[Wed Oct 19 09:43:12 2011] Detection parameters:
  Position = (665.1, 411.2) = 14 59 20.71 -16 45 48.1
  Extent = 1.0" x 0.6", rotation angle = 47 degrees
  Source counts = 80.7 +/- 9.3
  Background counts = 5.3
  Rate = 0.003 +/- 0.0003

[Wed Oct 19 09:43:12 2011] Off-axis axis estimate = 4.59'
[Wed Oct 19 09:44:07 2011] Using EEF radius (= 1.02 ")to estimate initial spatial extent for simple fitting
[Wed Oct 19 09:44:07 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct 19 09:44:07 2011] Initial guess for spatial extent in simple fitting = 1.02"
[Wed Oct 19 09:44:07 2011] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.938
[Wed Oct 19 09:44:07 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 1.02"
[Wed Oct 19 09:44:08 2011] fullrun_ccd7_acisf10390_pi14-548_cl_pass0_src3.ximg exists
[Wed Oct 19 09:44:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10390_pi14-548_cl_pass0_src3.csv
[Wed Oct 19 09:44:08 2011] fullrun_ccd7_acisf10390_pi14-548_cl_pass0_src3_1.ximg exists
[Wed Oct 19 09:44:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10390_pi14-548_cl_pass0_src3.csv
[Wed Oct 19 09:44:08 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10390_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10390_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 19 09:44:08 2011] fullrun_ccd7_acisf10390_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Wed Oct 19 09:44:08 2011] fullrun_ccd7_acisf10390_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Oct 19 09:44:08 2011] Fit fullrun_ccd7_acisf10390_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Wed Oct 19 09:44:16 2011] Spatial fit model total counts = 86.900300, observed total counts = 88.000000
[Wed Oct 19 09:44:16 2011] Offset between fit and detection position for source 21 = 0.896723 pixels
[Wed Oct 19 09:44:16 2011] 86.397830 total counts/ 8.967430 bgd. counts: snr = 25.856962
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 0.896723 pixels
  Position = (665.8, 411.8) = 14 59 20.71 -16 45 48.0
  Extent = 0.9 (0.8-1.1)", rotation angle = 0
  Source counts = 77.4 +/- 9.3
  Background counts = 9.0
  Rate = 0.002 +/- 0.0003
[Wed Oct 19 09:44:16 2011] Vigneting correction estimate = 1.000000
[Wed Oct 19 09:44:16 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 19 09:44:16 2011] Assessing source extent using major axis lower bound
[Wed Oct 19 09:44:16 2011] Source does appear to be extended
[Wed Oct 19 09:44:16 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 19 09:44:34 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct 19 09:44:34 2011] Initial guess for spatial extent in simple fitting = 0.92"
[Wed Oct 19 09:44:34 2011] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.105
[Wed Oct 19 09:44:34 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 0.92"
[Wed Oct 19 09:44:35 2011] fullrun_ccd7_acisf10390_pi14-548_cl_pass1_src3.ximg exists
[Wed Oct 19 09:44:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10390_pi14-548_cl_pass1_src3.csv
[Wed Oct 19 09:44:35 2011] fullrun_ccd7_acisf10390_pi14-548_cl_pass1_src3_1.ximg exists
[Wed Oct 19 09:44:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10390_pi14-548_cl_pass1_src3.csv
[Wed Oct 19 09:44:35 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10390_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10390_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 19 09:44:35 2011] fullrun_ccd7_acisf10390_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Wed Oct 19 09:44:35 2011] fullrun_ccd7_acisf10390_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Wed Oct 19 09:44:35 2011] Fit fullrun_ccd7_acisf10390_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Wed Oct 19 09:44:42 2011] Spatial fit model total counts = 85.981800, observed total counts = 86.000000
