[Mon Sep 26 04:29:20 2011] Detection parameters:
  Position = (1177.2, 745.9) = 11 47 13.65 -12 46 22.0
  Extent = 0.9" x 0.5", rotation angle = 17 degrees
  Source counts = 11.6 +/- 3.5
  Background counts = 0.4
  Rate = 0.001 +/- 0.0003

[Mon Sep 26 04:29:21 2011] Off-axis axis estimate = 5.38'
[Mon Sep 26 04:30:10 2011] Using EEF radius (= 1.34 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 04:30:10 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Sep 26 04:30:10 2011] Initial guess for spatial extent in simple fitting = 1.34"
[Mon Sep 26 04:30:10 2011] source mask rpix=2.7, npix_max = 41, mask sum = 36, frac = 0.868
[Mon Sep 26 04:30:10 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 1.34"
[Mon Sep 26 04:30:11 2011] fullrun_ccd2_acisf10414_pi14-548_cl_pass0_src3.ximg exists
[Mon Sep 26 04:30:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10414_pi14-548_cl_pass0_src3.csv
[Mon Sep 26 04:30:11 2011] fullrun_ccd2_acisf10414_pi14-548_cl_pass0_src3_1.ximg exists
[Mon Sep 26 04:30:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10414_pi14-548_cl_pass0_src3.csv
[Mon Sep 26 04:30:11 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10414_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10414_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 04:30:11 2011] fullrun_ccd2_acisf10414_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Mon Sep 26 04:30:11 2011] fullrun_ccd2_acisf10414_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Mon Sep 26 04:30:11 2011] Fit fullrun_ccd2_acisf10414_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Mon Sep 26 04:30:19 2011] Spatial fit model total counts = 13.679900, observed total counts = 14.000000
[Mon Sep 26 04:30:19 2011] Offset between fit and detection position for source 2 = 0.742662 pixels
[Mon Sep 26 04:30:19 2011] 13.392890 total counts/ 1.591790 bgd. counts: snr = 9.353617
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.742662 pixels
  Position = (1177.8, 746.3) = 11 47 13.65 -12 46 22.1
  Extent = 0.9 (0.6-1.2)", rotation angle = 0
  Source counts = 11.8 +/- 3.7
  Background counts = 1.6
  Rate = 0.001 +/- 0.0004
[Mon Sep 26 04:30:19 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 04:30:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 04:30:19 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 04:30:19 2011] Source does appear to be extended
[Mon Sep 26 04:30:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 04:30:38 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Sep 26 04:30:38 2011] Initial guess for spatial extent in simple fitting = 0.94"
[Mon Sep 26 04:30:38 2011] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.073
[Mon Sep 26 04:30:38 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 0.94"
[Mon Sep 26 04:30:39 2011] fullrun_ccd2_acisf10414_pi14-548_cl_pass1_src3.ximg exists
[Mon Sep 26 04:30:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10414_pi14-548_cl_pass1_src3.csv
[Mon Sep 26 04:30:39 2011] fullrun_ccd2_acisf10414_pi14-548_cl_pass1_src3_1.ximg exists
[Mon Sep 26 04:30:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10414_pi14-548_cl_pass1_src3.csv
[Mon Sep 26 04:30:39 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10414_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10414_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 04:30:39 2011] fullrun_ccd2_acisf10414_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Mon Sep 26 04:30:39 2011] fullrun_ccd2_acisf10414_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Mon Sep 26 04:30:39 2011] Fit fullrun_ccd2_acisf10414_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Mon Sep 26 04:30:46 2011] Spatial fit model total counts = 13.195500, observed total counts = 14.000000
[Mon Sep 26 04:30:46 2011] Offset between fit and detection position for source 2 = 0.105085 pixels
[Mon Sep 26 04:30:46 2011] 12.662480 total counts/ 1.145180 bgd. counts: snr = 10.762516
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.105085 pixels
  Position = (1177.9, 746.4) = 11 47 13.64 -12 46 22.1
  Extent = 1.0 (0.6-1.4)", rotation angle = 0
  Source counts = 11.5 +/- 3.6
  Background counts = 1.1
  Rate = 0.001 +/- 0.0004
[Mon Sep 26 04:30:46 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 04:30:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 04:30:46 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 04:30:46 2011] Source does appear to be extended
[Mon Sep 26 04:30:46 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 04:31:46 2011] Not overwriting source region fullrun_ccd2_acisf10414_pi14-548_pass1_cl_src2_src.reg
[Mon Sep 26 04:31:46 2011] Extracting stamp from image fullrun_ccd2_acisf10414_pi14-548_cl_sm2.00.img.gz, (1134, 702) - (1222, 790)
[Mon Sep 26 04:31:46 2011] Writing fullrun_ccd2_acisf10414_pi14-548_pass1_cl_src2.gif
[Mon Sep 26 04:31:54 2011] ../../acisf10414/products/events/fullrun_ccd2_acisf10414_pi14-548_pass1_cl_src2_src.evt and ../../acisf10414/products/events/fullrun_ccd2_acisf10414_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Mon Sep 26 04:31:54 2011] Size of ../../acisf10414/products/events/fullrun_ccd2_acisf10414_pi14-548_pass1_cl_src2_src.evt.gz[events] = 14 counts
[Mon Sep 26 04:31:54 2011] Mean chipx,y = (854.71, 810.79)
[Mon Sep 26 04:31:54 2011] Mean tdetx,y = (3871.79, 3231.29)
[Mon Sep 26 04:31:54 2011] chipx,y range = (841.00-872.00, 799.00-836.00)
[Mon Sep 26 04:31:54 2011] Size of ../../acisf10414/products/events/fullrun_ccd2_acisf10414_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 6 counts
[Mon Sep 26 04:31:55 2011] ../../acisf10414/products/images/fullrun_ccd2_acisf10414_pi14-548_pass1_cl_src2_src.img and ../../acisf10414/products/images/fullrun_ccd2_acisf10414_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Mon Sep 26 04:31:55 2011] ../../acisf10414/products/spectra/fullrun_ccd2_acisf10414_pi14-548_pass1_cl_src2_src.pi and ../../acisf10414/products/spectra/fullrun_ccd2_acisf10414_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Mon Sep 26 04:31:55 2011] Not generating rmf since there are only 11 counts
[Mon Sep 26 04:31:58 2011] ../../acisf10414/products/lightcurves/fullrun_ccd2_acisf10414_pi14-548_pass1_cl_src2_src.lc and ../../acisf10414/products/lightcurves/fullrun_ccd2_acisf10414_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Mon Sep 26 04:32:33 2011] 177.467
[Mon Sep 26 04:33:19 2011] Updating aperture counts using extracted products
[Mon Sep 26 04:33:19 2011] Error reading totcts from fullrun_ccd2_acisf10414_pi14-548_pass1_cl_src2_src.pi.gz
[Mon Sep 26 04:33:19 2011] Calculating source flux in energy range 0.30-8.00
[Mon Sep 26 04:33:19 2011] Using photon index=1.80, rate=0.00116, arf fullrun_ccd2_acisf10414_pi14-548_pass1_cl_src2.arf
[Mon Sep 26 04:33:19 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Sep 26 04:33:19 2011] Updating source flux to 1.5e-14
[Mon Sep 26 04:33:26 2011] Source 2 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Sep 26 04:33:27 2011] acisf10414/analysis//spectral/fullrun_ccd2_acisf10414_pi14-548_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete