[Sat Oct 15 03:41:48 2011] Detection parameters:
  Position = (682.8, 131.1) = 0 25 28.71 -12 25 57.4
  Extent = 0.6" x 0.5", rotation angle = 26 degrees
  Source counts = 14.9 +/- 4.1
  Background counts = 2.1
  Rate = 0.0002 +/- 5e-05

[Sat Oct 15 03:41:48 2011] Off-axis axis estimate = 3.03'
[Sat Oct 15 03:42:54 2011] Using EEF radius (= 0.59 ")to estimate initial spatial extent for simple fitting
[Sat Oct 15 03:42:54 2011] Initial guess for spatial extent in simple fitting = 0.59"
[Sat Oct 15 03:42:54 2011] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.048
[Sat Oct 15 03:42:54 2011] Giving source the simple spatial ID 14 for pass 0, mean size = 0.59"
[Sat Oct 15 03:42:55 2011] fullrun_ccd3_acisf10413_pi14-548_cl_pass0_src14.ximg exists
[Sat Oct 15 03:42:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10413_pi14-548_cl_pass0_src14.csv
[Sat Oct 15 03:42:55 2011] fullrun_ccd3_acisf10413_pi14-548_cl_pass0_src14_1.ximg exists
[Sat Oct 15 03:42:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10413_pi14-548_cl_pass0_src14.csv
[Sat Oct 15 03:42:55 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10413_pi14-548_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10413_pi14-548_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 03:42:55 2011] fullrun_ccd3_acisf10413_pi14-548_cl_pass0_tfrozen_src14.ximg exists
[Sat Oct 15 03:42:55 2011] fullrun_ccd3_acisf10413_pi14-548_cl_pass0_tfrozen_src14_1.ximg exists
[Sat Oct 15 03:42:55 2011] Fit fullrun_ccd3_acisf10413_pi14-548_cl_pass0_tfrozen_src14 appears to have run properly
[Sat Oct 15 03:43:10 2011] Spatial fit model total counts = 23.999800, observed total counts = 24.000000
[Sat Oct 15 03:43:10 2011] Offset between fit and detection position for source 44 = 0.698797 pixels
[Sat Oct 15 03:43:10 2011] 24.066750 total counts/ 9.258050 bgd. counts: snr = 4.866953
Spatial fit parameters:
  Offset between fit and detection position for source 44 = 0.698797 pixels
  Position = (683.3, 131.5) = 0 25 28.71 -12 25 57.4
  Extent = 0.7 (0.5-1.0)", rotation angle = 0
  Source counts = 14.8 +/- 4.9
  Background counts = 9.3
  Rate = 0.0002 +/- 6e-05
[Sat Oct 15 03:43:10 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 03:43:10 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 03:43:10 2011] Assessing source extent using major axis lower bound
[Sat Oct 15 03:43:10 2011] Source does appear to be extended
[Sat Oct 15 03:43:10 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 15 03:43:35 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 15 03:43:35 2011] Initial guess for spatial extent in simple fitting = 0.71"
[Sat Oct 15 03:43:35 2011] source mask rpix=1.4, npix_max = 15, mask sum = 12, frac = 0.799
[Sat Oct 15 03:43:35 2011] Giving source the simple spatial ID 13 for pass 1, mean size = 0.71"
[Sat Oct 15 03:43:37 2011] fullrun_ccd3_acisf10413_pi14-548_cl_pass1_src13.ximg exists
[Sat Oct 15 03:43:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10413_pi14-548_cl_pass1_src13.csv
[Sat Oct 15 03:43:37 2011] fullrun_ccd3_acisf10413_pi14-548_cl_pass1_src13_1.ximg exists
[Sat Oct 15 03:43:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10413_pi14-548_cl_pass1_src13.csv
[Sat Oct 15 03:43:37 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10413_pi14-548_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10413_pi14-548_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 03:43:38 2011] fullrun_ccd3_acisf10413_pi14-548_cl_pass1_tfrozen_src13.ximg exists
[Sat Oct 15 03:43:38 2011] fullrun_ccd3_acisf10413_pi14-548_cl_pass1_tfrozen_src13_1.ximg exists
