[Sat Oct 15 03:41:37 2011] Detection parameters:
  Position = (911.0, 627.3) = 0 25 49.09 -12 26 59.8
  Extent = 0.6" x 0.5", rotation angle = 80 degrees
  Source counts = 834.1 +/- 29.1
  Background counts = 9.9
  Rate = 0.01 +/- 0.0004

[Sat Oct 15 03:41:44 2011] Off-axis axis estimate = 3.60'
[Sat Oct 15 03:42:51 2011] Using EEF radius (= 0.72 ")to estimate initial spatial extent for simple fitting
[Sat Oct 15 03:42:51 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct 15 03:42:51 2011] Initial guess for spatial extent in simple fitting = 0.72"
[Sat Oct 15 03:42:51 2011] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.040
[Sat Oct 15 03:42:51 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.72"
[Sat Oct 15 03:42:53 2011] fullrun_ccd2_acisf10413_pi14-548_cl_pass0_src1.ximg exists
[Sat Oct 15 03:42:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10413_pi14-548_cl_pass0_src1.csv
[Sat Oct 15 03:42:53 2011] fullrun_ccd2_acisf10413_pi14-548_cl_pass0_src1_1.ximg exists
[Sat Oct 15 03:42:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10413_pi14-548_cl_pass0_src1.csv
[Sat Oct 15 03:42:53 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10413_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10413_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 03:42:53 2011] fullrun_ccd2_acisf10413_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sat Oct 15 03:42:53 2011] fullrun_ccd2_acisf10413_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Oct 15 03:42:53 2011] Fit fullrun_ccd2_acisf10413_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Oct 15 03:43:07 2011] Source 1 is offset by 5.835031 and -6.573312 pixels which is larger than
2 X fitted extent = 0.730630 x 0.730630, not incorporating fit results
[Sat Oct 15 03:43:07 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 03:43:07 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 03:43:07 2011] Assessing source extent using major
[Sat Oct 15 03:43:07 2011] Source does appear to be extended
[Sat Oct 15 03:43:07 2011] Computing asymmetry using major and minor axis, asym = 1.24
[Sat Oct 15 03:43:33 2011] Using EEF radius (= 0.72 ")to estimate initial spatial extent for simple fitting
[Sat Oct 15 03:43:33 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct 15 03:43:33 2011] Initial guess for spatial extent in simple fitting = 0.72"
[Sat Oct 15 03:43:33 2011] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.040
[Sat Oct 15 03:43:33 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.72"
[Sat Oct 15 03:43:33 2011] fullrun_ccd2_acisf10413_pi14-548_cl_pass1_src1.ximg exists
[Sat Oct 15 03:43:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10413_pi14-548_cl_pass1_src1.csv
[Sat Oct 15 03:43:33 2011] fullrun_ccd2_acisf10413_pi14-548_cl_pass1_src1_1.ximg exists
[Sat Oct 15 03:43:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10413_pi14-548_cl_pass1_src1.csv
[Sat Oct 15 03:43:33 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10413_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10413_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 03:43:34 2011] fullrun_ccd2_acisf10413_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sat Oct 15 03:43:34 2011] fullrun_ccd2_acisf10413_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Oct 15 03:43:34 2011] Fit fullrun_ccd2_acisf10413_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Oct 15 03:43:55 2011] Spatial fit model total counts = 842.000000, observed total counts = 842.000000
[Sat Oct 15 03:43:55 2011] Offset between fit and detection position for source 1 = 0.675184 pixels
[Sat Oct 15 03:43:55 2011] 843.237800 total counts/ 47.162800 bgd. counts: snr = 115.918885
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.675184 pixels
  Position = (911.5, 627.7) = 0 25 49.09 -12 26 59.8
  Extent = 0.7 (0.7-0.8)", rotation angle = 0
  Source counts = 796.1 +/- 29.0
  Background counts = 47.2
  Rate = 0.01 +/- 0.0004
[Sat Oct 15 03:43:55 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 03:43:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 03:43:55 2011] Assessing source extent using major axis lower bound
[Sat Oct 15 03:43:55 2011] Source does appear to be extended
[Sat Oct 15 03:43:55 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 15 03:45:41 2011] Not overwriting source region fullrun_ccd2_acisf10413_pi14-548_pass1_cl_src1_src.reg
[Sat Oct 15 03:45:41 2011] Extracting stamp from image fullrun_ccd2_acisf10413_pi14-548_cl_sm2.00.img.gz, (879, 595) - (944, 661)
[Sat Oct 15 03:45:41 2011] Writing fullrun_ccd2_acisf10413_pi14-548_pass1_cl_src1.gif
[Sat Oct 15 03:45:45 2011] ../../acisf10413/products/events/fullrun_ccd2_acisf10413_pi14-548_pass1_cl_src1_src.evt and ../../acisf10413/products/events/fullrun_ccd2_acisf10413_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Sat Oct 15 03:45:45 2011] Size of ../../acisf10413/products/events/fullrun_ccd2_acisf10413_pi14-548_pass1_cl_src1_src.evt.gz[events] = 828 counts
[Sat Oct 15 03:45:45 2011] Mean chipx,y = (325.60, 617.07)
[Sat Oct 15 03:45:45 2011] Mean tdetx,y = (3678.07, 3760.40)
[Sat Oct 15 03:45:45 2011] chipx,y range = (304.00-346.00, 596.00-639.00)
[Sat Oct 15 03:45:46 2011] Size of ../../acisf10413/products/events/fullrun_ccd2_acisf10413_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 43 counts
[Sat Oct 15 03:45:46 2011] ../../acisf10413/products/images/fullrun_ccd2_acisf10413_pi14-548_pass1_cl_src1_src.img and ../../acisf10413/products/images/fullrun_ccd2_acisf10413_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Sat Oct 15 03:45:46 2011] ../../acisf10413/products/spectra/fullrun_ccd2_acisf10413_pi14-548_pass1_cl_src1_src.pi and ../../acisf10413/products/spectra/fullrun_ccd2_acisf10413_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Sat Oct 15 03:45:49 2011] ../../acisf10413/products/lightcurves/fullrun_ccd2_acisf10413_pi14-548_pass1_cl_src1_src.lc and ../../acisf10413/products/lightcurves/fullrun_ccd2_acisf10413_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Sat Oct 15 03:49:02 2011] Keeping rmf generated by specextract
[Sat Oct 15 03:49:02 2011] 192.454
[Sat Oct 15 03:51:25 2011] Updating aperture counts using extracted products
[Sat Oct 15 03:51:25 2011] Error reading totcts from fullrun_ccd2_acisf10413_pi14-548_pass1_cl_src1_src.pi.gz
[Sat Oct 15 03:51:26 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 15 03:51:26 2011] Using photon index=1.80, rate=0.0105, arf fullrun_ccd2_acisf10413_pi14-548_pass1_cl_src1.arf
[Sat Oct 15 03:51:26 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 15 03:51:26 2011] Updating source flux to 1.3e-13
[Sat Oct 15 03:51:58 2011] Flag b found in src. 1 procflags, skipping spectral fitting
[Sat Oct 15 03:52:10 2011] Reading fit data from acisf10413/analysis//spectral/fullrun_ccd2_acisf10413_pi14-548_pass1_cl_src1_pl.csv
[Sat Oct 15 03:52:10 2011] Spectral fit parameter nH value = 5.51033e+13
[Sat Oct 15 03:52:10 2011] Spectral fit parameter PhoIndex value = 1.83432
[Sat Oct 15 03:52:10 2011] Failed to get F(0.3-8.0) from acisf10413/analysis//spectral/fullrun_ccd2_acisf10413_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sat Oct 15 03:52:10 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 15 03:52:10 2011] Using Nh = 5.5e+13, photon index=1.83, rate=0.0105, arf fullrun_ccd2_acisf10413_pi14-548_pass1_cl_src1.arf
[Sat Oct 15 03:52:10 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 15 03:52:10 2011] Updating source flux to 1.3e-13