[Tue Nov  1 07:19:59 2011] Detection parameters:
  Position = (430.1, 519.8) = 0 39 9.25 -51 13 5.8
  Extent = 0.9" x 0.6", rotation angle = 146 degrees
  Source counts = 23.1 +/- 4.9
  Background counts = 0.9
  Rate = 0.001 +/- 0.0002

[Tue Nov  1 07:20:00 2011] Off-axis axis estimate = 3.86'
[Tue Nov  1 07:20:46 2011] Using EEF radius (= 0.79 ")to estimate initial spatial extent for simple fitting
[Tue Nov  1 07:20:46 2011] Initial guess for spatial extent in simple fitting = 0.79"
[Tue Nov  1 07:20:46 2011] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.906
[Tue Nov  1 07:20:46 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 0.79"
[Tue Nov  1 07:20:47 2011] fullrun_ccd6_acisf10402_pi14-548_cl_pass0_src3.ximg exists
[Tue Nov  1 07:20:47 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd6_acisf10402_pi14-548_cl_pass0_src3.csv
[Tue Nov  1 07:20:47 2011] fullrun_ccd6_acisf10402_pi14-548_cl_pass0_src3_1.ximg exists
[Tue Nov  1 07:20:47 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd6_acisf10402_pi14-548_cl_pass0_src3.csv
[Tue Nov  1 07:20:47 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf10402_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf10402_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Nov  1 07:20:47 2011] fullrun_ccd6_acisf10402_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Tue Nov  1 07:20:47 2011] fullrun_ccd6_acisf10402_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Tue Nov  1 07:20:47 2011] Fit fullrun_ccd6_acisf10402_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Tue Nov  1 07:20:52 2011] Spatial fit model total counts = 26.736800, observed total counts = 27.000000
[Tue Nov  1 07:20:52 2011] Offset between fit and detection position for source 4 = 0.775808 pixels
[Tue Nov  1 07:20:52 2011] 26.656000 total counts/ 0.000000 bgd. counts: snr = 439411147470952.437500
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.775808 pixels
  Position = (430.8, 520.2) = 0 39 9.24 -51 13 5.9
  Extent = 1.2 (0.8-1.4)", rotation angle = 0
  Source counts = 26.7 +/- 5.2
  Background counts = 0.0
  Rate = 0.001 +/- 0.0003
[Tue Nov  1 07:20:52 2011] Vigneting correction estimate = 1.000000
[Tue Nov  1 07:20:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Nov  1 07:20:52 2011] Assessing source extent using major axis lower bound
[Tue Nov  1 07:20:52 2011] Source does appear to be extended
[Tue Nov  1 07:20:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov  1 07:21:10 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Nov  1 07:21:10 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Nov  1 07:21:10 2011] Initial guess for spatial extent in simple fitting = 1.16"
[Tue Nov  1 07:21:10 2011] source mask rpix=2.4, npix_max = 32, mask sum = 36, frac = 1.104
[Tue Nov  1 07:21:10 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 1.16"
[Tue Nov  1 07:21:11 2011] fullrun_ccd6_acisf10402_pi14-548_cl_pass1_src3.ximg exists
[Tue Nov  1 07:21:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10402_pi14-548_cl_pass1_src3.csv
[Tue Nov  1 07:21:11 2011] fullrun_ccd6_acisf10402_pi14-548_cl_pass1_src3_1.ximg exists
[Tue Nov  1 07:21:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10402_pi14-548_cl_pass1_src3.csv
[Tue Nov  1 07:21:11 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf10402_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf10402_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Nov  1 07:21:11 2011] fullrun_ccd6_acisf10402_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Tue Nov  1 07:21:11 2011] fullrun_ccd6_acisf10402_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Tue Nov  1 07:21:11 2011] Fit fullrun_ccd6_acisf10402_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Tue Nov  1 07:21:15 2011] Spatial fit model total counts = 26.194600, observed total counts = 27.000000
