[Sat Oct  1 18:22:23 2011] Detection parameters:
  Position = (987.5, 335.5) = 17 34 52.21 64 2 49.8
  Extent = 0.6" x 0.5", rotation angle = 63 degrees
  Source counts = 119.4 +/- 11.0
  Background counts = 2.6
  Rate = 0.003 +/- 0.0003

[Sat Oct  1 18:22:24 2011] Off-axis axis estimate = 2.64'
[Sat Oct  1 18:23:32 2011] Using EEF radius (= 0.51 ")to estimate initial spatial extent for simple fitting
[Sat Oct  1 18:23:32 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct  1 18:23:32 2011] Initial guess for spatial extent in simple fitting = 0.51"
[Sat Oct  1 18:23:32 2011] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.943
[Sat Oct  1 18:23:32 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.51"
[Sat Oct  1 18:23:32 2011] fullrun_ccd3_acisf10411_pi14-548_cl_pass0_src1.ximg exists
[Sat Oct  1 18:23:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10411_pi14-548_cl_pass0_src1.csv
[Sat Oct  1 18:23:32 2011] fullrun_ccd3_acisf10411_pi14-548_cl_pass0_src1_1.ximg exists
[Sat Oct  1 18:23:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10411_pi14-548_cl_pass0_src1.csv
[Sat Oct  1 18:23:32 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10411_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10411_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  1 18:23:33 2011] fullrun_ccd3_acisf10411_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sat Oct  1 18:23:33 2011] fullrun_ccd3_acisf10411_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Oct  1 18:23:33 2011] Fit fullrun_ccd3_acisf10411_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Oct  1 18:23:43 2011] Spatial fit model total counts = 123.388000, observed total counts = 124.000000
[Sat Oct  1 18:23:43 2011] Offset between fit and detection position for source 18 = 0.732965 pixels
[Sat Oct  1 18:23:43 2011] 123.428010 total counts/ 8.672010 bgd. counts: snr = 38.968664
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.732965 pixels
  Position = (988.1, 335.9) = 17 34 52.21 64 2 49.8
  Extent = 0.6 (0.5-0.6)", rotation angle = 0
  Source counts = 114.8 +/- 11.1
  Background counts = 8.7
  Rate = 0.003 +/- 0.0003
[Sat Oct  1 18:23:43 2011] Vigneting correction estimate = 1.000000
[Sat Oct  1 18:23:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct  1 18:23:43 2011] Assessing source extent using major axis lower bound
[Sat Oct  1 18:23:43 2011] Source does appear to be extended
[Sat Oct  1 18:23:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct  1 18:24:06 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct  1 18:24:06 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct  1 18:24:06 2011] Initial guess for spatial extent in simple fitting = 0.57"
[Sat Oct  1 18:24:06 2011] source mask rpix=1.2, npix_max = 11, mask sum = 16, frac = 1.445
[Sat Oct  1 18:24:06 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.57"
[Sat Oct  1 18:24:07 2011] fullrun_ccd3_acisf10411_pi14-548_cl_pass1_src1.ximg exists
[Sat Oct  1 18:24:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10411_pi14-548_cl_pass1_src1.csv
[Sat Oct  1 18:24:07 2011] fullrun_ccd3_acisf10411_pi14-548_cl_pass1_src1_1.ximg exists
[Sat Oct  1 18:24:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10411_pi14-548_cl_pass1_src1.csv
[Sat Oct  1 18:24:07 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10411_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10411_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  1 18:24:07 2011] fullrun_ccd3_acisf10411_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sat Oct  1 18:24:07 2011] fullrun_ccd3_acisf10411_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Oct  1 18:24:07 2011] Fit fullrun_ccd3_acisf10411_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Oct  1 18:24:25 2011] Spatial fit model total counts = 123.799000, observed total counts = 124.000000
[Sat Oct  1 18:24:25 2011] Offset between fit and detection position for source 18 = 0.026987 pixels
