[Sat Oct  8 03:49:27 2011] Detection parameters:
  Position = (307.1, 83.2) = 5 26 3.19 -66 5 12.8
  Extent = 2.7" x 2.4", rotation angle = 142 degrees
  Source counts = 33876.4 +/- 253.0
  Background counts = 30152.6
  Rate = 1 +/- 0.007

[Sat Oct  8 03:49:27 2011] Off-axis axis estimate = 7.17'
[Sat Oct  8 03:51:31 2011] Using EEF radius (= 2.28 ")to estimate initial spatial extent for simple fitting
[Sat Oct  8 03:51:31 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct  8 03:51:31 2011] Initial guess for spatial extent in simple fitting = 2.28"
[Sat Oct  8 03:51:31 2011] source mask rpix=4.6, npix_max = 105, mask sum = 100, frac = 0.945
[Sat Oct  8 03:51:31 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 2.28"
[Sat Oct  8 03:51:33 2011] fullrun_ccd7_acisf01041_pi14-548_cl_pass0_src1.ximg exists
[Sat Oct  8 03:51:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01041_pi14-548_cl_pass0_src1.csv
[Sat Oct  8 03:51:33 2011] fullrun_ccd7_acisf01041_pi14-548_cl_pass0_src1_1.ximg exists
[Sat Oct  8 03:51:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01041_pi14-548_cl_pass0_src1.csv
[Sat Oct  8 03:51:33 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf01041_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf01041_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  8 03:51:35 2011] fullrun_ccd7_acisf01041_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sat Oct  8 03:51:35 2011] fullrun_ccd7_acisf01041_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Oct  8 03:51:35 2011] Fit fullrun_ccd7_acisf01041_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Oct  8 03:52:06 2011] Spatial fit model total counts = 35682.700000, observed total counts = 35679.000000
[Sat Oct  8 03:52:06 2011] Offset between fit and detection position for source 152 = 3.076696 pixels
[Sat Oct  8 03:52:06 2011] 36019.300000 total counts/ 23329.200000 bgd. counts: snr = 83.083565
Spatial fit parameters:
  Offset between fit and detection position for source 152 = 3.076696 pixels
  Position = (306.3, 80.2) = 5 26 3.29 -66 5 14.5
  Extent = 4.6 (4.5-9.1)", rotation angle = 0
  Source counts = 12690.1 +/- 189.8
  Background counts = 23329.2
  Rate = 0.4 +/- 0.006
[Sat Oct  8 03:52:06 2011] Vigneting correction estimate = 1.000000
[Sat Oct  8 03:52:06 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct  8 03:52:06 2011] Assessing source extent using major axis lower bound
[Sat Oct  8 03:52:06 2011] Source does appear to be extended
[Sat Oct  8 03:52:06 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct  8 03:52:33 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct  8 03:52:33 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct  8 03:52:33 2011] Initial guess for spatial extent in simple fitting = 4.57"
[Sat Oct  8 03:52:33 2011] source mask rpix=9.3, npix_max = 383, mask sum = 380, frac = 0.992
[Sat Oct  8 03:52:33 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 4.57"
[Sat Oct  8 03:52:36 2011] fullrun_ccd7_acisf01041_pi14-548_cl_pass1_src1.ximg exists
[Sat Oct  8 03:52:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01041_pi14-548_cl_pass1_src1.csv
[Sat Oct  8 03:52:36 2011] fullrun_ccd7_acisf01041_pi14-548_cl_pass1_src1_1.ximg exists
[Sat Oct  8 03:52:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01041_pi14-548_cl_pass1_src1.csv
[Sat Oct  8 03:52:36 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf01041_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf01041_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  8 03:52:47 2011] fullrun_ccd7_acisf01041_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sat Oct  8 03:52:47 2011] fullrun_ccd7_acisf01041_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Oct  8 03:52:47 2011] Fit fullrun_ccd7_acisf01041_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Oct  8 03:53:14 2011] Spatial fit model total counts = 83857.100000, observed total counts = 83667.000000
[Sat Oct  8 03:53:14 2011] Offset between fit and detection position for source 152 = 2.219519 pixels
