[Wed Oct  5 00:13:54 2011] Detection parameters:
  Position = (883.9, 512.3) = 19 6 36.22 7 3 21.5
  Extent = 0.8" x 0.6", rotation angle = 163 degrees
  Source counts = 307.9 +/- 22.3
  Background counts = 189.1
  Rate = 0.005 +/- 0.0003

[Wed Oct  5 00:13:54 2011] Off-axis axis estimate = 14.33'
[Wed Oct  5 00:17:14 2011] Using EEF radius (= 9.27 ")to estimate initial spatial extent for simple fitting
[Wed Oct  5 00:17:14 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct  5 00:17:14 2011] Initial guess for spatial extent in simple fitting = 9.27"
[Wed Oct  5 00:17:14 2011] source mask rpix=18.8, npix_max = 1495, mask sum = 1402, frac = 0.938
[Wed Oct  5 00:17:14 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 9.27"
[Wed Oct  5 00:17:15 2011] fullrun_ccd2_acisf01042_pi14-548_cl_pass0_src3.ximg exists
[Wed Oct  5 00:17:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf01042_pi14-548_cl_pass0_src3.csv
[Wed Oct  5 00:17:15 2011] fullrun_ccd2_acisf01042_pi14-548_cl_pass0_src3_1.ximg exists
[Wed Oct  5 00:17:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf01042_pi14-548_cl_pass0_src3.csv
[Wed Oct  5 00:17:15 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf01042_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf01042_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 00:17:15 2011] fullrun_ccd2_acisf01042_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Wed Oct  5 00:17:15 2011] fullrun_ccd2_acisf01042_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Oct  5 00:17:15 2011] Fit fullrun_ccd2_acisf01042_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Wed Oct  5 00:17:36 2011] Spatial fit model total counts = 1207.160000, observed total counts = 1201.000000
[Wed Oct  5 00:17:36 2011] Offset between fit and detection position for source 3 = 3.221574 pixels
[Wed Oct  5 00:17:36 2011] 1207.344000 total counts/ 379.877000 bgd. counts: snr = 42.455033
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 3.221574 pixels
  Position = (886.6, 510.6) = 19 6 36.15 7 3 20.4
  Extent = 9.6 (9.0-10.2)", rotation angle = 0
  Source counts = 827.5 +/- 34.7
  Background counts = 379.9
  Rate = 0.01 +/- 0.0005
[Wed Oct  5 00:17:36 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 00:17:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 00:17:36 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 00:17:36 2011] Source does appear to be extended
[Wed Oct  5 00:17:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 00:18:34 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct  5 00:18:34 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct  5 00:18:34 2011] Initial guess for spatial extent in simple fitting = 9.63"
[Wed Oct  5 00:18:34 2011] source mask rpix=19.6, npix_max = 1611, mask sum = 1518, frac = 0.942
[Wed Oct  5 00:18:34 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 9.63"
[Wed Oct  5 00:18:34 2011] fullrun_ccd2_acisf01042_pi14-548_cl_pass1_src2.ximg exists
[Wed Oct  5 00:18:34 2011] fullrun_ccd2_acisf01042_pi14-548_cl_pass1_src2_1.ximg exists
[Wed Oct  5 00:18:34 2011] Fit fullrun_ccd2_acisf01042_pi14-548_cl_pass1_src2 appears to have run properly
[Wed Oct  5 00:18:34 2011] fullrun_ccd2_acisf01042_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Wed Oct  5 00:18:34 2011] fullrun_ccd2_acisf01042_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Wed Oct  5 00:18:34 2011] Fit fullrun_ccd2_acisf01042_pi14-548_cl_pass1_tfrozen_src2 appears to have run properly
[Wed Oct  5 00:18:50 2011] Spatial fit model total counts = 1227.730000, observed total counts = 1221.000000
[Wed Oct  5 00:18:50 2011] Offset between fit and detection position for source 3 = 0.397166 pixels
[Wed Oct  5 00:18:50 2011] 1227.412000 total counts/ 398.265000 bgd. counts: snr = 41.547554
