[Sun Oct 30 16:49:32 2011] Detection parameters:
  Position = (517.1, 1107.6) = 11 49 13.51 59 22 51.8
  Extent = 0.7" x 0.5", rotation angle = 105 degrees
  Source counts = 15.8 +/- 4.1
  Background counts = 1.2
  Rate = 0.0004 +/- 0.0001

[Sun Oct 30 16:49:33 2011] Off-axis axis estimate = 3.32'
[Sun Oct 30 16:50:25 2011] Using EEF radius (= 0.65 ")to estimate initial spatial extent for simple fitting
[Sun Oct 30 16:50:25 2011] Initial guess for spatial extent in simple fitting = 0.65"
[Sun Oct 30 16:50:25 2011] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.905
[Sun Oct 30 16:50:25 2011] Giving source the simple spatial ID 14 for pass 0, mean size = 0.65"
[Sun Oct 30 16:50:26 2011] fullrun_ccd6_acisf10389_pi14-548_cl_pass0_src14.ximg exists
[Sun Oct 30 16:50:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10389_pi14-548_cl_pass0_src14.csv
[Sun Oct 30 16:50:26 2011] fullrun_ccd6_acisf10389_pi14-548_cl_pass0_src14_1.ximg exists
[Sun Oct 30 16:50:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10389_pi14-548_cl_pass0_src14.csv
[Sun Oct 30 16:50:26 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf10389_pi14-548_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf10389_pi14-548_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 16:50:26 2011] fullrun_ccd6_acisf10389_pi14-548_cl_pass0_tfrozen_src14.ximg exists
[Sun Oct 30 16:50:26 2011] fullrun_ccd6_acisf10389_pi14-548_cl_pass0_tfrozen_src14_1.ximg exists
[Sun Oct 30 16:50:26 2011] Fit fullrun_ccd6_acisf10389_pi14-548_cl_pass0_tfrozen_src14 appears to have run properly
[Sun Oct 30 16:50:37 2011] Spatial fit model total counts = 20.864300, observed total counts = 21.000000
[Sun Oct 30 16:50:37 2011] Offset between fit and detection position for source 11 = 0.810932 pixels
[Sun Oct 30 16:50:37 2011] 20.986710 total counts/ 5.811410 bgd. counts: snr = 6.295011
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.810932 pixels
  Position = (517.5, 1108.3) = 11 49 13.51 59 22 51.9
  Extent = 0.7 (0.5-1.0)", rotation angle = 0
  Source counts = 15.2 +/- 4.6
  Background counts = 5.8
  Rate = 0.0004 +/- 0.0001
[Sun Oct 30 16:50:37 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 16:50:37 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 16:50:37 2011] Assessing source extent using major axis lower bound
[Sun Oct 30 16:50:37 2011] Source does appear to be extended
[Sun Oct 30 16:50:37 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 30 16:50:59 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 30 16:50:59 2011] Initial guess for spatial extent in simple fitting = 0.66"
[Sun Oct 30 16:50:59 2011] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.893
[Sun Oct 30 16:50:59 2011] Giving source the simple spatial ID 14 for pass 1, mean size = 0.66"
[Sun Oct 30 16:51:00 2011] fullrun_ccd6_acisf10389_pi14-548_cl_pass1_src14.ximg exists
[Sun Oct 30 16:51:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10389_pi14-548_cl_pass1_src14.csv
[Sun Oct 30 16:51:00 2011] fullrun_ccd6_acisf10389_pi14-548_cl_pass1_src14_1.ximg exists
[Sun Oct 30 16:51:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10389_pi14-548_cl_pass1_src14.csv
[Sun Oct 30 16:51:00 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf10389_pi14-548_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf10389_pi14-548_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 16:51:01 2011] fullrun_ccd6_acisf10389_pi14-548_cl_pass1_tfrozen_src14.ximg exists
[Sun Oct 30 16:51:01 2011] fullrun_ccd6_acisf10389_pi14-548_cl_pass1_tfrozen_src14_1.ximg exists
