[Fri Oct  7 16:23:52 2011] Detection parameters:
  Position = (740.6, 898.0) = 2 58 8.30 13 23 50.2
  Extent = 0.5" x 0.5", rotation angle = 48 degrees
  Source counts = 11.8 +/- 3.5
  Background counts = 0.2
  Rate = 0.002 +/- 0.0007

[Fri Oct  7 16:23:52 2011] Off-axis axis estimate = 4.16'
[Fri Oct  7 16:24:23 2011] Using EEF radius (= 0.88 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 16:24:23 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct  7 16:24:23 2011] Initial guess for spatial extent in simple fitting = 0.88"
[Fri Oct  7 16:24:23 2011] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.954
[Fri Oct  7 16:24:23 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.88"
[Fri Oct  7 16:24:23 2011] fullrun_ccd3_acisf10418_pi14-548_cl_pass0_src1.ximg exists
[Fri Oct  7 16:24:23 2011] fullrun_ccd3_acisf10418_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Oct  7 16:24:23 2011] Fit fullrun_ccd3_acisf10418_pi14-548_cl_pass0_src1 appears to have run properly
[Fri Oct  7 16:24:23 2011] fullrun_ccd3_acisf10418_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Oct  7 16:24:23 2011] fullrun_ccd3_acisf10418_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Oct  7 16:24:23 2011] Fit fullrun_ccd3_acisf10418_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Oct  7 16:24:31 2011] Spatial fit model total counts = 13.621600, observed total counts = 14.000000
[Fri Oct  7 16:24:31 2011] Offset between fit and detection position for source 2 = 0.895651 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.895651 pixels
  Position = (740.3, 898.8) = 2 58 8.33 13 23 50.4
  Extent = 1.8 (1.8-3.5)" x 0.6 (0.5-0.9)", rotation angle = 144 (128-162) degrees
  Source counts = 13.6 +/- 3.7
  Background counts = 0.0
  Rate = 0.003 +/- 0.0008
[Fri Oct  7 16:24:31 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 16:24:31 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 16:24:31 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 16:24:31 2011] Source does appear to be extended
[Fri Oct  7 16:24:31 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.93
[Fri Oct  7 16:24:31 2011] Source is asymmetric
[Fri Oct  7 16:24:53 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct  7 16:24:53 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct  7 16:24:53 2011] Initial guess for spatial extent in simple fitting = 1.20"
[Fri Oct  7 16:24:53 2011] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.037
[Fri Oct  7 16:24:53 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.20"
[Fri Oct  7 16:24:53 2011] fullrun_ccd3_acisf10418_pi14-548_cl_pass1_src1.ximg exists
[Fri Oct  7 16:24:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10418_pi14-548_cl_pass1_src1.csv
[Fri Oct  7 16:24:53 2011] fullrun_ccd3_acisf10418_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Oct  7 16:24:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10418_pi14-548_cl_pass1_src1.csv
[Fri Oct  7 16:24:53 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10418_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10418_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 16:24:53 2011] fullrun_ccd3_acisf10418_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Oct  7 16:24:53 2011] fullrun_ccd3_acisf10418_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Oct  7 16:24:53 2011] Fit fullrun_ccd3_acisf10418_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Oct  7 16:24:58 2011] Spatial fit model total counts = 13.526500, observed total counts = 15.000000
[Fri Oct  7 16:24:58 2011] Offset between fit and detection position for source 2 = 1.144458 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 1.144458 pixels
  Position = (739.4, 898.2) = 2 58 8.36 13 23 50.1
  Extent = 1.7 (1.2-2.4)" x 0.7 (0.5-0.9)", rotation angle = 326 (307-343) degrees
  Source counts = 14.3 +/- 3.8
  Background counts = 0.0
  Rate = 0.003 +/- 0.0008
[Fri Oct  7 16:24:58 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 16:24:58 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 16:24:58 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 16:24:58 2011] Source does appear to be extended
[Fri Oct  7 16:24:58 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.32
[Fri Oct  7 16:25:55 2011] Not overwriting source region fullrun_ccd3_acisf10418_pi14-548_pass1_cl_src2_src.reg
[Fri Oct  7 16:25:55 2011] Extracting stamp from image fullrun_ccd3_acisf10418_pi14-548_cl_sm2.00.img.gz, (664, 822) - (815, 974)
[Fri Oct  7 16:25:55 2011] Writing fullrun_ccd3_acisf10418_pi14-548_pass1_cl_src2.gif
[Fri Oct  7 16:25:56 2011] ../../acisf10418/products/events/fullrun_ccd3_acisf10418_pi14-548_pass1_cl_src2_src.evt and ../../acisf10418/products/events/fullrun_ccd3_acisf10418_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Fri Oct  7 16:25:56 2011] Size of ../../acisf10418/products/events/fullrun_ccd3_acisf10418_pi14-548_pass1_cl_src2_src.evt.gz[events] = 12 counts
[Fri Oct  7 16:25:56 2011] Mean chipx,y = (495.08, 785.00)
[Fri Oct  7 16:25:56 2011] Mean tdetx,y = (4347.00, 3556.08)
[Fri Oct  7 16:25:56 2011] chipx,y range = (481.00-518.00, 770.00-803.00)
[Fri Oct  7 16:25:56 2011] Size of ../../acisf10418/products/events/fullrun_ccd3_acisf10418_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 14 counts
[Fri Oct  7 16:25:56 2011] ../../acisf10418/products/images/fullrun_ccd3_acisf10418_pi14-548_pass1_cl_src2_src.img and ../../acisf10418/products/images/fullrun_ccd3_acisf10418_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Fri Oct  7 16:25:56 2011] ../../acisf10418/products/spectra/fullrun_ccd3_acisf10418_pi14-548_pass1_cl_src2_src.pi and ../../acisf10418/products/spectra/fullrun_ccd3_acisf10418_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Fri Oct  7 16:25:56 2011] Not generating rmf since there are only 14 counts
[Fri Oct  7 16:25:58 2011] ../../acisf10418/products/lightcurves/fullrun_ccd3_acisf10418_pi14-548_pass1_cl_src2_src.lc and ../../acisf10418/products/lightcurves/fullrun_ccd3_acisf10418_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Fri Oct  7 16:26:02 2011] 158.193
[Fri Oct  7 16:26:05 2011] Updating aperture counts using extracted products
[Fri Oct  7 16:26:05 2011] Error reading totcts from fullrun_ccd3_acisf10418_pi14-548_pass1_cl_src2_src.pi.gz
[Fri Oct  7 16:26:05 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 16:26:05 2011] Using photon index=1.80, rate=0.00303, arf fullrun_ccd3_acisf10418_pi14-548_pass1_cl_src2.arf
[Fri Oct  7 16:26:05 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct  7 16:26:05 2011] Updating source flux to 4.3e-14
[Fri Oct  7 16:26:09 2011] Source 2 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Oct  7 16:26:10 2011] acisf10418/analysis//spectral/fullrun_ccd3_acisf10418_pi14-548_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete