[Sat Oct  8 03:49:22 2011] Detection parameters:
  Position = (89.9, 244.8) = 5 26 20.72 -66 3 52.9
  Extent = 1.7" x 1.3", rotation angle = 12 degrees
  Source counts = 167.5 +/- 14.9
  Background counts = 54.5
  Rate = 0.005 +/- 0.0004

[Sat Oct  8 03:49:27 2011] Off-axis axis estimate = 7.32'
[Sat Oct  8 03:51:31 2011] Using EEF radius (= 2.38 ")to estimate initial spatial extent for simple fitting
[Sat Oct  8 03:51:31 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct  8 03:51:31 2011] Initial guess for spatial extent in simple fitting = 2.38"
[Sat Oct  8 03:51:31 2011] source mask rpix=4.8, npix_max = 113, mask sum = 110, frac = 0.966
[Sat Oct  8 03:51:31 2011] Giving source the simple spatial ID 68 for pass 0, mean size = 2.38"
[Sat Oct  8 03:51:34 2011] fullrun_ccd7_acisf01041_pi14-548_cl_pass0_src68.ximg exists
[Sat Oct  8 03:51:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01041_pi14-548_cl_pass0_src68.csv
[Sat Oct  8 03:51:34 2011] fullrun_ccd7_acisf01041_pi14-548_cl_pass0_src68_1.ximg exists
[Sat Oct  8 03:51:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01041_pi14-548_cl_pass0_src68.csv
[Sat Oct  8 03:51:34 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf01041_pi14-548_cl_pass0_src68_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf01041_pi14-548_cl_pass0_src68.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  8 03:51:39 2011] fullrun_ccd7_acisf01041_pi14-548_cl_pass0_tfrozen_src68.ximg exists
[Sat Oct  8 03:51:39 2011] fullrun_ccd7_acisf01041_pi14-548_cl_pass0_tfrozen_src68_1.ximg exists
[Sat Oct  8 03:51:39 2011] Fit fullrun_ccd7_acisf01041_pi14-548_cl_pass0_tfrozen_src68 appears to have run properly
[Sat Oct  8 03:52:06 2011] Spatial fit model total counts = 203.262000, observed total counts = 203.000000
[Sat Oct  8 03:52:06 2011] Offset between fit and detection position for source 78 = 1.237854 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 78 = 1.237854 pixels
  Position = (88.7, 245.3) = 5 26 20.85 -66 3 52.9
  Extent = 3.1 (2.6-3.4)", rotation angle = 0
  Source counts = 204.3 +/- 14.3
  Background counts = 0.0
  Rate = 0.007 +/- 0.0005
[Sat Oct  8 03:52:06 2011] Vigneting correction estimate = 1.000000
[Sat Oct  8 03:52:06 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct  8 03:52:06 2011] Assessing source extent using major axis lower bound
[Sat Oct  8 03:52:06 2011] Source does appear to be extended
[Sat Oct  8 03:52:06 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct  8 03:52:33 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct  8 03:52:33 2011] Initial guess for spatial extent in simple fitting = 3.07"
[Sat Oct  8 03:52:33 2011] source mask rpix=6.2, npix_max = 181, mask sum = 169, frac = 0.931
[Sat Oct  8 03:52:33 2011] Giving source the simple spatial ID 67 for pass 1, mean size = 3.07"
[Sat Oct  8 03:52:39 2011] fullrun_ccd7_acisf01041_pi14-548_cl_pass1_src67.ximg exists
[Sat Oct  8 03:52:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01041_pi14-548_cl_pass1_src67.csv
[Sat Oct  8 03:52:39 2011] fullrun_ccd7_acisf01041_pi14-548_cl_pass1_src67_1.ximg exists
[Sat Oct  8 03:52:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01041_pi14-548_cl_pass1_src67.csv
[Sat Oct  8 03:52:39 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf01041_pi14-548_cl_pass1_src67_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf01041_pi14-548_cl_pass1_src67.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  8 03:52:52 2011] fullrun_ccd7_acisf01041_pi14-548_cl_pass1_tfrozen_src67.ximg exists