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.397166 pixels
  Position = (886.9, 510.8) = 19 6 36.14 7 3 20.5
  Extent = 10.3 (9.6-11.1)" x 8.9 (8.2-9.6)", rotation angle = 324 (301-344) degrees
  Source counts = 829.1 +/- 35.0
  Background counts = 398.3
  Rate = 0.01 +/- 0.0005
[Wed Oct  5 00:18:50 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 00:18:50 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 00:18:50 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 00:18:50 2011] Source does appear to be extended
[Wed Oct  5 00:18:50 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.00
[Wed Oct  5 00:19:38 2011] Not overwriting source region fullrun_ccd2_acisf01042_pi14-548_pass1_cl_src3_src.reg
[Wed Oct  5 00:19:38 2011] Extracting stamp from image fullrun_ccd2_acisf01042_pi14-548_cl_sm2.00.img.gz, (416, 40) - (1225, 982)
[Wed Oct  5 00:19:38 2011] Writing fullrun_ccd2_acisf01042_pi14-548_pass1_cl_src3.gif
[Wed Oct  5 00:20:41 2011] ../../acisf01042/products/events/fullrun_ccd2_acisf01042_pi14-548_pass1_cl_src3_src.evt and ../../acisf01042/products/events/fullrun_ccd2_acisf01042_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Wed Oct  5 00:20:41 2011] Size of ../../acisf01042/products/events/fullrun_ccd2_acisf01042_pi14-548_pass1_cl_src3_src.evt.gz[events] = 1112 counts
[Wed Oct  5 00:20:41 2011] Mean chipx,y = (260.87, 369.05)
[Wed Oct  5 00:20:41 2011] Mean tdetx,y = (3430.05, 3825.13)
[Wed Oct  5 00:20:41 2011] chipx,y range = (166.00-345.00, 278.00-456.00)
[Wed Oct  5 00:20:41 2011] Size of ../../acisf01042/products/events/fullrun_ccd2_acisf01042_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 3493 counts
[Wed Oct  5 00:20:41 2011] ../../acisf01042/products/images/fullrun_ccd2_acisf01042_pi14-548_pass1_cl_src3_src.img and ../../acisf01042/products/images/fullrun_ccd2_acisf01042_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Wed Oct  5 00:20:41 2011] ../../acisf01042/products/spectra/fullrun_ccd2_acisf01042_pi14-548_pass1_cl_src3_src.pi and ../../acisf01042/products/spectra/fullrun_ccd2_acisf01042_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Wed Oct  5 00:22:06 2011] ../../acisf01042/products/lightcurves/fullrun_ccd2_acisf01042_pi14-548_pass1_cl_src3_src.lc and ../../acisf01042/products/lightcurves/fullrun_ccd2_acisf01042_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Wed Oct  5 00:22:08 2011] Keeping rmf generated by specextract
[Wed Oct  5 00:22:08 2011] 147.086
[Wed Oct  5 01:28:02 2011] Updating aperture counts using extracted products
[Wed Oct  5 01:28:02 2011] Error reading totcts from fullrun_ccd2_acisf01042_pi14-548_pass1_cl_src3_src.pi.gz
[Wed Oct  5 01:28:02 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct  5 01:28:02 2011] Using photon index=1.80, rate=0.0126, arf fullrun_ccd2_acisf01042_pi14-548_pass1_cl_src3.arf
[Wed Oct  5 01:28:02 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct  5 01:28:02 2011] Updating source flux to 2.7e-13
[Wed Oct  5 01:28:23 2011] Reading fit data from acisf01042/analysis//spectral/fullrun_ccd2_acisf01042_pi14-548_pass1_cl_src3_pl.csv
[Wed Oct  5 01:28:23 2011] Spectral fit parameter nH value = 1.23718e+22
[Wed Oct  5 01:28:23 2011] Spectral fit parameter PhoIndex value = 1.08718
[Wed Oct  5 01:28:23 2011] Failed to get F(0.3-8.0) from acisf01042/analysis//spectral/fullrun_ccd2_acisf01042_pi14-548_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Wed Oct  5 01:28:23 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct  5 01:28:23 2011] Using Nh = 1.2e+22, photon index=1.09, rate=0.0126, arf fullrun_ccd2_acisf01042_pi14-548_pass1_cl_src3.arf
[Wed Oct  5 01:28:23 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct  5 01:28:23 2011] Updating source flux to 3.4e-13