[Sun Oct 30 16:49:31 2011] Detection parameters:
  Position = (353.4, 567.7) = 11 49 23.98 59 18 26.0
  Extent = 1.6" x 1.4", rotation angle = 106 degrees
  Source counts = 125.3 +/- 12.2
  Background counts = 22.7
  Rate = 0.003 +/- 0.0003

[Sun Oct 30 16:49:33 2011] Off-axis axis estimate = 7.51'
[Sun Oct 30 16:50:25 2011] Using EEF radius (= 2.50 ")to estimate initial spatial extent for simple fitting
[Sun Oct 30 16:50:25 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Oct 30 16:50:25 2011] Initial guess for spatial extent in simple fitting = 2.50"
[Sun Oct 30 16:50:25 2011] source mask rpix=5.1, npix_max = 124, mask sum = 121, frac = 0.970
[Sun Oct 30 16:50:25 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 2.50"
[Sun Oct 30 16:50:26 2011] fullrun_ccd6_acisf10389_pi14-548_cl_pass0_src2.ximg exists
[Sun Oct 30 16:50:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10389_pi14-548_cl_pass0_src2.csv
[Sun Oct 30 16:50:26 2011] fullrun_ccd6_acisf10389_pi14-548_cl_pass0_src2_1.ximg exists
[Sun Oct 30 16:50:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10389_pi14-548_cl_pass0_src2.csv
[Sun Oct 30 16:50:26 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf10389_pi14-548_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf10389_pi14-548_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 16:50:26 2011] fullrun_ccd6_acisf10389_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Sun Oct 30 16:50:26 2011] fullrun_ccd6_acisf10389_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Sun Oct 30 16:50:26 2011] Fit fullrun_ccd6_acisf10389_pi14-548_cl_pass0_tfrozen_src2 appears to have run properly
[Sun Oct 30 16:50:37 2011] Spatial fit model total counts = 141.993000, observed total counts = 142.000000
[Sun Oct 30 16:50:37 2011] Offset between fit and detection position for source 2 = 1.661105 pixels
[Sun Oct 30 16:50:37 2011] 140.143600 total counts/ 64.596100 bgd. counts: snr = 9.399764
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 1.661105 pixels
  Position = (353.7, 569.3) = 11 49 23.99 59 18 26.6
  Extent = 2.0 (1.5-2.8)", rotation angle = 0
  Source counts = 75.5 +/- 11.8
  Background counts = 64.6
  Rate = 0.002 +/- 0.0003
[Sun Oct 30 16:50:37 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 16:50:37 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 16:50:37 2011] Assessing source extent using major axis lower bound
[Sun Oct 30 16:50:37 2011] Source does appear to be extended
[Sun Oct 30 16:50:37 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 30 16:50:59 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 30 16:50:59 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Oct 30 16:50:59 2011] Initial guess for spatial extent in simple fitting = 2.02"
[Sun Oct 30 16:50:59 2011] source mask rpix=4.1, npix_max = 84, mask sum = 81, frac = 0.956
[Sun Oct 30 16:50:59 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 2.02"
[Sun Oct 30 16:51:00 2011] fullrun_ccd6_acisf10389_pi14-548_cl_pass1_src2.ximg exists
[Sun Oct 30 16:51:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10389_pi14-548_cl_pass1_src2.csv
[Sun Oct 30 16:51:00 2011] fullrun_ccd6_acisf10389_pi14-548_cl_pass1_src2_1.ximg exists
[Sun Oct 30 16:51:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10389_pi14-548_cl_pass1_src2.csv
[Sun Oct 30 16:51:00 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf10389_pi14-548_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf10389_pi14-548_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 16:51:00 2011] fullrun_ccd6_acisf10389_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Sun Oct 30 16:51:00 2011] fullrun_ccd6_acisf10389_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Sun Oct 30 16:51:00 2011] Fit fullrun_ccd6_acisf10389_pi14-548_cl_pass1_tfrozen_src2 appears to have run properly
[Sun Oct 30 16:51:08 2011] Spatial fit model total counts = 115.609000, observed total counts = 115.000000
[Sun Oct 30 16:51:08 2011] Offset between fit and detection position for source 2 = 0.523298 pixels
[Sun Oct 30 16:51:08 2011] 113.215400 total counts/ 39.825600 bgd. counts: snr = 11.629326
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.523298 pixels
  Position = (354.2, 569.1) = 11 49 23.96 59 18 26.5
  Extent = 1.9 (1.4-2.5)", rotation angle = 0
  Source counts = 73.4 +/- 10.6
  Background counts = 39.8
  Rate = 0.002 +/- 0.0003
[Sun Oct 30 16:51:08 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 16:51:08 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 16:51:08 2011] Assessing source extent using major axis lower bound
[Sun Oct 30 16:51:08 2011] Source does appear to be extended
[Sun Oct 30 16:51:08 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 30 16:51:31 2011] Not overwriting source region fullrun_ccd6_acisf10389_pi14-548_pass1_cl_src2_src.reg
[Sun Oct 30 16:51:31 2011] Extracting stamp from image fullrun_ccd6_acisf10389_pi14-548_cl_sm2.00.img.gz, (267, 482) - (441, 656)
[Sun Oct 30 16:51:31 2011] Writing fullrun_ccd6_acisf10389_pi14-548_pass1_cl_src2.gif
[Sun Oct 30 16:51:36 2011] ../../acisf10389/products/events/fullrun_ccd6_acisf10389_pi14-548_pass1_cl_src2_src.evt and ../../acisf10389/products/events/fullrun_ccd6_acisf10389_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Sun Oct 30 16:51:36 2011] Size of ../../acisf10389/products/events/fullrun_ccd6_acisf10389_pi14-548_pass1_cl_src2_src.evt.gz[events] = 133 counts
[Sun Oct 30 16:51:36 2011] Mean chipx,y = (351.73, 260.53)
[Sun Oct 30 16:51:36 2011] Mean tdetx,y = (3226.73, 1962.53)
[Sun Oct 30 16:51:36 2011] chipx,y range = (322.00-376.00, 231.00-289.00)
[Sun Oct 30 16:51:36 2011] Size of ../../acisf10389/products/events/fullrun_ccd6_acisf10389_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 127 counts
[Sun Oct 30 16:51:36 2011] ../../acisf10389/products/images/fullrun_ccd6_acisf10389_pi14-548_pass1_cl_src2_src.img and ../../acisf10389/products/images/fullrun_ccd6_acisf10389_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Sun Oct 30 16:51:36 2011] ../../acisf10389/products/spectra/fullrun_ccd6_acisf10389_pi14-548_pass1_cl_src2_src.pi and ../../acisf10389/products/spectra/fullrun_ccd6_acisf10389_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Sun Oct 30 16:51:36 2011] Not generating rmf since there are only 73 counts
[Sun Oct 30 16:51:40 2011] ../../acisf10389/products/lightcurves/fullrun_ccd6_acisf10389_pi14-548_pass1_cl_src2_src.lc and ../../acisf10389/products/lightcurves/fullrun_ccd6_acisf10389_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Sun Oct 30 16:52:41 2011] 178.737
[Sun Oct 30 16:54:22 2011] Updating aperture counts using extracted products
[Sun Oct 30 16:54:22 2011] Error reading totcts from fullrun_ccd6_acisf10389_pi14-548_pass1_cl_src2_src.pi.gz
[Sun Oct 30 16:54:22 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 30 16:54:22 2011] Using photon index=1.80, rate=0.0019, arf fullrun_ccd6_acisf10389_pi14-548_pass1_cl_src2.arf
[Sun Oct 30 16:54:22 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 30 16:54:22 2011] Updating source flux to 2.3e-14
[Sun Oct 30 16:54:31 2011] Source 2 has fewer than 100.000000 counts, skipping spectral fitting