[Sat Oct 15 03:43:38 2011] Fit fullrun_ccd3_acisf10413_pi14-548_cl_pass1_tfrozen_src13 appears to have run properly
[Sat Oct 15 03:43:58 2011] Spatial fit model total counts = 23.999700, observed total counts = 24.000000
[Sat Oct 15 03:43:58 2011] Offset between fit and detection position for source 44 = 0.003622 pixels
[Sat Oct 15 03:43:58 2011] 24.064940 total counts/ 9.202640 bgd. counts: snr = 4.899252
Spatial fit parameters:
  Offset between fit and detection position for source 44 = 0.003622 pixels
  Position = (683.3, 131.5) = 0 25 28.71 -12 25 57.4
  Extent = 0.7 (0.5-1.0)", rotation angle = 0
  Source counts = 14.9 +/- 4.9
  Background counts = 9.2
  Rate = 0.0002 +/- 6e-05
[Sat Oct 15 03:43:58 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 03:43:58 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 03:43:58 2011] Assessing source extent using major axis lower bound
[Sat Oct 15 03:43:58 2011] Source does appear to be extended
[Sat Oct 15 03:43:58 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 15 03:49:04 2011] Not overwriting source region fullrun_ccd3_acisf10413_pi14-548_pass1_cl_src44_src.reg
[Sat Oct 15 03:49:04 2011] Extracting stamp from image fullrun_ccd3_acisf10413_pi14-548_cl_sm2.00.img.gz, (651, 99) - (716, 164)
[Sat Oct 15 03:49:05 2011] Writing fullrun_ccd3_acisf10413_pi14-548_pass1_cl_src44.gif
[Sat Oct 15 03:49:45 2011] ../../acisf10413/products/events/fullrun_ccd3_acisf10413_pi14-548_pass1_cl_src44_src.evt and ../../acisf10413/products/events/fullrun_ccd3_acisf10413_pi14-548_pass1_cl_src44_bgd.evt exist, delete to re-create
[Sat Oct 15 03:49:45 2011] Size of ../../acisf10413/products/events/fullrun_ccd3_acisf10413_pi14-548_pass1_cl_src44_src.evt.gz[events] = 18 counts
[Sat Oct 15 03:49:45 2011] Mean chipx,y = (960.61, 893.78)
[Sat Oct 15 03:49:45 2011] Mean tdetx,y = (4238.22, 4021.61)
[Sat Oct 15 03:49:45 2011] chipx,y range = (943.00-978.00, 879.00-909.00)
[Sat Oct 15 03:49:46 2011] Size of ../../acisf10413/products/events/fullrun_ccd3_acisf10413_pi14-548_pass1_cl_src44_bgd.evt.gz[events] = 31 counts
[Sat Oct 15 03:49:46 2011] ../../acisf10413/products/images/fullrun_ccd3_acisf10413_pi14-548_pass1_cl_src44_src.img and ../../acisf10413/products/images/fullrun_ccd3_acisf10413_pi14-548_pass1_cl_src44_bgd.img exist, delete to re-create
[Sat Oct 15 03:49:46 2011] ../../acisf10413/products/spectra/fullrun_ccd3_acisf10413_pi14-548_pass1_cl_src44_src.pi and ../../acisf10413/products/spectra/fullrun_ccd3_acisf10413_pi14-548_pass1_cl_src44_bgd.pi exist, delete to re-create
[Sat Oct 15 03:49:46 2011] Not generating rmf since there are only 14 counts
[Sat Oct 15 03:49:48 2011] ../../acisf10413/products/lightcurves/fullrun_ccd3_acisf10413_pi14-548_pass1_cl_src44_src.lc and ../../acisf10413/products/lightcurves/fullrun_ccd3_acisf10413_pi14-548_pass1_cl_src44_bgd.lc exist, delete to re-create
[Sat Oct 15 03:51:16 2011] 199.955
[Sat Oct 15 03:51:26 2011] Updating aperture counts using extracted products
[Sat Oct 15 03:51:26 2011] Error reading totcts from fullrun_ccd3_acisf10413_pi14-548_pass1_cl_src44_src.pi.gz
[Sat Oct 15 03:51:27 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 15 03:51:27 2011] Using photon index=1.80, rate=0.000196, arf fullrun_ccd3_acisf10413_pi14-548_pass1_cl_src44.arf
[Sat Oct 15 03:51:27 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 15 03:51:27 2011] Updating source flux to 2.3e-15
[Sat Oct 15 03:52:10 2011] Source 44 has fewer than 100.000000 counts, skipping spectral fitting