[Thu Oct 27 09:37:04 2011] Detection parameters:
  Position = (802.7, 661.6) = 5 54 37.67 -68 1 58.0
  Extent = 0.8" x 0.6", rotation angle = 163 degrees
  Source counts = 21.8 +/- 5.0
  Background counts = 3.2
  Rate = 0.0006 +/- 0.0001

[Thu Oct 27 09:37:05 2011] Off-axis axis estimate = 2.69'
[Thu Oct 27 09:37:56 2011] Using EEF radius (= 0.52 ")to estimate initial spatial extent for simple fitting
[Thu Oct 27 09:37:56 2011] Initial guess for spatial extent in simple fitting = 0.52"
[Thu Oct 27 09:37:56 2011] source mask rpix=1.1, npix_max = 9, mask sum = 9, frac = 0.921
[Thu Oct 27 09:37:56 2011] Giving source the simple spatial ID 11 for pass 0, mean size = 0.52"
[Thu Oct 27 09:37:58 2011] fullrun_ccd7_acisf01039_pi14-548_cl_pass0_src11.ximg exists
[Thu Oct 27 09:37:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01039_pi14-548_cl_pass0_src11.csv
[Thu Oct 27 09:37:58 2011] fullrun_ccd7_acisf01039_pi14-548_cl_pass0_src11_1.ximg exists
[Thu Oct 27 09:37:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01039_pi14-548_cl_pass0_src11.csv
[Thu Oct 27 09:37:58 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf01039_pi14-548_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf01039_pi14-548_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 27 09:37:58 2011] fullrun_ccd7_acisf01039_pi14-548_cl_pass0_tfrozen_src11.ximg exists
[Thu Oct 27 09:37:58 2011] fullrun_ccd7_acisf01039_pi14-548_cl_pass0_tfrozen_src11_1.ximg exists
[Thu Oct 27 09:37:58 2011] Fit fullrun_ccd7_acisf01039_pi14-548_cl_pass0_tfrozen_src11 appears to have run properly
[Thu Oct 27 09:38:09 2011] Source 10 is offset by -3.284559 and 3.080383 pixels which is larger than
2 X fitted extent = 0.531337 x 0.531337, not incorporating fit results
[Thu Oct 27 09:38:09 2011] Vigneting correction estimate = 1.000000
[Thu Oct 27 09:38:09 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 27 09:38:09 2011] Assessing source extent using major
[Thu Oct 27 09:38:09 2011] Source does appear to be extended
[Thu Oct 27 09:38:09 2011] Computing asymmetry using major and minor axis, asym = 1.33
[Thu Oct 27 09:38:29 2011] Using EEF radius (= 0.52 ")to estimate initial spatial extent for simple fitting
[Thu Oct 27 09:38:29 2011] Initial guess for spatial extent in simple fitting = 0.52"
[Thu Oct 27 09:38:29 2011] source mask rpix=1.1, npix_max = 9, mask sum = 9, frac = 0.921
[Thu Oct 27 09:38:29 2011] Giving source the simple spatial ID 11 for pass 1, mean size = 0.52"
[Thu Oct 27 09:38:30 2011] fullrun_ccd7_acisf01039_pi14-548_cl_pass1_src11.ximg exists
[Thu Oct 27 09:38:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01039_pi14-548_cl_pass1_src11.csv
[Thu Oct 27 09:38:30 2011] fullrun_ccd7_acisf01039_pi14-548_cl_pass1_src11_1.ximg exists
[Thu Oct 27 09:38:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01039_pi14-548_cl_pass1_src11.csv
[Thu Oct 27 09:38:30 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf01039_pi14-548_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf01039_pi14-548_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 27 09:38:31 2011] fullrun_ccd7_acisf01039_pi14-548_cl_pass1_tfrozen_src11.ximg exists
[Thu Oct 27 09:38:31 2011] fullrun_ccd7_acisf01039_pi14-548_cl_pass1_tfrozen_src11_1.ximg exists
[Thu Oct 27 09:38:31 2011] Fit fullrun_ccd7_acisf01039_pi14-548_cl_pass1_tfrozen_src11 appears to have run properly
[Thu Oct 27 09:38:40 2011] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 153.578995 pixels away
