[Thu Sep 29 23:22:10 2011] Detection parameters:
  Position = (262.5, 855.8) = 18 30 8.71 69 14 57.1
  Extent = 1.6" x 1.1", rotation angle = 104 degrees
  Source counts = 17.6 +/- 4.6
  Background counts = 3.4
  Rate = 0.0005 +/- 0.0001

[Thu Sep 29 23:22:10 2011] Off-axis axis estimate = 7.93'
[Thu Sep 29 23:22:58 2011] Using EEF radius (= 2.78 ")to estimate initial spatial extent for simple fitting
[Thu Sep 29 23:22:58 2011] Initial guess for spatial extent in simple fitting = 2.78"
[Thu Sep 29 23:22:58 2011] source mask rpix=5.7, npix_max = 151, mask sum = 156, frac = 1.031
[Thu Sep 29 23:22:58 2011] Giving source the simple spatial ID 13 for pass 0, mean size = 2.78"
[Thu Sep 29 23:22:58 2011] fullrun_ccd3_acisf10412_pi14-548_cl_pass0_src13.ximg exists
[Thu Sep 29 23:22:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10412_pi14-548_cl_pass0_src13.csv
[Thu Sep 29 23:22:59 2011] fullrun_ccd3_acisf10412_pi14-548_cl_pass0_src13_1.ximg exists
[Thu Sep 29 23:22:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10412_pi14-548_cl_pass0_src13.csv
[Thu Sep 29 23:22:59 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10412_pi14-548_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10412_pi14-548_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 23:22:59 2011] fullrun_ccd3_acisf10412_pi14-548_cl_pass0_tfrozen_src13.ximg exists
[Thu Sep 29 23:22:59 2011] fullrun_ccd3_acisf10412_pi14-548_cl_pass0_tfrozen_src13_1.ximg exists
[Thu Sep 29 23:22:59 2011] Fit fullrun_ccd3_acisf10412_pi14-548_cl_pass0_tfrozen_src13 appears to have run properly
[Thu Sep 29 23:23:11 2011] Spatial fit model total counts = 31.384300, observed total counts = 30.000000
[Thu Sep 29 23:23:11 2011] Offset between fit and detection position for source 36 = 0.960444 pixels
[Thu Sep 29 23:23:11 2011] 31.752600 total counts/ 14.582100 bgd. counts: snr = 4.496482
Spatial fit parameters:
  Offset between fit and detection position for source 36 = 0.960444 pixels
  Position = (263.4, 856.0) = 18 30 8.67 69 14 57.0
  Extent = 1.7 (1.2-2.6)", rotation angle = 0
  Source counts = 17.2 +/- 5.6
  Background counts = 14.6
  Rate = 0.0005 +/- 0.0002
[Thu Sep 29 23:23:11 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 23:23:11 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 23:23:11 2011] Assessing source extent using major axis lower bound
[Thu Sep 29 23:23:11 2011] Source does appear to be extended
[Thu Sep 29 23:23:11 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 23:23:30 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Sep 29 23:23:30 2011] Initial guess for spatial extent in simple fitting = 1.75"
[Thu Sep 29 23:23:30 2011] source mask rpix=3.6, npix_max = 65, mask sum = 64, frac = 0.975
[Thu Sep 29 23:23:30 2011] Giving source the simple spatial ID 13 for pass 1, mean size = 1.75"
[Thu Sep 29 23:23:31 2011] fullrun_ccd3_acisf10412_pi14-548_cl_pass1_src13.ximg exists
[Thu Sep 29 23:23:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10412_pi14-548_cl_pass1_src13.csv
[Thu Sep 29 23:23:31 2011] fullrun_ccd3_acisf10412_pi14-548_cl_pass1_src13_1.ximg exists
[Thu Sep 29 23:23:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10412_pi14-548_cl_pass1_src13.csv
[Thu Sep 29 23:23:31 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10412_pi14-548_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10412_pi14-548_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 23:23:31 2011] fullrun_ccd3_acisf10412_pi14-548_cl_pass1_tfrozen_src13.ximg exists
