[Thu Sep 29 23:22:06 2011] Detection parameters:
  Position = (360.6, 1177.5) = 18 28 32.33 69 14 6.7
  Extent = 0.5" x 0.5", rotation angle = 84 degrees
  Source counts = 21.1 +/- 4.7
  Background counts = 0.9
  Rate = 0.0006 +/- 0.0001

[Thu Sep 29 23:22:07 2011] Off-axis axis estimate = 1.15'
[Thu Sep 29 23:22:56 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Thu Sep 29 23:22:56 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Thu Sep 29 23:22:56 2011] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.385
[Thu Sep 29 23:22:56 2011] Giving source the simple spatial ID 11 for pass 0, mean size = 0.38"
[Thu Sep 29 23:22:57 2011] fullrun_ccd2_acisf10412_pi14-548_cl_pass0_src11.ximg exists
[Thu Sep 29 23:22:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10412_pi14-548_cl_pass0_src11.csv
[Thu Sep 29 23:22:57 2011] fullrun_ccd2_acisf10412_pi14-548_cl_pass0_src11_1.ximg exists
[Thu Sep 29 23:22:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10412_pi14-548_cl_pass0_src11.csv
[Thu Sep 29 23:22:57 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10412_pi14-548_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10412_pi14-548_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 23:22:58 2011] fullrun_ccd2_acisf10412_pi14-548_cl_pass0_tfrozen_src11.ximg exists
[Thu Sep 29 23:22:58 2011] fullrun_ccd2_acisf10412_pi14-548_cl_pass0_tfrozen_src11_1.ximg exists
[Thu Sep 29 23:22:58 2011] Fit fullrun_ccd2_acisf10412_pi14-548_cl_pass0_tfrozen_src11 appears to have run properly
[Thu Sep 29 23:23:08 2011] Spatial fit model total counts = 25.158100, observed total counts = 25.000000
[Thu Sep 29 23:23:08 2011] Offset between fit and detection position for source 18 = 0.784750 pixels
[Thu Sep 29 23:23:08 2011] 25.282450 total counts/ 4.646850 bgd. counts: snr = 9.572773
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.784750 pixels
  Position = (361.0, 1178.2) = 18 28 32.34 69 14 6.8
  Extent = 0.5 (0.4-0.7)", rotation angle = 0
  Source counts = 20.6 +/- 5.0
  Background counts = 4.6
  Rate = 0.0006 +/- 0.0001
[Thu Sep 29 23:23:08 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 23:23:08 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 23:23:08 2011] Assessing source extent using major axis lower bound
[Thu Sep 29 23:23:08 2011] Source does appear to be extended
[Thu Sep 29 23:23:08 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 23:23:29 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Sep 29 23:23:29 2011] Initial guess for spatial extent in simple fitting = 0.51"
[Thu Sep 29 23:23:29 2011] source mask rpix=1.0, npix_max = 9, mask sum = 12, frac = 1.274
[Thu Sep 29 23:23:29 2011] Giving source the simple spatial ID 11 for pass 1, mean size = 0.51"
[Thu Sep 29 23:23:29 2011] fullrun_ccd2_acisf10412_pi14-548_cl_pass1_src11.ximg exists
[Thu Sep 29 23:23:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10412_pi14-548_cl_pass1_src11.csv
[Thu Sep 29 23:23:29 2011] fullrun_ccd2_acisf10412_pi14-548_cl_pass1_src11_1.ximg exists
[Thu Sep 29 23:23:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10412_pi14-548_cl_pass1_src11.csv
[Thu Sep 29 23:23:29 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10412_pi14-548_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10412_pi14-548_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 23:23:30 2011] fullrun_ccd2_acisf10412_pi14-548_cl_pass1_tfrozen_src11.ximg exists
[Thu Sep 29 23:23:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10412_pi14-548_cl_pass1_tfrozen_src11.csv
[Thu Sep 29 23:23:30 2011] fullrun_ccd2_acisf10412_pi14-548_cl_pass1_tfrozen_src11_1.ximg exists
