[Thu Sep 29 23:22:08 2011] Detection parameters:
  Position = (949.6, 922.1) = 18 29 5.11 69 15 31.0
  Extent = 0.5" x 0.5", rotation angle = 42 degrees
  Source counts = 60.3 +/- 7.9
  Background counts = 1.7
  Rate = 0.002 +/- 0.0002

[Thu Sep 29 23:22:10 2011] Off-axis axis estimate = 3.08'
[Thu Sep 29 23:22:58 2011] Using EEF radius (= 0.60 ")to estimate initial spatial extent for simple fitting
[Thu Sep 29 23:22:58 2011] Initial guess for spatial extent in simple fitting = 0.60"
[Thu Sep 29 23:22:58 2011] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.025
[Thu Sep 29 23:22:58 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 0.60"
[Thu Sep 29 23:22:58 2011] fullrun_ccd3_acisf10412_pi14-548_cl_pass0_src5.ximg exists
[Thu Sep 29 23:22:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10412_pi14-548_cl_pass0_src5.csv
[Thu Sep 29 23:22:58 2011] fullrun_ccd3_acisf10412_pi14-548_cl_pass0_src5_1.ximg exists
[Thu Sep 29 23:22:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10412_pi14-548_cl_pass0_src5.csv
[Thu Sep 29 23:22:58 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10412_pi14-548_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10412_pi14-548_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 23:22:59 2011] fullrun_ccd3_acisf10412_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Thu Sep 29 23:22:59 2011] fullrun_ccd3_acisf10412_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Thu Sep 29 23:22:59 2011] Fit fullrun_ccd3_acisf10412_pi14-548_cl_pass0_tfrozen_src5 appears to have run properly
[Thu Sep 29 23:23:11 2011] Spatial fit model total counts = 63.359100, observed total counts = 65.000000
[Thu Sep 29 23:23:11 2011] Offset between fit and detection position for source 18 = 0.731175 pixels
[Thu Sep 29 23:23:11 2011] 63.009690 total counts/ 1.243890 bgd. counts: snr = 55.380527
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.731175 pixels
  Position = (950.1, 922.6) = 18 29 5.10 69 15 31.0
  Extent = 0.6 (0.5-0.6)", rotation angle = 0
  Source counts = 61.8 +/- 7.9
  Background counts = 1.2
  Rate = 0.002 +/- 0.0002
[Thu Sep 29 23:23:11 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 23:23:11 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 23:23:11 2011] Assessing source extent using major axis lower bound
[Thu Sep 29 23:23:11 2011] Source does appear to be extended
[Thu Sep 29 23:23:11 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 23:23:30 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Sep 29 23:23:30 2011] Initial guess for spatial extent in simple fitting = 0.56"
[Thu Sep 29 23:23:30 2011] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.114
[Thu Sep 29 23:23:30 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 0.56"
[Thu Sep 29 23:23:31 2011] fullrun_ccd3_acisf10412_pi14-548_cl_pass1_src5.ximg exists
[Thu Sep 29 23:23:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10412_pi14-548_cl_pass1_src5.csv
[Thu Sep 29 23:23:31 2011] fullrun_ccd3_acisf10412_pi14-548_cl_pass1_src5_1.ximg exists
[Thu Sep 29 23:23:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10412_pi14-548_cl_pass1_src5.csv
[Thu Sep 29 23:23:31 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10412_pi14-548_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10412_pi14-548_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 23:23:31 2011] fullrun_ccd3_acisf10412_pi14-548_cl_pass1_tfrozen_src5.ximg exists
[Thu Sep 29 23:23:31 2011] fullrun_ccd3_acisf10412_pi14-548_cl_pass1_tfrozen_src5_1.ximg exists