[Wed Oct 19 09:44:42 2011] Offset between fit and detection position for source 21 = 0.063682 pixels
[Wed Oct 19 09:44:42 2011] 86.041510 total counts/ 6.856310 bgd. counts: snr = 30.241184
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 0.063682 pixels
  Position = (665.7, 411.7) = 14 59 20.71 -16 45 48.0
  Extent = 0.9 (0.8-1.1)", rotation angle = 0
  Source counts = 79.2 +/- 9.3
  Background counts = 6.9
  Rate = 0.003 +/- 0.0003
[Wed Oct 19 09:44:42 2011] Vigneting correction estimate = 1.000000
[Wed Oct 19 09:44:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 19 09:44:42 2011] Assessing source extent using major axis lower bound
[Wed Oct 19 09:44:42 2011] Source does appear to be extended
[Wed Oct 19 09:44:42 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 19 09:45:22 2011] Not overwriting source region fullrun_ccd7_acisf10390_pi14-548_pass1_cl_src21_src.reg
[Wed Oct 19 09:45:22 2011] Extracting stamp from image fullrun_ccd7_acisf10390_pi14-548_cl_sm2.00.img.gz, (623, 369) - (708, 454)
[Wed Oct 19 09:45:22 2011] Writing fullrun_ccd7_acisf10390_pi14-548_pass1_cl_src21.gif
[Wed Oct 19 09:45:30 2011] ../../acisf10390/products/events/fullrun_ccd7_acisf10390_pi14-548_pass1_cl_src21_src.evt and ../../acisf10390/products/events/fullrun_ccd7_acisf10390_pi14-548_pass1_cl_src21_bgd.evt exist, delete to re-create
[Wed Oct 19 09:45:30 2011] Size of ../../acisf10390/products/events/fullrun_ccd7_acisf10390_pi14-548_pass1_cl_src21_src.evt.gz[events] = 84 counts
[Wed Oct 19 09:45:30 2011] Mean chipx,y = (745.32, 545.08)
[Wed Oct 19 09:45:30 2011] Mean tdetx,y = (4662.32, 2247.08)
[Wed Oct 19 09:45:30 2011] chipx,y range = (726.00-765.00, 526.00-565.00)
[Wed Oct 19 09:45:30 2011] Size of ../../acisf10390/products/events/fullrun_ccd7_acisf10390_pi14-548_pass1_cl_src21_bgd.evt.gz[events] = 56 counts
[Wed Oct 19 09:45:30 2011] ../../acisf10390/products/images/fullrun_ccd7_acisf10390_pi14-548_pass1_cl_src21_src.img and ../../acisf10390/products/images/fullrun_ccd7_acisf10390_pi14-548_pass1_cl_src21_bgd.img exist, delete to re-create
[Wed Oct 19 09:45:30 2011] ../../acisf10390/products/spectra/fullrun_ccd7_acisf10390_pi14-548_pass1_cl_src21_src.pi and ../../acisf10390/products/spectra/fullrun_ccd7_acisf10390_pi14-548_pass1_cl_src21_bgd.pi exist, delete to re-create
[Wed Oct 19 09:45:30 2011] Not generating rmf since there are only 79 counts
[Wed Oct 19 09:45:33 2011] ../../acisf10390/products/lightcurves/fullrun_ccd7_acisf10390_pi14-548_pass1_cl_src21_src.lc and ../../acisf10390/products/lightcurves/fullrun_ccd7_acisf10390_pi14-548_pass1_cl_src21_bgd.lc exist, delete to re-create
[Wed Oct 19 09:46:31 2011] 217.941
[Wed Oct 19 09:46:36 2011] Updating aperture counts using extracted products
[Wed Oct 19 09:46:36 2011] Error reading totcts from fullrun_ccd7_acisf10390_pi14-548_pass1_cl_src21_src.pi.gz
[Wed Oct 19 09:46:37 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 19 09:46:37 2011] Using photon index=1.80, rate=0.0025, arf fullrun_ccd7_acisf10390_pi14-548_pass1_cl_src21.arf
[Wed Oct 19 09:46:37 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 19 09:46:37 2011] Updating source flux to 2e-14
[Wed Oct 19 09:46:47 2011] Source 21 has fewer than 100.000000 counts, skipping spectral fitting