[Thu Sep 29 23:23:31 2011] fullrun_ccd3_acisf10412_pi14-548_cl_pass1_tfrozen_src13_1.ximg exists
[Thu Sep 29 23:23:31 2011] Fit fullrun_ccd3_acisf10412_pi14-548_cl_pass1_tfrozen_src13 appears to have run properly
[Thu Sep 29 23:23:42 2011] Spatial fit model total counts = 23.506100, observed total counts = 23.000000
[Thu Sep 29 23:23:42 2011] Offset between fit and detection position for source 36 = 0.663610 pixels
[Thu Sep 29 23:23:42 2011] 23.515960 total counts/ 7.575660 bgd. counts: snr = 5.791436
Spatial fit parameters:
  Offset between fit and detection position for source 36 = 0.663610 pixels
  Position = (263.6, 855.4) = 18 30 8.65 69 14 56.7
  Extent = 1.6 (1.1-2.6)", rotation angle = 0
  Source counts = 15.9 +/- 4.8
  Background counts = 7.6
  Rate = 0.0005 +/- 0.0001
[Thu Sep 29 23:23:42 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 23:23:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 23:23:42 2011] Assessing source extent using major axis lower bound
[Thu Sep 29 23:23:42 2011] Source does appear to be extended
[Thu Sep 29 23:23:42 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 23:26:58 2011] Not overwriting source region fullrun_ccd3_acisf10412_pi14-548_pass1_cl_src36_src.reg
[Thu Sep 29 23:26:58 2011] Extracting stamp from image fullrun_ccd3_acisf10412_pi14-548_cl_sm2.00.img.gz, (191, 783) - (336, 928)
[Thu Sep 29 23:26:58 2011] Writing fullrun_ccd3_acisf10412_pi14-548_pass1_cl_src36.gif
[Thu Sep 29 23:27:39 2011] ../../acisf10412/products/events/fullrun_ccd3_acisf10412_pi14-548_pass1_cl_src36_src.evt and ../../acisf10412/products/events/fullrun_ccd3_acisf10412_pi14-548_pass1_cl_src36_bgd.evt exist, delete to re-create
[Thu Sep 29 23:27:39 2011] Size of ../../acisf10412/products/events/fullrun_ccd3_acisf10412_pi14-548_pass1_cl_src36_src.evt.gz[events] = 22 counts
[Thu Sep 29 23:27:39 2011] Mean chipx,y = (504.36, 65.50)
[Thu Sep 29 23:27:39 2011] Mean tdetx,y = (5066.50, 3565.36)
[Thu Sep 29 23:27:39 2011] chipx,y range = (487.00-529.00, 50.00-88.00)
[Thu Sep 29 23:27:39 2011] Size of ../../acisf10412/products/events/fullrun_ccd3_acisf10412_pi14-548_pass1_cl_src36_bgd.evt.gz[events] = 48 counts
[Thu Sep 29 23:27:39 2011] ../../acisf10412/products/images/fullrun_ccd3_acisf10412_pi14-548_pass1_cl_src36_src.img and ../../acisf10412/products/images/fullrun_ccd3_acisf10412_pi14-548_pass1_cl_src36_bgd.img exist, delete to re-create
[Thu Sep 29 23:27:39 2011] ../../acisf10412/products/spectra/fullrun_ccd3_acisf10412_pi14-548_pass1_cl_src36_src.pi and ../../acisf10412/products/spectra/fullrun_ccd3_acisf10412_pi14-548_pass1_cl_src36_bgd.pi exist, delete to re-create
[Thu Sep 29 23:27:39 2011] Not generating rmf since there are only 15 counts
[Thu Sep 29 23:27:43 2011] ../../acisf10412/products/lightcurves/fullrun_ccd3_acisf10412_pi14-548_pass1_cl_src36_src.lc and ../../acisf10412/products/lightcurves/fullrun_ccd3_acisf10412_pi14-548_pass1_cl_src36_bgd.lc exist, delete to re-create
[Thu Sep 29 23:28:15 2011] 162.832
[Thu Sep 29 23:28:25 2011] Updating aperture counts using extracted products
[Thu Sep 29 23:28:25 2011] Error reading totcts from fullrun_ccd3_acisf10412_pi14-548_pass1_cl_src36_src.pi.gz
[Thu Sep 29 23:28:25 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 29 23:28:25 2011] Using photon index=1.80, rate=0.000461, arf fullrun_ccd3_acisf10412_pi14-548_pass1_cl_src36.arf
[Thu Sep 29 23:28:25 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Sep 29 23:28:25 2011] Updating source flux to 6.6e-15
[Thu Sep 29 23:28:34 2011] Source 36 has fewer than 100.000000 counts, skipping spectral fitting