[Thu Sep 29 23:23:31 2011] Fit fullrun_ccd3_acisf10412_pi14-548_cl_pass1_tfrozen_src5 appears to have run properly
[Thu Sep 29 23:23:42 2011] Spatial fit model total counts = 63.154600, observed total counts = 64.000000
[Thu Sep 29 23:23:42 2011] Offset between fit and detection position for source 18 = 0.029070 pixels
[Thu Sep 29 23:23:42 2011] 63.714990 total counts/ 2.134090 bgd. counts: snr = 42.154085
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.029070 pixels
  Position = (950.1, 922.6) = 18 29 5.10 69 15 31.0
  Extent = 0.6 (0.5-0.6)", rotation angle = 0
  Source counts = 61.6 +/- 8.0
  Background counts = 2.1
  Rate = 0.002 +/- 0.0002
[Thu Sep 29 23:23:42 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 23:23:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 23:23:42 2011] Assessing source extent using major axis lower bound
[Thu Sep 29 23:23:42 2011] Source does appear to be extended
[Thu Sep 29 23:23:42 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 23:26:58 2011] Not overwriting source region fullrun_ccd3_acisf10412_pi14-548_pass1_cl_src18_src.reg
[Thu Sep 29 23:26:58 2011] Extracting stamp from image fullrun_ccd3_acisf10412_pi14-548_cl_sm2.00.img.gz, (924, 897) - (976, 948)
[Thu Sep 29 23:26:58 2011] Writing fullrun_ccd3_acisf10412_pi14-548_pass1_cl_src18.gif
[Thu Sep 29 23:27:12 2011] ../../acisf10412/products/events/fullrun_ccd3_acisf10412_pi14-548_pass1_cl_src18_src.evt and ../../acisf10412/products/events/fullrun_ccd3_acisf10412_pi14-548_pass1_cl_src18_bgd.evt exist, delete to re-create
[Thu Sep 29 23:27:12 2011] Size of ../../acisf10412/products/events/fullrun_ccd3_acisf10412_pi14-548_pass1_cl_src18_src.evt.gz[events] = 62 counts
[Thu Sep 29 23:27:12 2011] Mean chipx,y = (848.84, 668.69)
[Thu Sep 29 23:27:12 2011] Mean tdetx,y = (4463.31, 3909.84)
[Thu Sep 29 23:27:12 2011] chipx,y range = (829.00-867.00, 652.00-686.00)
[Thu Sep 29 23:27:12 2011] Size of ../../acisf10412/products/events/fullrun_ccd3_acisf10412_pi14-548_pass1_cl_src18_bgd.evt.gz[events] = 11 counts
[Thu Sep 29 23:27:12 2011] ../../acisf10412/products/images/fullrun_ccd3_acisf10412_pi14-548_pass1_cl_src18_src.img and ../../acisf10412/products/images/fullrun_ccd3_acisf10412_pi14-548_pass1_cl_src18_bgd.img exist, delete to re-create
[Thu Sep 29 23:27:12 2011] ../../acisf10412/products/spectra/fullrun_ccd3_acisf10412_pi14-548_pass1_cl_src18_src.pi and ../../acisf10412/products/spectra/fullrun_ccd3_acisf10412_pi14-548_pass1_cl_src18_bgd.pi exist, delete to re-create
[Thu Sep 29 23:27:12 2011] Not generating rmf since there are only 61 counts
[Thu Sep 29 23:27:15 2011] ../../acisf10412/products/lightcurves/fullrun_ccd3_acisf10412_pi14-548_pass1_cl_src18_src.lc and ../../acisf10412/products/lightcurves/fullrun_ccd3_acisf10412_pi14-548_pass1_cl_src18_bgd.lc exist, delete to re-create
[Thu Sep 29 23:28:14 2011] 199.581
[Thu Sep 29 23:28:24 2011] Updating aperture counts using extracted products
[Thu Sep 29 23:28:24 2011] Error reading totcts from fullrun_ccd3_acisf10412_pi14-548_pass1_cl_src18_src.pi.gz
[Thu Sep 29 23:28:25 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 29 23:28:25 2011] Using photon index=1.80, rate=0.00178, arf fullrun_ccd3_acisf10412_pi14-548_pass1_cl_src18.arf
[Thu Sep 29 23:28:25 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Sep 29 23:28:25 2011] Updating source flux to 2e-14
[Thu Sep 29 23:28:34 2011] Source 18 has fewer than 100.000000 counts, skipping spectral fitting