[Sun Oct 30 16:51:01 2011] Fit fullrun_ccd6_acisf10389_pi14-548_cl_pass1_tfrozen_src14 appears to have run properly
[Sun Oct 30 16:51:08 2011] Spatial fit model total counts = 20.718500, observed total counts = 21.000000
[Sun Oct 30 16:51:08 2011] Offset between fit and detection position for source 11 = 0.062516 pixels
[Sun Oct 30 16:51:08 2011] 20.766690 total counts/ 5.731090 bgd. counts: snr = 6.280615
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.062516 pixels
  Position = (517.5, 1108.3) = 11 49 13.52 59 22 51.9
  Extent = 0.7 (0.5-0.9)", rotation angle = 0
  Source counts = 15.0 +/- 4.6
  Background counts = 5.7
  Rate = 0.0004 +/- 0.0001
[Sun Oct 30 16:51:08 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 16:51:08 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 16:51:08 2011] Assessing source extent using major axis lower bound
[Sun Oct 30 16:51:08 2011] Source does appear to be extended
[Sun Oct 30 16:51:08 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 30 16:51:32 2011] Not overwriting source region fullrun_ccd6_acisf10389_pi14-548_pass1_cl_src11_src.reg
[Sun Oct 30 16:51:32 2011] Extracting stamp from image fullrun_ccd6_acisf10389_pi14-548_cl_sm2.00.img.gz, (487, 1078) - (547, 1138)
[Sun Oct 30 16:51:32 2011] Writing fullrun_ccd6_acisf10389_pi14-548_pass1_cl_src11.gif
[Sun Oct 30 16:52:13 2011] ../../acisf10389/products/events/fullrun_ccd6_acisf10389_pi14-548_pass1_cl_src11_src.evt and ../../acisf10389/products/events/fullrun_ccd6_acisf10389_pi14-548_pass1_cl_src11_bgd.evt exist, delete to re-create
[Sun Oct 30 16:52:13 2011] Size of ../../acisf10389/products/events/fullrun_ccd6_acisf10389_pi14-548_pass1_cl_src11_src.evt.gz[events] = 17 counts
[Sun Oct 30 16:52:13 2011] Mean chipx,y = (919.12, 250.47)
[Sun Oct 30 16:52:13 2011] Mean tdetx,y = (3794.12, 1952.47)
[Sun Oct 30 16:52:13 2011] chipx,y range = (901.00-932.00, 233.00-267.00)
[Sun Oct 30 16:52:13 2011] Size of ../../acisf10389/products/events/fullrun_ccd6_acisf10389_pi14-548_pass1_cl_src11_bgd.evt.gz[events] = 13 counts
[Sun Oct 30 16:52:13 2011] ../../acisf10389/products/images/fullrun_ccd6_acisf10389_pi14-548_pass1_cl_src11_src.img and ../../acisf10389/products/images/fullrun_ccd6_acisf10389_pi14-548_pass1_cl_src11_bgd.img exist, delete to re-create
[Sun Oct 30 16:52:13 2011] ../../acisf10389/products/spectra/fullrun_ccd6_acisf10389_pi14-548_pass1_cl_src11_src.pi and ../../acisf10389/products/spectra/fullrun_ccd6_acisf10389_pi14-548_pass1_cl_src11_bgd.pi exist, delete to re-create
[Sun Oct 30 16:52:13 2011] Not generating rmf since there are only 15 counts
[Sun Oct 30 16:52:16 2011] ../../acisf10389/products/lightcurves/fullrun_ccd6_acisf10389_pi14-548_pass1_cl_src11_src.lc and ../../acisf10389/products/lightcurves/fullrun_ccd6_acisf10389_pi14-548_pass1_cl_src11_bgd.lc exist, delete to re-create
[Sun Oct 30 16:52:41 2011] 202.315
[Sun Oct 30 16:54:22 2011] Updating aperture counts using extracted products
[Sun Oct 30 16:54:22 2011] Error reading totcts from fullrun_ccd6_acisf10389_pi14-548_pass1_cl_src11_src.pi.gz
[Sun Oct 30 16:54:22 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 30 16:54:22 2011] Using photon index=1.80, rate=0.00039, arf fullrun_ccd6_acisf10389_pi14-548_pass1_cl_src11.arf
[Sun Oct 30 16:54:22 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 30 16:54:22 2011] Updating source flux to 4.3e-15
[Sun Oct 30 16:54:31 2011] Source 11 has fewer than 100.000000 counts, skipping spectral fitting