[Wed Oct 19 09:43:11 2011] Detection parameters:
  Position = (545.7, 923.4) = 14 59 24.80 -16 41 36.0
  Extent = 0.7" x 0.7", rotation angle = 35 degrees
  Source counts = 225.1 +/- 15.4
  Background counts = 11.9
  Rate = 0.007 +/- 0.0005

[Wed Oct 19 09:43:12 2011] Off-axis axis estimate = 0.31'
[Wed Oct 19 09:44:07 2011] Using EEF radius (= 0.40 ")to estimate initial spatial extent for simple fitting
[Wed Oct 19 09:44:07 2011] Initial guess for spatial extent in simple fitting = 0.40"
[Wed Oct 19 09:44:07 2011] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.290
[Wed Oct 19 09:44:07 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 0.40"
[Wed Oct 19 09:44:08 2011] fullrun_ccd7_acisf10390_pi14-548_cl_pass0_src2.ximg exists
[Wed Oct 19 09:44:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10390_pi14-548_cl_pass0_src2.csv
[Wed Oct 19 09:44:08 2011] fullrun_ccd7_acisf10390_pi14-548_cl_pass0_src2_1.ximg exists
[Wed Oct 19 09:44:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10390_pi14-548_cl_pass0_src2.csv
[Wed Oct 19 09:44:08 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10390_pi14-548_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10390_pi14-548_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 19 09:44:08 2011] fullrun_ccd7_acisf10390_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Wed Oct 19 09:44:08 2011] fullrun_ccd7_acisf10390_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Wed Oct 19 09:44:08 2011] Fit fullrun_ccd7_acisf10390_pi14-548_cl_pass0_tfrozen_src2 appears to have run properly
[Wed Oct 19 09:44:16 2011] Spatial fit model total counts = 244.491000, observed total counts = 245.000000
[Wed Oct 19 09:44:16 2011] Offset between fit and detection position for source 1 = 0.674592 pixels
[Wed Oct 19 09:44:16 2011] 244.594500 total counts/ 54.854500 bgd. counts: snr = 25.618445
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.674592 pixels
  Position = (546.3, 923.8) = 14 59 24.80 -16 41 36.1
  Extent = 1.0 (0.8-1.1)", rotation angle = 0
  Source counts = 189.7 +/- 15.6
  Background counts = 54.9
  Rate = 0.006 +/- 0.0005
[Wed Oct 19 09:44:16 2011] Vigneting correction estimate = 1.000000
[Wed Oct 19 09:44:16 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 19 09:44:16 2011] Assessing source extent using major axis lower bound
[Wed Oct 19 09:44:16 2011] Source does appear to be extended
[Wed Oct 19 09:44:16 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 19 09:44:34 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct 19 09:44:34 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct 19 09:44:34 2011] Initial guess for spatial extent in simple fitting = 0.96"
[Wed Oct 19 09:44:34 2011] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.044
[Wed Oct 19 09:44:34 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 0.96"
[Wed Oct 19 09:44:35 2011] fullrun_ccd7_acisf10390_pi14-548_cl_pass1_src2.ximg exists
[Wed Oct 19 09:44:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10390_pi14-548_cl_pass1_src2.csv
[Wed Oct 19 09:44:35 2011] fullrun_ccd7_acisf10390_pi14-548_cl_pass1_src2_1.ximg exists
[Wed Oct 19 09:44:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10390_pi14-548_cl_pass1_src2.csv
[Wed Oct 19 09:44:35 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10390_pi14-548_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10390_pi14-548_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 19 09:44:35 2011] fullrun_ccd7_acisf10390_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Wed Oct 19 09:44:35 2011] fullrun_ccd7_acisf10390_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Wed Oct 19 09:44:35 2011] Fit fullrun_ccd7_acisf10390_pi14-548_cl_pass1_tfrozen_src2 appears to have run properly
[Wed Oct 19 09:44:42 2011] Spatial fit model total counts = 245.000000, observed total counts = 245.000000
[Wed Oct 19 09:44:42 2011] Offset between fit and detection position for source 1 = 0.031234 pixels
[Wed Oct 19 09:44:42 2011] 245.223500 total counts/ 56.283500 bgd. counts: snr = 25.184502
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.031234 pixels
  Position = (546.3, 923.7) = 14 59 24.80 -16 41 36.1
  Extent = 1.0 (0.8-1.1)", rotation angle = 0
  Source counts = 188.9 +/- 15.7
  Background counts = 56.3
  Rate = 0.006 +/- 0.0005
[Wed Oct 19 09:44:42 2011] Vigneting correction estimate = 1.000000
[Wed Oct 19 09:44:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 19 09:44:42 2011] Assessing source extent using major axis lower bound
[Wed Oct 19 09:44:42 2011] Source does appear to be extended
[Wed Oct 19 09:44:42 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 19 09:45:22 2011] Not overwriting source region fullrun_ccd7_acisf10390_pi14-548_pass1_cl_src1_src.reg
[Wed Oct 19 09:45:22 2011] Extracting stamp from image fullrun_ccd7_acisf10390_pi14-548_cl_sm2.00.img.gz, (503, 880) - (590, 967)
[Wed Oct 19 09:45:22 2011] Writing fullrun_ccd7_acisf10390_pi14-548_pass1_cl_src1.gif
[Wed Oct 19 09:45:27 2011] ../../acisf10390/products/events/fullrun_ccd7_acisf10390_pi14-548_pass1_cl_src1_src.evt and ../../acisf10390/products/events/fullrun_ccd7_acisf10390_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Wed Oct 19 09:45:27 2011] Size of ../../acisf10390/products/events/fullrun_ccd7_acisf10390_pi14-548_pass1_cl_src1_src.evt.gz[events] = 233 counts
[Wed Oct 19 09:45:27 2011] Mean chipx,y = (220.33, 520.49)
[Wed Oct 19 09:45:27 2011] Mean tdetx,y = (4137.33, 2222.49)
[Wed Oct 19 09:45:27 2011] chipx,y range = (199.00-242.00, 499.00-542.00)
[Wed Oct 19 09:45:27 2011] Size of ../../acisf10390/products/events/fullrun_ccd7_acisf10390_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 115 counts
[Wed Oct 19 09:45:27 2011] ../../acisf10390/products/images/fullrun_ccd7_acisf10390_pi14-548_pass1_cl_src1_src.img and ../../acisf10390/products/images/fullrun_ccd7_acisf10390_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Wed Oct 19 09:45:27 2011] ../../acisf10390/products/spectra/fullrun_ccd7_acisf10390_pi14-548_pass1_cl_src1_src.pi and ../../acisf10390/products/spectra/fullrun_ccd7_acisf10390_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Wed Oct 19 09:45:30 2011] ../../acisf10390/products/lightcurves/fullrun_ccd7_acisf10390_pi14-548_pass1_cl_src1_src.lc and ../../acisf10390/products/lightcurves/fullrun_ccd7_acisf10390_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Wed Oct 19 09:46:31 2011] Keeping rmf generated by specextract
[Wed Oct 19 09:46:31 2011] 235.221
[Wed Oct 19 09:46:36 2011] Updating aperture counts using extracted products
[Wed Oct 19 09:46:36 2011] Error reading totcts from fullrun_ccd7_acisf10390_pi14-548_pass1_cl_src1_src.pi.gz
[Wed Oct 19 09:46:37 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 19 09:46:37 2011] Using photon index=1.80, rate=0.00597, arf fullrun_ccd7_acisf10390_pi14-548_pass1_cl_src1.arf
[Wed Oct 19 09:46:37 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 19 09:46:37 2011] Updating source flux to 4.5e-14