[Tue Nov  1 07:21:15 2011] Offset between fit and detection position for source 4 = 0.184379 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.184379 pixels
  Position = (430.6, 520.3) = 0 39 9.25 -51 13 5.8
  Extent = 1.2 (0.8-1.4)", rotation angle = 0
  Source counts = 26.2 +/- 5.1
  Background counts = 0.0
  Rate = 0.001 +/- 0.0003
[Tue Nov  1 07:21:15 2011] Vigneting correction estimate = 1.000000
[Tue Nov  1 07:21:15 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Nov  1 07:21:15 2011] Assessing source extent using major axis lower bound
[Tue Nov  1 07:21:15 2011] Source does appear to be extended
[Tue Nov  1 07:21:15 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov  1 07:21:41 2011] Not overwriting source region fullrun_ccd6_acisf10402_pi14-548_pass1_cl_src4_src.reg
[Tue Nov  1 07:21:41 2011] Extracting stamp from image fullrun_ccd6_acisf10402_pi14-548_cl_sm2.00.img.gz, (375, 464) - (487, 576)
[Tue Nov  1 07:21:41 2011] Writing fullrun_ccd6_acisf10402_pi14-548_pass1_cl_src4.gif
[Tue Nov  1 07:21:49 2011] ../../acisf10402/products/events/fullrun_ccd6_acisf10402_pi14-548_pass1_cl_src4_src.evt and ../../acisf10402/products/events/fullrun_ccd6_acisf10402_pi14-548_pass1_cl_src4_bgd.evt exist, delete to re-create
[Tue Nov  1 07:21:49 2011] Size of ../../acisf10402/products/events/fullrun_ccd6_acisf10402_pi14-548_pass1_cl_src4_src.evt.gz[events] = 28 counts
[Tue Nov  1 07:21:49 2011] Mean chipx,y = (790.21, 652.00)
[Tue Nov  1 07:21:49 2011] Mean tdetx,y = (3665.21, 2354.00)
[Tue Nov  1 07:21:49 2011] chipx,y range = (772.00-812.00, 632.00-672.00)
[Tue Nov  1 07:21:49 2011] Size of ../../acisf10402/products/events/fullrun_ccd6_acisf10402_pi14-548_pass1_cl_src4_bgd.evt.gz[events] = 20 counts
[Tue Nov  1 07:21:49 2011] ../../acisf10402/products/images/fullrun_ccd6_acisf10402_pi14-548_pass1_cl_src4_src.img and ../../acisf10402/products/images/fullrun_ccd6_acisf10402_pi14-548_pass1_cl_src4_bgd.img exist, delete to re-create
[Tue Nov  1 07:21:49 2011] ../../acisf10402/products/spectra/fullrun_ccd6_acisf10402_pi14-548_pass1_cl_src4_src.pi and ../../acisf10402/products/spectra/fullrun_ccd6_acisf10402_pi14-548_pass1_cl_src4_bgd.pi exist, delete to re-create
[Tue Nov  1 07:21:49 2011] Not generating rmf since there are only 26 counts
[Tue Nov  1 07:21:53 2011] ../../acisf10402/products/lightcurves/fullrun_ccd6_acisf10402_pi14-548_pass1_cl_src4_src.lc and ../../acisf10402/products/lightcurves/fullrun_ccd6_acisf10402_pi14-548_pass1_cl_src4_bgd.lc exist, delete to re-create
[Tue Nov  1 07:22:28 2011] 199.756
[Tue Nov  1 07:23:43 2011] Updating aperture counts using extracted products
[Tue Nov  1 07:23:43 2011] Error reading totcts from fullrun_ccd6_acisf10402_pi14-548_pass1_cl_src4_src.pi.gz
[Tue Nov  1 07:23:43 2011] Calculating source flux in energy range 0.30-8.00
[Tue Nov  1 07:23:43 2011] Using photon index=1.80, rate=0.00132, arf fullrun_ccd6_acisf10402_pi14-548_pass1_cl_src4.arf
[Tue Nov  1 07:23:43 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Nov  1 07:23:43 2011] Updating source flux to 1.5e-14
[Tue Nov  1 07:23:48 2011] Source 4 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Nov  1 07:23:49 2011] acisf10402/analysis//spectral/fullrun_ccd6_acisf10402_pi14-548_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete