[Thu Sep 29 23:22:08 2011] Detection parameters:
  Position = (528.0, 539.8) = 18 29 44.00 69 12 22.3
  Extent = 0.8" x 0.7", rotation angle = 101 degrees
  Source counts = 22.5 +/- 4.9
  Background counts = 1.5
  Rate = 0.0007 +/- 0.0001

[Thu Sep 29 23:22:10 2011] Off-axis axis estimate = 5.64'
[Thu Sep 29 23:22:58 2011] Using EEF radius (= 1.46 ")to estimate initial spatial extent for simple fitting
[Thu Sep 29 23:22:58 2011] Initial guess for spatial extent in simple fitting = 1.46"
[Thu Sep 29 23:22:58 2011] source mask rpix=3.0, npix_max = 47, mask sum = 42, frac = 0.877
[Thu Sep 29 23:22:58 2011] Giving source the simple spatial ID 11 for pass 0, mean size = 1.46"
[Thu Sep 29 23:22:58 2011] fullrun_ccd3_acisf10412_pi14-548_cl_pass0_src11.ximg exists
[Thu Sep 29 23:22:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10412_pi14-548_cl_pass0_src11.csv
[Thu Sep 29 23:22:58 2011] fullrun_ccd3_acisf10412_pi14-548_cl_pass0_src11_1.ximg exists
[Thu Sep 29 23:22:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10412_pi14-548_cl_pass0_src11.csv
[Thu Sep 29 23:22:58 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10412_pi14-548_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10412_pi14-548_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 23:22:59 2011] fullrun_ccd3_acisf10412_pi14-548_cl_pass0_tfrozen_src11.ximg exists
[Thu Sep 29 23:22:59 2011] fullrun_ccd3_acisf10412_pi14-548_cl_pass0_tfrozen_src11_1.ximg exists
[Thu Sep 29 23:22:59 2011] Fit fullrun_ccd3_acisf10412_pi14-548_cl_pass0_tfrozen_src11 appears to have run properly
[Thu Sep 29 23:23:11 2011] Spatial fit model total counts = 23.438000, observed total counts = 24.000000
[Thu Sep 29 23:23:11 2011] Offset between fit and detection position for source 9 = 0.668190 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.668190 pixels
  Position = (528.5, 540.3) = 18 29 44.00 69 12 22.3
  Extent = 1.0 (0.7-1.1)", rotation angle = 0
  Source counts = 23.6 +/- 4.9
  Background counts = 0.0
  Rate = 0.0007 +/- 0.0001
[Thu Sep 29 23:23:11 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 23:23:11 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 23:23:11 2011] Assessing source extent using major axis lower bound
[Thu Sep 29 23:23:11 2011] Source does appear to be extended
[Thu Sep 29 23:23:11 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 23:23:30 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Sep 29 23:23:30 2011] Initial guess for spatial extent in simple fitting = 0.96"
[Thu Sep 29 23:23:30 2011] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.042
[Thu Sep 29 23:23:30 2011] Giving source the simple spatial ID 11 for pass 1, mean size = 0.96"
[Thu Sep 29 23:23:31 2011] fullrun_ccd3_acisf10412_pi14-548_cl_pass1_src11.ximg exists
[Thu Sep 29 23:23:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10412_pi14-548_cl_pass1_src11.csv
[Thu Sep 29 23:23:31 2011] fullrun_ccd3_acisf10412_pi14-548_cl_pass1_src11_1.ximg exists
[Thu Sep 29 23:23:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10412_pi14-548_cl_pass1_src11.csv
[Thu Sep 29 23:23:31 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10412_pi14-548_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10412_pi14-548_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 23:23:31 2011] fullrun_ccd3_acisf10412_pi14-548_cl_pass1_tfrozen_src11.ximg exists
[Thu Sep 29 23:23:31 2011] fullrun_ccd3_acisf10412_pi14-548_cl_pass1_tfrozen_src11_1.ximg exists