[Thu Oct 27 09:38:40 2011] Spatial fit model total counts = 27.851500, observed total counts = 28.000000
[Thu Oct 27 09:38:40 2011] Offset between fit and detection position for source 10 = 0.694134 pixels
[Thu Oct 27 09:38:40 2011] 29.285500 total counts/ 16.543600 bgd. counts: snr = 3.132703
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.694134 pixels
  Position = (802.9, 662.2) = 5 54 37.69 -68 1 57.9
  Extent = 0.4 (0.3-0.6)", rotation angle = 0
  Source counts = 12.7 +/- 5.4
  Background counts = 16.5
  Rate = 0.0003 +/- 0.0001
[Thu Oct 27 09:38:40 2011] Vigneting correction estimate = 1.000000
[Thu Oct 27 09:38:40 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 27 09:38:40 2011] Assessing source extent using major axis lower bound
[Thu Oct 27 09:38:40 2011] Source does appear to be extended
[Thu Oct 27 09:38:40 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 27 09:40:30 2011] Not overwriting source region fullrun_ccd7_acisf01039_pi14-548_pass1_cl_src10_src.reg
[Thu Oct 27 09:40:30 2011] Extracting stamp from image fullrun_ccd7_acisf01039_pi14-548_cl_sm2.00.img.gz, (784, 643) - (822, 682)
[Thu Oct 27 09:40:30 2011] Writing fullrun_ccd7_acisf01039_pi14-548_pass1_cl_src10.gif
[Thu Oct 27 09:41:02 2011] ../../acisf01039/products/events/fullrun_ccd7_acisf01039_pi14-548_pass1_cl_src10_src.evt and ../../acisf01039/products/events/fullrun_ccd7_acisf01039_pi14-548_pass1_cl_src10_bgd.evt exist, delete to re-create
[Thu Oct 27 09:41:02 2011] Size of ../../acisf01039/products/events/fullrun_ccd7_acisf01039_pi14-548_pass1_cl_src10_src.evt.gz[events] = 15 counts
[Thu Oct 27 09:41:02 2011] Mean chipx,y = (411.27, 253.40)
[Thu Oct 27 09:41:02 2011] Mean tdetx,y = (4328.27, 1955.40)
[Thu Oct 27 09:41:02 2011] chipx,y range = (391.00-427.00, 238.00-269.00)
[Thu Oct 27 09:41:02 2011] Size of ../../acisf01039/products/events/fullrun_ccd7_acisf01039_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 15 counts
[Thu Oct 27 09:41:02 2011] ../../acisf01039/products/images/fullrun_ccd7_acisf01039_pi14-548_pass1_cl_src10_src.img and ../../acisf01039/products/images/fullrun_ccd7_acisf01039_pi14-548_pass1_cl_src10_bgd.img exist, delete to re-create
[Thu Oct 27 09:41:02 2011] ../../acisf01039/products/spectra/fullrun_ccd7_acisf01039_pi14-548_pass1_cl_src10_src.pi and ../../acisf01039/products/spectra/fullrun_ccd7_acisf01039_pi14-548_pass1_cl_src10_bgd.pi exist, delete to re-create
[Thu Oct 27 09:41:02 2011] Not generating rmf since there are only 12 counts
[Thu Oct 27 09:41:05 2011] ../../acisf01039/products/lightcurves/fullrun_ccd7_acisf01039_pi14-548_pass1_cl_src10_src.lc and ../../acisf01039/products/lightcurves/fullrun_ccd7_acisf01039_pi14-548_pass1_cl_src10_bgd.lc exist, delete to re-create
[Thu Oct 27 09:42:01 2011] 241.769
[Thu Oct 27 09:42:05 2011] Updating aperture counts using extracted products
[Thu Oct 27 09:42:05 2011] Error reading totcts from fullrun_ccd7_acisf01039_pi14-548_pass1_cl_src10_src.pi.gz
[Thu Oct 27 09:42:05 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct 27 09:42:05 2011] Using photon index=1.80, rate=0.00034, arf fullrun_ccd7_acisf01039_pi14-548_pass1_cl_src10.arf
[Thu Oct 27 09:42:05 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct 27 09:42:05 2011] Updating source flux to 2.2e-15
[Thu Oct 27 09:42:19 2011] Flag b found in src. 10 procflags, skipping spectral fitting
[Thu Oct 27 09:42:19 2011] Source 10 has fewer than 100.000000 counts, skipping spectral fitting