[Mon Sep 26 04:29:23 2011] Detection parameters:
  Position = (772.6, 1113.0) = 11 47 3.07 -12 49 23.5
  Extent = 1.2" x 0.5", rotation angle = 116 degrees
  Source counts = 50.1 +/- 7.1
  Background counts = 0.9
  Rate = 0.005 +/- 0.0007

[Mon Sep 26 04:29:24 2011] Off-axis axis estimate = 5.19'
[Mon Sep 26 04:30:13 2011] Using EEF radius (= 1.26 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 04:30:13 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Sep 26 04:30:13 2011] Initial guess for spatial extent in simple fitting = 1.26"
[Mon Sep 26 04:30:13 2011] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.966
[Mon Sep 26 04:30:13 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 1.26"
[Mon Sep 26 04:30:14 2011] fullrun_ccd3_acisf10414_pi14-548_cl_pass0_src3.ximg exists
[Mon Sep 26 04:30:14 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf10414_pi14-548_cl_pass0_src3.csv
[Mon Sep 26 04:30:14 2011] fullrun_ccd3_acisf10414_pi14-548_cl_pass0_src3_1.ximg exists
[Mon Sep 26 04:30:14 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf10414_pi14-548_cl_pass0_src3.csv
[Mon Sep 26 04:30:14 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10414_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10414_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 04:30:14 2011] fullrun_ccd3_acisf10414_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Mon Sep 26 04:30:14 2011] fullrun_ccd3_acisf10414_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Mon Sep 26 04:30:14 2011] Fit fullrun_ccd3_acisf10414_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Mon Sep 26 04:30:21 2011] Spatial fit model total counts = 52.000700, observed total counts = 52.000000
[Mon Sep 26 04:30:21 2011] Offset between fit and detection position for source 8 = 0.924470 pixels
[Mon Sep 26 04:30:21 2011] 52.645800 total counts/ 15.468100 bgd. counts: snr = 9.452878
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.924470 pixels
  Position = (773.0, 1113.9) = 11 47 3.08 -12 49 23.3
  Extent = 0.8 (0.6-1.4)", rotation angle = 0
  Source counts = 37.2 +/- 7.3
  Background counts = 15.5
  Rate = 0.004 +/- 0.0007
[Mon Sep 26 04:30:21 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 04:30:21 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 04:30:21 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 04:30:21 2011] Source does appear to be extended
[Mon Sep 26 04:30:21 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 04:30:39 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Sep 26 04:30:39 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Sep 26 04:30:39 2011] Initial guess for spatial extent in simple fitting = 0.83"
[Mon Sep 26 04:30:39 2011] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.841
[Mon Sep 26 04:30:39 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 0.83"
[Mon Sep 26 04:30:39 2011] fullrun_ccd3_acisf10414_pi14-548_cl_pass1_src2.ximg exists
[Mon Sep 26 04:30:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10414_pi14-548_cl_pass1_src2.csv
[Mon Sep 26 04:30:39 2011] fullrun_ccd3_acisf10414_pi14-548_cl_pass1_src2_1.ximg exists
[Mon Sep 26 04:30:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10414_pi14-548_cl_pass1_src2.csv
[Mon Sep 26 04:30:39 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10414_pi14-548_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10414_pi14-548_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 04:30:39 2011] fullrun_ccd3_acisf10414_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Mon Sep 26 04:30:39 2011] fullrun_ccd3_acisf10414_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Mon Sep 26 04:30:39 2011] Fit fullrun_ccd3_acisf10414_pi14-548_cl_pass1_tfrozen_src2 appears to have run properly
[Mon Sep 26 04:30:47 2011] Spatial fit model total counts = 52.988500, observed total counts = 53.000000
[Mon Sep 26 04:30:47 2011] Offset between fit and detection position for source 8 = 0.040155 pixels
[Mon Sep 26 04:30:47 2011] 52.947800 total counts/ 14.096700 bgd. counts: snr = 10.347718
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.040155 pixels
  Position = (773.0, 1113.9) = 11 47 3.07 -12 49 23.3
  Extent = 0.9 (0.6-1.4)", rotation angle = 0
  Source counts = 38.9 +/- 7.3
  Background counts = 14.1
  Rate = 0.004 +/- 0.0007
[Mon Sep 26 04:30:47 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 04:30:47 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 04:30:47 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 04:30:47 2011] Source does appear to be extended
[Mon Sep 26 04:30:47 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 04:32:33 2011] Not overwriting source region fullrun_ccd3_acisf10414_pi14-548_pass1_cl_src8_src.reg
[Mon Sep 26 04:32:33 2011] Extracting stamp from image fullrun_ccd3_acisf10414_pi14-548_cl_sm2.00.img.gz, (733, 1074) - (813, 1154)
[Mon Sep 26 04:32:33 2011] Writing fullrun_ccd3_acisf10414_pi14-548_pass1_cl_src8.gif
[Mon Sep 26 04:32:41 2011] ../../acisf10414/products/events/fullrun_ccd3_acisf10414_pi14-548_pass1_cl_src8_src.evt and ../../acisf10414/products/events/fullrun_ccd3_acisf10414_pi14-548_pass1_cl_src8_bgd.evt exist, delete to re-create
[Mon Sep 26 04:32:41 2011] Size of ../../acisf10414/products/events/fullrun_ccd3_acisf10414_pi14-548_pass1_cl_src8_src.evt.gz[events] = 50 counts
[Mon Sep 26 04:32:41 2011] Mean chipx,y = (198.42, 770.04)
[Mon Sep 26 04:32:41 2011] Mean tdetx,y = (4361.96, 3259.42)
[Mon Sep 26 04:32:41 2011] chipx,y range = (182.00-215.00, 748.00-789.00)
[Mon Sep 26 04:32:41 2011] Size of ../../acisf10414/products/events/fullrun_ccd3_acisf10414_pi14-548_pass1_cl_src8_bgd.evt.gz[events] = 10 counts
[Mon Sep 26 04:32:41 2011] ../../acisf10414/products/images/fullrun_ccd3_acisf10414_pi14-548_pass1_cl_src8_src.img and ../../acisf10414/products/images/fullrun_ccd3_acisf10414_pi14-548_pass1_cl_src8_bgd.img exist, delete to re-create
[Mon Sep 26 04:32:41 2011] ../../acisf10414/products/spectra/fullrun_ccd3_acisf10414_pi14-548_pass1_cl_src8_src.pi and ../../acisf10414/products/spectra/fullrun_ccd3_acisf10414_pi14-548_pass1_cl_src8_bgd.pi exist, delete to re-create
[Mon Sep 26 04:32:41 2011] Not generating rmf since there are only 38 counts
[Mon Sep 26 04:32:44 2011] ../../acisf10414/products/lightcurves/fullrun_ccd3_acisf10414_pi14-548_pass1_cl_src8_src.lc and ../../acisf10414/products/lightcurves/fullrun_ccd3_acisf10414_pi14-548_pass1_cl_src8_bgd.lc exist, delete to re-create
[Mon Sep 26 04:33:12 2011] 179.999
[Mon Sep 26 04:33:19 2011] Updating aperture counts using extracted products
[Mon Sep 26 04:33:19 2011] Error reading totcts from fullrun_ccd3_acisf10414_pi14-548_pass1_cl_src8_src.pi.gz
[Mon Sep 26 04:33:19 2011] Calculating source flux in energy range 0.30-8.00
[Mon Sep 26 04:33:19 2011] Using photon index=1.80, rate=0.00392, arf fullrun_ccd3_acisf10414_pi14-548_pass1_cl_src8.arf
[Mon Sep 26 04:33:19 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Sep 26 04:33:19 2011] Updating source flux to 5.2e-14
[Mon Sep 26 04:33:27 2011] Source 8 has fewer than 100.000000 counts, skipping spectral fitting