[Thu Sep 29 23:23:31 2011] Fit fullrun_ccd3_acisf10412_pi14-548_cl_pass1_tfrozen_src11 appears to have run properly
[Thu Sep 29 23:23:42 2011] Spatial fit model total counts = 22.485600, observed total counts = 24.000000
[Thu Sep 29 23:23:42 2011] Offset between fit and detection position for source 9 = 0.146183 pixels
[Thu Sep 29 23:23:42 2011] 22.887904 total counts/ 0.000004 bgd. counts: snr = 11065.171489
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.146183 pixels
  Position = (528.4, 540.2) = 18 29 44.01 69 12 22.2
  Extent = 0.9 (0.6-1.1)", rotation angle = 0
  Source counts = 22.9 +/- 4.8
  Background counts = 0.0
  Rate = 0.0007 +/- 0.0001
[Thu Sep 29 23:23:42 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 23:23:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 23:23:42 2011] Assessing source extent using major axis lower bound
[Thu Sep 29 23:23:42 2011] Source does appear to be extended
[Thu Sep 29 23:23:42 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 23:26:58 2011] Not overwriting source region fullrun_ccd3_acisf10412_pi14-548_pass1_cl_src9_src.reg
[Thu Sep 29 23:26:58 2011] Extracting stamp from image fullrun_ccd3_acisf10412_pi14-548_cl_sm2.00.img.gz, (487, 499) - (570, 582)
[Thu Sep 29 23:26:58 2011] Writing fullrun_ccd3_acisf10412_pi14-548_pass1_cl_src9.gif
[Thu Sep 29 23:27:32 2011] ../../acisf10412/products/events/fullrun_ccd3_acisf10412_pi14-548_pass1_cl_src9_src.evt and ../../acisf10412/products/events/fullrun_ccd3_acisf10412_pi14-548_pass1_cl_src9_bgd.evt exist, delete to re-create
[Thu Sep 29 23:27:32 2011] Size of ../../acisf10412/products/events/fullrun_ccd3_acisf10412_pi14-548_pass1_cl_src9_src.evt.gz[events] = 24 counts
[Thu Sep 29 23:27:32 2011] Mean chipx,y = (326.88, 444.67)
[Thu Sep 29 23:27:32 2011] Mean tdetx,y = (4687.33, 3387.88)
[Thu Sep 29 23:27:32 2011] chipx,y range = (306.00-342.00, 422.00-462.00)
[Thu Sep 29 23:27:32 2011] Size of ../../acisf10412/products/events/fullrun_ccd3_acisf10412_pi14-548_pass1_cl_src9_bgd.evt.gz[events] = 25 counts
[Thu Sep 29 23:27:32 2011] ../../acisf10412/products/images/fullrun_ccd3_acisf10412_pi14-548_pass1_cl_src9_src.img and ../../acisf10412/products/images/fullrun_ccd3_acisf10412_pi14-548_pass1_cl_src9_bgd.img exist, delete to re-create
[Thu Sep 29 23:27:32 2011] ../../acisf10412/products/spectra/fullrun_ccd3_acisf10412_pi14-548_pass1_cl_src9_src.pi and ../../acisf10412/products/spectra/fullrun_ccd3_acisf10412_pi14-548_pass1_cl_src9_bgd.pi exist, delete to re-create
[Thu Sep 29 23:27:32 2011] Not generating rmf since there are only 22 counts
[Thu Sep 29 23:27:36 2011] ../../acisf10412/products/lightcurves/fullrun_ccd3_acisf10412_pi14-548_pass1_cl_src9_src.lc and ../../acisf10412/products/lightcurves/fullrun_ccd3_acisf10412_pi14-548_pass1_cl_src9_bgd.lc exist, delete to re-create
[Thu Sep 29 23:28:14 2011] 182.186
[Thu Sep 29 23:28:25 2011] Updating aperture counts using extracted products
[Thu Sep 29 23:28:25 2011] Error reading totcts from fullrun_ccd3_acisf10412_pi14-548_pass1_cl_src9_src.pi.gz
[Thu Sep 29 23:28:25 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 29 23:28:25 2011] Using photon index=1.80, rate=0.000662, arf fullrun_ccd3_acisf10412_pi14-548_pass1_cl_src9.arf
[Thu Sep 29 23:28:25 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Sep 29 23:28:25 2011] Updating source flux to 8.4e-15
[Thu Sep 29 23:28:34 2011] Source 9 has fewer than 100.000000 counts, skipping spectral fitting