[Thu Sep 29 23:23:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10412_pi14-548_cl_pass1_tfrozen_src11.csv
[Thu Sep 29 23:23:30 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10412_pi14-548_cl_pass1_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10412_pi14-548_cl_pass1_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 23:23:39 2011] Spatial fit model total counts = 19.066800, observed total counts = 25.000000
[Thu Sep 29 23:23:39 2011] Poor agreement between spatial fit and data for source 18
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Sep 29 23:23:39 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 23:23:39 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 23:23:39 2011] Assessing source extent using major axis lower bound
[Thu Sep 29 23:23:39 2011] Source does appear to be extended
[Thu Sep 29 23:23:39 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 23:25:03 2011] Not overwriting source region fullrun_ccd2_acisf10412_pi14-548_pass1_cl_src18_src.reg
[Thu Sep 29 23:25:03 2011] Extracting stamp from image fullrun_ccd2_acisf10412_pi14-548_cl_sm2.00.img.gz, (338, 1155) - (384, 1201)
[Thu Sep 29 23:25:03 2011] Writing fullrun_ccd2_acisf10412_pi14-548_pass1_cl_src18.gif
[Thu Sep 29 23:25:35 2011] ../../acisf10412/products/events/fullrun_ccd2_acisf10412_pi14-548_pass1_cl_src18_src.evt and ../../acisf10412/products/events/fullrun_ccd2_acisf10412_pi14-548_pass1_cl_src18_bgd.evt exist, delete to re-create
[Thu Sep 29 23:25:35 2011] Size of ../../acisf10412/products/events/fullrun_ccd2_acisf10412_pi14-548_pass1_cl_src18_src.evt.gz[events] = 21 counts
[Thu Sep 29 23:25:35 2011] Mean chipx,y = (186.05, 1006.48)
[Thu Sep 29 23:25:35 2011] Mean tdetx,y = (4067.48, 3899.95)
[Thu Sep 29 23:25:35 2011] chipx,y range = (172.00-207.00, 990.00-1022.00)
[Thu Sep 29 23:25:35 2011] Size of ../../acisf10412/products/events/fullrun_ccd2_acisf10412_pi14-548_pass1_cl_src18_bgd.evt.gz[events] = 11 counts
[Thu Sep 29 23:25:35 2011] ../../acisf10412/products/images/fullrun_ccd2_acisf10412_pi14-548_pass1_cl_src18_src.img and ../../acisf10412/products/images/fullrun_ccd2_acisf10412_pi14-548_pass1_cl_src18_bgd.img exist, delete to re-create
[Thu Sep 29 23:25:35 2011] ../../acisf10412/products/spectra/fullrun_ccd2_acisf10412_pi14-548_pass1_cl_src18_src.pi and ../../acisf10412/products/spectra/fullrun_ccd2_acisf10412_pi14-548_pass1_cl_src18_bgd.pi exist, delete to re-create
[Thu Sep 29 23:25:35 2011] Not generating rmf since there are only 20 counts
[Thu Sep 29 23:25:38 2011] ../../acisf10412/products/lightcurves/fullrun_ccd2_acisf10412_pi14-548_pass1_cl_src18_src.lc and ../../acisf10412/products/lightcurves/fullrun_ccd2_acisf10412_pi14-548_pass1_cl_src18_bgd.lc exist, delete to re-create
[Thu Sep 29 23:26:57 2011] 178.287
[Thu Sep 29 23:28:24 2011] Updating aperture counts using extracted products
[Thu Sep 29 23:28:24 2011] Error reading totcts from fullrun_ccd2_acisf10412_pi14-548_pass1_cl_src18_src.pi.gz
[Thu Sep 29 23:28:24 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 29 23:28:24 2011] Using photon index=1.80, rate=0.000597, arf fullrun_ccd2_acisf10412_pi14-548_pass1_cl_src18.arf
[Thu Sep 29 23:28:24 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Sep 29 23:28:24 2011] Updating source flux to 7.6e-15
[Thu Sep 29 23:28:33 2011] Flag p found in src. 18 procflags, skipping spectral fitting
[Thu Sep 29 23:28:33 2011] Source 18 has fewer than 100.000000 counts, skipping spectral fitting
[Thu Sep 29 23:28:34 2011] acisf10412/analysis//spectral/fullrun_ccd2_acisf10412_pi14-548_pass1_cl_src18_pl.csv not found, spectral fit skipped or did not complete