[Sat Oct  8 03:49:15 2011] Detection parameters:
  Position = (1003.6, 798.9) = 5 26 56.13 -66 0 53.2
  Extent = 2.9" x 2.3", rotation angle = 102 degrees
  Source counts = 15.1 +/- 4.9
  Background counts = 8.9
  Rate = 0.0004 +/- 0.0001

[Sat Oct  8 03:49:15 2011] Off-axis axis estimate = 9.34'
[Sat Oct  8 03:51:29 2011] Using EEF radius (= 3.86 ")to estimate initial spatial extent for simple fitting
[Sat Oct  8 03:51:29 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct  8 03:51:29 2011] Initial guess for spatial extent in simple fitting = 3.86"
[Sat Oct  8 03:51:29 2011] source mask rpix=7.8, npix_max = 277, mask sum = 272, frac = 0.979
[Sat Oct  8 03:51:29 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 3.86"
[Sat Oct  8 03:51:29 2011] fullrun_ccd3_acisf01041_pi14-548_cl_pass0_src1.ximg exists
[Sat Oct  8 03:51:29 2011] fullrun_ccd3_acisf01041_pi14-548_cl_pass0_src1_1.ximg exists
[Sat Oct  8 03:51:29 2011] Fit fullrun_ccd3_acisf01041_pi14-548_cl_pass0_src1 appears to have run properly
[Sat Oct  8 03:51:29 2011] fullrun_ccd3_acisf01041_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sat Oct  8 03:51:29 2011] fullrun_ccd3_acisf01041_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Oct  8 03:51:29 2011] Fit fullrun_ccd3_acisf01041_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Oct  8 03:51:50 2011] Spatial fit model total counts = 47.863800, observed total counts = 49.000000
[Sat Oct  8 03:51:50 2011] Offset between fit and detection position for source 1 = 7.580198 pixels
[Sat Oct  8 03:51:50 2011] 47.287450 total counts/ 6.989250 bgd. counts: snr = 15.242997
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 7.580198 pixels
  Position = (1005.2, 806.3) = 5 26 56.04 -66 0 49.8
  Extent = 7.7 (7.7-15.4)" x 4.8 (2.4-6.7)", rotation angle = 100 (77-130) degrees
  Source counts = 40.3 +/- 6.9
  Background counts = 7.0
  Rate = 0.001 +/- 0.0002
[Sat Oct  8 03:51:50 2011] Vigneting correction estimate = 1.000000
[Sat Oct  8 03:51:50 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct  8 03:51:50 2011] Assessing source extent using major axis lower bound
[Sat Oct  8 03:51:50 2011] Source does appear to be extended
[Sat Oct  8 03:51:50 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.15
[Sat Oct  8 03:52:31 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct  8 03:52:31 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct  8 03:52:31 2011] Initial guess for spatial extent in simple fitting = 6.24"
[Sat Oct  8 03:52:31 2011] source mask rpix=12.7, npix_max = 694, mask sum = 702, frac = 1.011
[Sat Oct  8 03:52:31 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 6.24"
[Sat Oct  8 03:52:31 2011] fullrun_ccd3_acisf01041_pi14-548_cl_pass1_src1.ximg exists
[Sat Oct  8 03:52:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01041_pi14-548_cl_pass1_src1.csv
[Sat Oct  8 03:52:31 2011] fullrun_ccd3_acisf01041_pi14-548_cl_pass1_src1_1.ximg exists
[Sat Oct  8 03:52:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01041_pi14-548_cl_pass1_src1.csv
[Sat Oct  8 03:52:31 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf01041_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf01041_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  8 03:52:31 2011] fullrun_ccd3_acisf01041_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sat Oct  8 03:52:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01041_pi14-548_cl_pass1_tfrozen_src1.csv
[Sat Oct  8 03:52:32 2011] fullrun_ccd3_acisf01041_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Oct  8 03:52:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf01041_pi14-548_cl_pass1_tfrozen_src1.csv
[Sat Oct  8 03:52:32 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf01041_pi14-548_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf01041_pi14-548_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  8 03:52:58 2011] Warning, spatial fit 1 centroid is now closest to src. 18
[Sat Oct  8 03:52:58 2011] Source 1 in spatial fitting is no longer close to this source
[Sat Oct  8 03:52:58 2011] Vigneting correction estimate = 1.000000
[Sat Oct  8 03:52:58 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct  8 03:52:58 2011] Assessing source extent using major axis lower bound
[Sat Oct  8 03:52:58 2011] Source does appear to be extended
[Sat Oct  8 03:52:58 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.15
[Sat Oct  8 03:53:56 2011] Not overwriting source region fullrun_ccd3_acisf01041_pi14-548_pass1_cl_src1_src.reg
[Sat Oct  8 03:53:56 2011] Extracting stamp from image fullrun_ccd3_acisf01041_pi14-548_cl_sm2.00.img.gz, (653, 454) - (1051, 1051)
[Sat Oct  8 03:53:56 2011] Writing fullrun_ccd3_acisf01041_pi14-548_pass1_cl_src1.gif
[Sat Oct  8 03:53:56 2011] ../../acisf01041/products/events/fullrun_ccd3_acisf01041_pi14-548_pass1_cl_src1_src.evt and ../../acisf01041/products/events/fullrun_ccd3_acisf01041_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Sat Oct  8 03:53:56 2011] Size of ../../acisf01041/products/events/fullrun_ccd3_acisf01041_pi14-548_pass1_cl_src1_src.evt.gz[events] = 81 counts
[Sat Oct  8 03:53:56 2011] Mean chipx,y = (38.25, 790.85)
[Sat Oct  8 03:53:56 2011] Mean tdetx,y = (4341.15, 3099.25)
[Sat Oct  8 03:53:56 2011] chipx,y range = (3.00-80.00, 727.00-863.00)
[Sat Oct  8 03:53:57 2011] Size of ../../acisf01041/products/events/fullrun_ccd3_acisf01041_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 803 counts
[Sat Oct  8 03:53:57 2011] ../../acisf01041/products/images/fullrun_ccd3_acisf01041_pi14-548_pass1_cl_src1_src.img and ../../acisf01041/products/images/fullrun_ccd3_acisf01041_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Sat Oct  8 03:53:57 2011] ../../acisf01041/products/spectra/fullrun_ccd3_acisf01041_pi14-548_pass1_cl_src1_src.pi and ../../acisf01041/products/spectra/fullrun_ccd3_acisf01041_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Sat Oct  8 03:53:57 2011] Not generating rmf since there are only 40 counts
[Sat Oct  8 03:54:02 2011] ../../acisf01041/products/lightcurves/fullrun_ccd3_acisf01041_pi14-548_pass1_cl_src1_src.lc and ../../acisf01041/products/lightcurves/fullrun_ccd3_acisf01041_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Sat Oct  8 03:54:02 2011] 166.945
[Sat Oct  8 04:01:08 2011] Updating aperture counts using extracted products
[Sat Oct  8 04:01:08 2011] Error reading totcts from fullrun_ccd3_acisf01041_pi14-548_pass1_cl_src1_src.pi.gz
[Sat Oct  8 04:01:08 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct  8 04:01:08 2011] Using photon index=1.80, rate=0.00119, arf fullrun_ccd3_acisf01041_pi14-548_pass1_cl_src1.arf
[Sat Oct  8 04:01:08 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct  8 04:01:08 2011] Updating source flux to 1.5e-14
[Sat Oct  8 04:01:19 2011] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Oct  8 04:01:20 2011] acisf01041/analysis//spectral/fullrun_ccd3_acisf01041_pi14-548_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete