[Sat Oct 1 18:22:16 2011] Detection parameters: Position = (520.4, 694.4) = 17 33 43.86 64 9 56.8 Extent = 0.5" x 0.5", rotation angle = 122 degrees Source counts = 40.5 +/- 6.9 Background counts = 7.5 Rate = 0.001 +/- 0.0002 [Sat Oct 1 18:22:17 2011] Off-axis axis estimate = 7.70' [Sat Oct 1 18:23:25 2011] Using EEF radius (= 2.62 ")to estimate initial spatial extent for simple fitting [Sat Oct 1 18:23:25 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Sat Oct 1 18:23:25 2011] Initial guess for spatial extent in simple fitting = 2.62" [Sat Oct 1 18:23:25 2011] source mask rpix=5.3, npix_max = 135, mask sum = 120, frac = 0.883 [Sat Oct 1 18:23:25 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 2.62" [Sat Oct 1 18:23:26 2011] fullrun_ccd0_acisf10411_pi14-548_cl_pass0_src2.ximg exists [Sat Oct 1 18:23:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10411_pi14-548_cl_pass0_src2.csv [Sat Oct 1 18:23:26 2011] fullrun_ccd0_acisf10411_pi14-548_cl_pass0_src2_1.ximg exists [Sat Oct 1 18:23:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10411_pi14-548_cl_pass0_src2.csv [Sat Oct 1 18:23:26 2011] It looks like the fit did not converge You should probably delete fullrun_ccd0_acisf10411_pi14-548_cl_pass0_src2_1.ximg Either tweak this fit manually starting from fullrun_ccd0_acisf10411_pi14-548_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Oct 1 18:23:29 2011] fullrun_ccd0_acisf10411_pi14-548_cl_pass0_tfrozen_src2.ximg exists [Sat Oct 1 18:23:29 2011] fullrun_ccd0_acisf10411_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists [Sat Oct 1 18:23:29 2011] Fit fullrun_ccd0_acisf10411_pi14-548_cl_pass0_tfrozen_src2 appears to have run properly [Sat Oct 1 18:23:39 2011] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 30.260812 pixels away [Sat Oct 1 18:23:39 2011] Vigneting correction estimate = 1.000000 [Sat Oct 1 18:23:39 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Oct 1 18:23:39 2011] Assessing source extent using major [Sat Oct 1 18:23:39 2011] Source does appear to be extended [Sat Oct 1 18:23:39 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Oct 1 18:24:02 2011] Using EEF radius (= 2.62 ")to estimate initial spatial extent for simple fitting [Sat Oct 1 18:24:02 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Sat Oct 1 18:24:02 2011] Initial guess for spatial extent in simple fitting = 2.62" [Sat Oct 1 18:24:02 2011] source mask rpix=5.3, npix_max = 135, mask sum = 120, frac = 0.883 [Sat Oct 1 18:24:02 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 2.62" [Sat Oct 1 18:24:03 2011] fullrun_ccd0_acisf10411_pi14-548_cl_pass1_src2.ximg exists [Sat Oct 1 18:24:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10411_pi14-548_cl_pass1_src2.csv [Sat Oct 1 18:24:03 2011] fullrun_ccd0_acisf10411_pi14-548_cl_pass1_src2_1.ximg exists [Sat Oct 1 18:24:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10411_pi14-548_cl_pass1_src2.csv [Sat Oct 1 18:24:03 2011] It looks like the fit did not converge You should probably delete fullrun_ccd0_acisf10411_pi14-548_cl_pass1_src2_1.ximg Either tweak this fit manually starting from fullrun_ccd0_acisf10411_pi14-548_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Oct 1 18:24:04 2011] fullrun_ccd0_acisf10411_pi14-548_cl_pass1_tfrozen_src2.ximg exists [Sat Oct 1 18:24:04 2011] fullrun_ccd0_acisf10411_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists [Sat Oct 1 18:24:04 2011] Fit fullrun_ccd0_acisf10411_pi14-548_cl_pass1_tfrozen_src2 appears to have run properly [Sat Oct 1 18:24:16 2011] Spatial fit model total counts = 120.818000, observed total counts = 126.000000 [Sat Oct 1 18:24:16 2011] Offset between fit and detection position for source 2 = 5.362861 pixels [Sat Oct 1 18:24:16 2011] Warning, changing simple spatial fit ID from 2 to 1 [Sat Oct 1 18:24:16 2011] 120.754700 total counts/ 14.938700 bgd. counts: snr = 27.377572 Spatial fit parameters: Offset between fit and detection position for source 2 = 5.362861 pixels Position = (516.5, 690.8) = 17 33 44.20 64 9 54.8 Extent = 2.8 (2.5-3.4)", rotation angle = 0 Source counts = 105.8 +/- 11.0 Background counts = 14.9 Rate = 0.003 +/- 0.0003 [Sat Oct 1 18:24:16 2011] Vigneting correction estimate = 1.000000 [Sat Oct 1 18:24:16 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Oct 1 18:24:16 2011] Assessing source extent using major axis lower bound [Sat Oct 1 18:24:16 2011] Source does appear to be extended [Sat Oct 1 18:24:16 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Oct 1 18:24:16 2011] Source is confused with source 1 [Sat Oct 1 18:24:57 2011] Not overwriting source region fullrun_ccd0_acisf10411_pi14-548_pass1_cl_src2_src.reg [Sat Oct 1 18:24:57 2011] Extracting stamp from image fullrun_ccd0_acisf10411_pi14-548_cl_sm2.00.img.gz, (386, 561) - (647, 821) [Sat Oct 1 18:24:57 2011] Writing fullrun_ccd0_acisf10411_pi14-548_pass1_cl_src2.gif [Sat Oct 1 18:25:11 2011] ../../acisf10411/products/events/fullrun_ccd0_acisf10411_pi14-548_pass1_cl_src2_src.evt and ../../acisf10411/products/events/fullrun_ccd0_acisf10411_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create [Sat Oct 1 18:25:11 2011] Size of ../../acisf10411/products/events/fullrun_ccd0_acisf10411_pi14-548_pass1_cl_src2_src.evt.gz[events] = 127 counts [Sat Oct 1 18:25:11 2011] Mean chipx,y = (575.80, 659.65) [Sat Oct 1 18:25:11 2011] Mean tdetx,y = (3720.65, 4556.20) [Sat Oct 1 18:25:11 2011] chipx,y range = (550.00-603.00, 638.00-695.00) [Sat Oct 1 18:25:12 2011] Size of ../../acisf10411/products/events/fullrun_ccd0_acisf10411_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 266 counts [Sat Oct 1 18:25:12 2011] ../../acisf10411/products/images/fullrun_ccd0_acisf10411_pi14-548_pass1_cl_src2_src.img and ../../acisf10411/products/images/fullrun_ccd0_acisf10411_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create [Sat Oct 1 18:25:12 2011] ../../acisf10411/products/spectra/fullrun_ccd0_acisf10411_pi14-548_pass1_cl_src2_src.pi and ../../acisf10411/products/spectra/fullrun_ccd0_acisf10411_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create [Sat Oct 1 18:25:18 2011] ../../acisf10411/products/lightcurves/fullrun_ccd0_acisf10411_pi14-548_pass1_cl_src2_src.lc and ../../acisf10411/products/lightcurves/fullrun_ccd0_acisf10411_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create [Sat Oct 1 18:26:15 2011] Keeping rmf generated by specextract [Sat Oct 1 18:26:15 2011] 175.311 [Sat Oct 1 18:29:18 2011] Updating aperture counts using extracted products [Sat Oct 1 18:29:18 2011] Error reading totcts from fullrun_ccd0_acisf10411_pi14-548_pass1_cl_src2_src.pi.gz [Sat Oct 1 18:29:18 2011] Calculating source flux in energy range 0.30-8.00 [Sat Oct 1 18:29:18 2011] Using photon index=1.80, rate=0.00268, arf fullrun_ccd0_acisf10411_pi14-548_pass1_cl_src2.arf [Sat Oct 1 18:29:18 2011] Assuming count rate is from the 0.20-8.00 bandpass [Sat Oct 1 18:29:18 2011] Updating source flux to 3.5e-14 [Sat Oct 1 18:29:22 2011] Flag c found in src. 2 procflags, skipping spectral fitting [Sat Oct 1 18:29:31 2011] Reading fit data from acisf10411/analysis//spectral/fullrun_ccd0_acisf10411_pi14-548_pass1_cl_src2_pl.csv [Sat Oct 1 18:29:31 2011] Spectral fit parameter nH value = 1.81988e+23 [Sat Oct 1 18:29:31 2011] Spectral fit parameter PhoIndex value = 2.8898 [Sat Oct 1 18:29:31 2011] Failed to get F(0.3-8.0) from acisf10411/analysis//spectral/fullrun_ccd0_acisf10411_pi14-548_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected [Sat Oct 1 18:29:31 2011] Calculating source flux in energy range 0.30-8.00 [Sat Oct 1 18:29:31 2011] Using Nh = 1.8e+23, photon index=2.89, rate=0.00268, arf fullrun_ccd0_acisf10411_pi14-548_pass1_cl_src2.arf [Sat Oct 1 18:29:31 2011] Assuming count rate is from the 0.20-8.00 bandpass [Sat Oct 1 18:29:31 2011] Updating source flux to 8.7e-14