[Sat Oct  1 18:24:25 2011] 123.105750 total counts/ 8.519750 bgd. counts: snr = 39.257093
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.026987 pixels
  Position = (988.1, 336.0) = 17 34 52.20 64 2 49.8
  Extent = 0.6 (0.5-0.6)", rotation angle = 0
  Source counts = 114.6 +/- 11.1
  Background counts = 8.5
  Rate = 0.003 +/- 0.0003
[Sat Oct  1 18:24:25 2011] Vigneting correction estimate = 1.000000
[Sat Oct  1 18:24:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct  1 18:24:25 2011] Assessing source extent using major axis lower bound
[Sat Oct  1 18:24:25 2011] Source does appear to be extended
[Sat Oct  1 18:24:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct  1 18:28:25 2011] Not overwriting source region fullrun_ccd3_acisf10411_pi14-548_pass1_cl_src18_src.reg
[Sat Oct  1 18:28:25 2011] Extracting stamp from image fullrun_ccd3_acisf10411_pi14-548_cl_sm2.00.img.gz, (962, 310) - (1014, 362)
[Sat Oct  1 18:28:25 2011] Writing fullrun_ccd3_acisf10411_pi14-548_pass1_cl_src18.gif
[Sat Oct  1 18:28:26 2011] ../../acisf10411/products/events/fullrun_ccd3_acisf10411_pi14-548_pass1_cl_src18_src.evt and ../../acisf10411/products/events/fullrun_ccd3_acisf10411_pi14-548_pass1_cl_src18_bgd.evt exist, delete to re-create
[Sat Oct  1 18:28:26 2011] Size of ../../acisf10411/products/events/fullrun_ccd3_acisf10411_pi14-548_pass1_cl_src18_src.evt.gz[events] = 118 counts
[Sat Oct  1 18:28:26 2011] Mean chipx,y = (327.86, 944.40)
[Sat Oct  1 18:28:26 2011] Mean tdetx,y = (4187.60, 3388.86)
[Sat Oct  1 18:28:26 2011] chipx,y range = (309.00-346.00, 928.00-963.00)
[Sat Oct  1 18:28:26 2011] Size of ../../acisf10411/products/events/fullrun_ccd3_acisf10411_pi14-548_pass1_cl_src18_bgd.evt.gz[events] = 16 counts
[Sat Oct  1 18:28:26 2011] ../../acisf10411/products/images/fullrun_ccd3_acisf10411_pi14-548_pass1_cl_src18_src.img and ../../acisf10411/products/images/fullrun_ccd3_acisf10411_pi14-548_pass1_cl_src18_bgd.img exist, delete to re-create
[Sat Oct  1 18:28:26 2011] ../../acisf10411/products/spectra/fullrun_ccd3_acisf10411_pi14-548_pass1_cl_src18_src.pi and ../../acisf10411/products/spectra/fullrun_ccd3_acisf10411_pi14-548_pass1_cl_src18_bgd.pi exist, delete to re-create
[Sat Oct  1 18:28:29 2011] ../../acisf10411/products/lightcurves/fullrun_ccd3_acisf10411_pi14-548_pass1_cl_src18_src.lc and ../../acisf10411/products/lightcurves/fullrun_ccd3_acisf10411_pi14-548_pass1_cl_src18_bgd.lc exist, delete to re-create
[Sat Oct  1 18:29:07 2011] Keeping rmf generated by specextract
[Sat Oct  1 18:29:07 2011] 192.309
[Sat Oct  1 18:29:19 2011] Updating aperture counts using extracted products
[Sat Oct  1 18:29:19 2011] Error reading totcts from fullrun_ccd3_acisf10411_pi14-548_pass1_cl_src18_src.pi.gz
[Sat Oct  1 18:29:19 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct  1 18:29:19 2011] Using photon index=1.80, rate=0.0029, arf fullrun_ccd3_acisf10411_pi14-548_pass1_cl_src18.arf
[Sat Oct  1 18:29:19 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct  1 18:29:19 2011] Updating source flux to 3.6e-14
[Sat Oct  1 18:29:40 2011] Reading fit data from acisf10411/analysis//spectral/fullrun_ccd3_acisf10411_pi14-548_pass1_cl_src18_pl.csv
[Sat Oct  1 18:29:40 2011] Spectral fit parameter nH value = 3.37865e+21
[Sat Oct  1 18:29:40 2011] Spectral fit parameter PhoIndex value = 2.01767
[Sat Oct  1 18:29:40 2011] Failed to get F(0.3-8.0) from acisf10411/analysis//spectral/fullrun_ccd3_acisf10411_pi14-548_pass1_cl_src18_pl.csv, possibly due to different flux energy range selected
[Sat Oct  1 18:29:40 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct  1 18:29:40 2011] Using Nh = 3.4e+21, photon index=2.02, rate=0.0029, arf fullrun_ccd3_acisf10411_pi14-548_pass1_cl_src18.arf
[Sat Oct  1 18:29:40 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct  1 18:29:40 2011] Updating source flux to 3.3e-14