[Sat Oct  8 03:52:52 2011] fullrun_ccd7_acisf01041_pi14-548_cl_pass1_tfrozen_src67_1.ximg exists
[Sat Oct  8 03:52:52 2011] Fit fullrun_ccd7_acisf01041_pi14-548_cl_pass1_tfrozen_src67 appears to have run properly
[Sat Oct  8 03:53:14 2011] Spatial fit model total counts = 226.999000, observed total counts = 227.000000
[Sat Oct  8 03:53:14 2011] Offset between fit and detection position for source 78 = 0.774646 pixels
[Sat Oct  8 03:53:14 2011] 227.226100 total counts/ 43.463100 bgd. counts: snr = 27.873899
Spatial fit parameters:
  Offset between fit and detection position for source 78 = 0.774646 pixels
  Position = (89.5, 245.4) = 5 26 20.79 -66 3 52.9
  Extent = 2.9 (2.5-3.3)", rotation angle = 0
  Source counts = 183.8 +/- 15.1
  Background counts = 43.5
  Rate = 0.006 +/- 0.0005
[Sat Oct  8 03:53:14 2011] Vigneting correction estimate = 1.000000
[Sat Oct  8 03:53:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct  8 03:53:14 2011] Assessing source extent using major axis lower bound
[Sat Oct  8 03:53:14 2011] Source does appear to be extended
[Sat Oct  8 03:53:14 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct  8 03:54:41 2011] Not overwriting source region fullrun_ccd7_acisf01041_pi14-548_pass1_cl_src78_src.reg
[Sat Oct  8 03:54:41 2011] Extracting stamp from image fullrun_ccd7_acisf01041_pi14-548_cl_sm2.00.img.gz, (0, 113) - (222, 377)
[Sat Oct  8 03:54:41 2011] Writing fullrun_ccd7_acisf01041_pi14-548_pass1_cl_src78.gif
[Sat Oct  8 03:59:11 2011] ../../acisf01041/products/events/fullrun_ccd7_acisf01041_pi14-548_pass1_cl_src78_src.evt and ../../acisf01041/products/events/fullrun_ccd7_acisf01041_pi14-548_pass1_cl_src78_bgd.evt exist, delete to re-create
[Sat Oct  8 03:59:11 2011] Size of ../../acisf01041/products/events/fullrun_ccd7_acisf01041_pi14-548_pass1_cl_src78_src.evt.gz[events] = 246 counts
[Sat Oct  8 03:59:11 2011] Mean chipx,y = (794.05, 953.88)
[Sat Oct  8 03:59:11 2011] Mean tdetx,y = (4711.05, 2655.88)
[Sat Oct  8 03:59:11 2011] chipx,y range = (760.00-825.00, 920.00-991.00)
[Sat Oct  8 03:59:11 2011] Size of ../../acisf01041/products/events/fullrun_ccd7_acisf01041_pi14-548_pass1_cl_src78_bgd.evt.gz[events] = 853 counts
[Sat Oct  8 03:59:11 2011] ../../acisf01041/products/images/fullrun_ccd7_acisf01041_pi14-548_pass1_cl_src78_src.img and ../../acisf01041/products/images/fullrun_ccd7_acisf01041_pi14-548_pass1_cl_src78_bgd.img exist, delete to re-create
[Sat Oct  8 03:59:11 2011] ../../acisf01041/products/spectra/fullrun_ccd7_acisf01041_pi14-548_pass1_cl_src78_src.pi and ../../acisf01041/products/spectra/fullrun_ccd7_acisf01041_pi14-548_pass1_cl_src78_bgd.pi exist, delete to re-create
[Sat Oct  8 03:59:14 2011] ../../acisf01041/products/lightcurves/fullrun_ccd7_acisf01041_pi14-548_pass1_cl_src78_src.lc and ../../acisf01041/products/lightcurves/fullrun_ccd7_acisf01041_pi14-548_pass1_cl_src78_bgd.lc exist, delete to re-create
[Sat Oct  8 04:01:02 2011] Keeping rmf generated by specextract
[Sat Oct  8 04:01:03 2011] 208.752
[Sat Oct  8 04:01:09 2011] Updating aperture counts using extracted products
[Sat Oct  8 04:01:09 2011] Error reading totcts from fullrun_ccd7_acisf01041_pi14-548_pass1_cl_src78_src.pi.gz
[Sat Oct  8 04:01:10 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct  8 04:01:10 2011] Using photon index=1.80, rate=0.00586, arf fullrun_ccd7_acisf01041_pi14-548_pass1_cl_src78.arf
[Sat Oct  8 04:01:10 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct  8 04:01:10 2011] Updating source flux to 4.8e-14