91.ximg exists [Wed Oct 5 00:17:29 2011] fullrun_ccd7_acisf01042_pi14-548_cl_pass0_tfrozen_src91_1.ximg exists [Wed Oct 5 00:17:29 2011] Fit fullrun_ccd7_acisf01042_pi14-548_cl_pass0_tfrozen_src91 appears to have run properly [Wed Oct 5 00:18:04 2011] Spatial fit model total counts = 195.000000, observed total counts = 195.000000 [Wed Oct 5 00:18:04 2011] Offset between fit and detection position for source 96 = 1.259272 pixels [Wed Oct 5 00:18:04 2011] 193.949100 total counts/ 183.897000 bgd. counts: snr = 0.741258 Spatial fit parameters: Offset between fit and detection position for source 96 = 1.259272 pixels Position = (588.2, 374.1) = 19 7 35.69 7 6 42.5 Extent = 0.5 (0.1-1.5)", rotation angle = 0 Source counts = 10.1 +/- 13.9 Background counts = 183.9 Rate = 0.0002 +/- 0.0002 Deleting source due to low Poisson probability