[Sat Oct  8 03:53:14 2011] 84890.200000 total counts/ 54360.000000 bgd. counts: snr = 130.945303
Spatial fit parameters:
  Offset between fit and detection position for source 152 = 2.219519 pixels
  Position = (305.7, 82.3) = 5 26 3.34 -66 5 13.5
  Extent = 6.6 (6.6-6.6)", rotation angle = 0
  Source counts = 30530.2 +/- 291.4
  Background counts = 54360.0
  Rate = 1 +/- 0.009
[Sat Oct  8 03:53:14 2011] Vigneting correction estimate = 1.000000
[Sat Oct  8 03:53:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct  8 03:53:14 2011] Assessing source extent using major axis lower bound
[Sat Oct  8 03:53:14 2011] Source does appear to be extended
[Sat Oct  8 03:53:14 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct  8 03:53:14 2011] Source is confused with source 60
[Sat Oct  8 03:54:38 2011] Not overwriting source region fullrun_ccd7_acisf01041_pi14-548_pass1_cl_src152_src.reg
[Sat Oct  8 03:54:38 2011] Extracting stamp from image fullrun_ccd7_acisf01041_pi14-548_cl_sm2.00.img.gz, (5, 0) - (606, 383)
[Sat Oct  8 03:54:38 2011] Writing fullrun_ccd7_acisf01041_pi14-548_pass1_cl_src152.gif
[Sat Oct  8 03:54:48 2011] ../../acisf01041/products/events/fullrun_ccd7_acisf01041_pi14-548_pass1_cl_src152_src.evt and ../../acisf01041/products/events/fullrun_ccd7_acisf01041_pi14-548_pass1_cl_src152_bgd.evt exist, delete to re-create
[Sat Oct  8 03:54:48 2011] Size of ../../acisf01041/products/events/fullrun_ccd7_acisf01041_pi14-548_pass1_cl_src152_src.evt.gz[events] = 113506 counts
[Sat Oct  8 03:54:48 2011] Mean chipx,y = (950.63, 726.84)
[Sat Oct  8 03:54:48 2011] Mean tdetx,y = (4867.63, 2428.84)
[Sat Oct  8 03:54:48 2011] chipx,y range = (888.00-1023.00, 668.00-806.00)
[Sat Oct  8 03:54:48 2011] Size of ../../acisf01041/products/events/fullrun_ccd7_acisf01041_pi14-548_pass1_cl_src152_bgd.evt.gz[events] = 5737 counts
[Sat Oct  8 03:54:48 2011] ../../acisf01041/products/images/fullrun_ccd7_acisf01041_pi14-548_pass1_cl_src152_src.img and ../../acisf01041/products/images/fullrun_ccd7_acisf01041_pi14-548_pass1_cl_src152_bgd.img exist, delete to re-create
[Sat Oct  8 03:54:48 2011] ../../acisf01041/products/spectra/fullrun_ccd7_acisf01041_pi14-548_pass1_cl_src152_src.pi and ../../acisf01041/products/spectra/fullrun_ccd7_acisf01041_pi14-548_pass1_cl_src152_bgd.pi exist, delete to re-create
[Sat Oct  8 03:54:52 2011] ../../acisf01041/products/lightcurves/fullrun_ccd7_acisf01041_pi14-548_pass1_cl_src152_src.lc and ../../acisf01041/products/lightcurves/fullrun_ccd7_acisf01041_pi14-548_pass1_cl_src152_bgd.lc exist, delete to re-create
[Sat Oct  8 04:01:01 2011] Keeping rmf generated by specextract
[Sat Oct  8 04:01:01 2011] 205.609
[Sat Oct  8 04:01:08 2011] Updating aperture counts using extracted products
[Sat Oct  8 04:01:08 2011] Error reading totcts from fullrun_ccd7_acisf01041_pi14-548_pass1_cl_src152_src.pi.gz
[Sat Oct  8 04:01:09 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct  8 04:01:09 2011] Using photon index=1.80, rate=0.974, arf fullrun_ccd7_acisf01041_pi14-548_pass1_cl_src152.arf
[Sat Oct  8 04:01:09 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct  8 04:01:10 2011] Updating source flux to 7.6e-12
[Sat Oct  8 04:01:25 2011] Flag c found in src. 152 procflags, skipping spectral fitting
[Sat Oct  8 04:11:36 2011] Reading fit data from acisf01041/analysis//spectral/fullrun_ccd7_acisf01041_pi14-548_pass1_cl_src152_pl.csv
[Sat Oct  8 04:11:36 2011] Spectral fit parameter nH value = 9.65512e+21
[Sat Oct  8 04:11:36 2011] Spectral fit parameter PhoIndex value = 8.2532
[Sat Oct  8 04:11:36 2011] Failed to get F(0.3-8.0) from acisf01041/analysis//spectral/fullrun_ccd7_acisf01041_pi14-548_pass1_cl_src152_pl.csv, possibly due to different flux energy range selected
[Sat Oct  8 04:11:36 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct  8 04:11:36 2011] Using Nh = 9.7e+21, photon index=8.25, rate=0.974, arf fullrun_ccd7_acisf01041_pi14-548_pass1_cl_src152.arf
[Sat Oct  8 04:11:36 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct  8 04:11:36 2011] Updating source flux to 3.3e-12