[Tue Oct 18 14:18:43 2011] Detection parameters:
  Position = (600.8, 932.9) = 23 51 20.34 20 7 27.4
  Extent = 0.6" x 0.5", rotation angle = 16 degrees
  Source counts = 74.7 +/- 8.8
  Background counts = 2.3
  Rate = 0.004 +/- 0.0005

[Tue Oct 18 14:18:44 2011] Off-axis axis estimate = 1.01'
[Tue Oct 18 14:19:05 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Tue Oct 18 14:19:05 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Tue Oct 18 14:19:05 2011] source mask rpix=0.8, npix_max = 6, mask sum = 4, frac = 0.618
[Tue Oct 18 14:19:05 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.38"
[Tue Oct 18 14:28:28 2011] fullrun_ccd7_acisf10397_pi14-548_cl_pass0_src1.ximg exists
[Tue Oct 18 14:28:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10397_pi14-548_cl_pass0_src1.csv
[Tue Oct 18 14:28:28 2011] fullrun_ccd7_acisf10397_pi14-548_cl_pass0_src1_1.ximg exists
[Tue Oct 18 14:28:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10397_pi14-548_cl_pass0_src1.csv
[Tue Oct 18 14:28:28 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10397_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10397_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 14:28:28 2011] fullrun_ccd7_acisf10397_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Tue Oct 18 14:28:28 2011] fullrun_ccd7_acisf10397_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Oct 18 14:28:28 2011] Fit fullrun_ccd7_acisf10397_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Oct 18 14:28:31 2011] Spatial fit model total counts = 79.864900, observed total counts = 80.000000
[Tue Oct 18 14:28:31 2011] Offset between fit and detection position for source 1 = 0.340347 pixels
[Tue Oct 18 14:28:31 2011] 81.035400 total counts/ 13.404500 bgd. counts: snr = 18.472253
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.340347 pixels
  Position = (601.0, 933.1) = 23 51 20.35 20 7 27.3
  Extent = 0.4 (0.4-0.5)", rotation angle = 0
  Source counts = 67.6 +/- 9.0
  Background counts = 13.4
  Rate = 0.004 +/- 0.0005
[Tue Oct 18 14:28:31 2011] Vigneting correction estimate = 1.000000
[Tue Oct 18 14:28:31 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 18 14:28:31 2011] Assessing source extent using major axis lower bound
[Tue Oct 18 14:28:31 2011] Source does appear to be extended
[Tue Oct 18 14:28:31 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 18 14:28:33 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Oct 18 14:28:33 2011] Initial guess for spatial extent in simple fitting = 0.45"
[Tue Oct 18 14:28:33 2011] source mask rpix=0.9, npix_max = 7, mask sum = 6, frac = 0.756
[Tue Oct 18 14:28:33 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.45"
[Tue Oct 18 14:36:55 2011] fullrun_ccd7_acisf10397_pi14-548_cl_pass1_src1.ximg exists
[Tue Oct 18 14:36:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10397_pi14-548_cl_pass1_src1.csv
[Tue Oct 18 14:36:55 2011] fullrun_ccd7_acisf10397_pi14-548_cl_pass1_src1_1.ximg exists
[Tue Oct 18 14:36:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10397_pi14-548_cl_pass1_src1.csv
[Tue Oct 18 14:36:55 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10397_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10397_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 14:36:55 2011] fullrun_ccd7_acisf10397_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Tue Oct 18 14:36:55 2011] fullrun_ccd7_acisf10397_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Oct 18 14:36:55 2011] Fit fullrun_ccd7_acisf10397_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Oct 18 14:36:57 2011] Spatial fit model total counts = 79.999900, observed total counts = 80.000000
[Tue Oct 18 14:36:57 2011] Offset between fit and detection position for source 1 = 0.008644 pixels
[Tue Oct 18 14:36:57 2011] 80.631900 total counts/ 12.475800 bgd. counts: snr = 19.296144
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.008644 pixels
  Position = (601.0, 933.1) = 23 51 20.35 20 7 27.3
  Extent = 0.5 (0.4-0.5)", rotation angle = 0
  Source counts = 68.2 +/- 9.0
  Background counts = 12.5
  Rate = 0.004 +/- 0.0005
[Tue Oct 18 14:36:57 2011] Vigneting correction estimate = 1.000000
[Tue Oct 18 14:36:57 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 18 14:36:57 2011] Assessing source extent using major axis lower bound
[Tue Oct 18 14:36:57 2011] Source does appear to be extended
[Tue Oct 18 14:36:57 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 18 14:36:59 2011] Writing source region out to fullrun_ccd7_acisf10397_pi14-548_pass1_cl_src1_src.reg
[Tue Oct 18 14:36:59 2011] Extracting stamp from image fullrun_ccd7_acisf10397_pi14-548_cl_sm2.00.img.gz, (580, 912) - (622, 954)
[Tue Oct 18 14:36:59 2011] Writing fullrun_ccd7_acisf10397_pi14-548_pass1_cl_src1.gif
[Tue Oct 18 14:37:01 2011] Size of ../../acisf10397/products/events/fullrun_ccd7_acisf10397_pi14-548_pass1_cl_src1_src.evt.gz[events] = 71 counts
[Tue Oct 18 14:37:01 2011] Mean chipx,y = (107.08, 422.66)
[Tue Oct 18 14:37:01 2011] Mean tdetx,y = (4024.08, 2124.66)
[Tue Oct 18 14:37:01 2011] chipx,y range = (90.00-124.00, 406.00-442.00)
[Tue Oct 18 14:37:01 2011] Size of ../../acisf10397/products/events/fullrun_ccd7_acisf10397_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 11 counts
[Tue Oct 18 14:37:02 2011] Not generating rmf since there are only 68 counts
[Tue Oct 18 14:37:02 2011] arf not found, will run specextract
[Tue Oct 18 14:37:09 2011] ../../acisf10397/products/spectra/fullrun_ccd7_acisf10397_pi14-548_pass1_cl_src1.warf not found
[Tue Oct 18 14:37:09 2011] ../../acisf10397/products/spectra/fullrun_ccd7_acisf10397_pi14-548_pass1_cl_src1.wrmf not found
[Tue Oct 18 14:37:09 2011] Removal of ../../acisf10397/products/spectra/fullrun_ccd7_acisf10397_pi14-548_pass1_cl_src1.soff failed
[Tue Oct 18 14:39:40 2011] Spectrum 1 has only 68 counts, deleting rmf
[Tue Oct 18 14:39:40 2011] 232.037
[Tue Oct 18 14:39:40 2011] Updating aperture counts using extracted products
[Tue Oct 18 14:39:40 2011] Error reading totcts from fullrun_ccd7_acisf10397_pi14-548_pass1_cl_src1_src.pi.gz
[Tue Oct 18 14:39:40 2011] Calculating source flux in energy range 0.30-8.00
[Tue Oct 18 14:39:40 2011] Using photon index=1.80, rate=0.00408, arf fullrun_ccd7_acisf10397_pi14-548_pass1_cl_src1.arf
[Tue Oct 18 14:39:40 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Oct 18 14:39:40 2011] Updating source flux to 3.1e-14
[Tue Oct 18 14:39:41 2011] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Oct 18 14:39:45 2011] acisf10397/analysis//spectral/fullrun_ccd7_acisf10397_pi14-548_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete