[Thu Sep 22 06:13:28 2011] Detection parameters:
  Position = (796.8, 1113.3) = 12 6 42.95 64 11 39.1
  Extent = 0.6" x 0.5", rotation angle = 88 degrees
  Source counts = 133.8 +/- 11.7
  Background counts = 2.2
  Rate = 0.003 +/- 0.0003

[Thu Sep 22 06:13:29 2011] Off-axis axis estimate = 2.52'
[Thu Sep 22 06:14:32 2011] Using EEF radius (= 0.49 ")to estimate initial spatial extent for simple fitting
[Thu Sep 22 06:14:32 2011] Initial guess for spatial extent in simple fitting = 0.49"
[Thu Sep 22 06:14:32 2011] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.992
[Thu Sep 22 06:14:32 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 0.49"
[Thu Sep 22 06:14:32 2011] fullrun_ccd6_acisf10382_pi14-548_cl_pass0_src2.ximg exists
[Thu Sep 22 06:14:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10382_pi14-548_cl_pass0_src2.csv
[Thu Sep 22 06:14:32 2011] fullrun_ccd6_acisf10382_pi14-548_cl_pass0_src2_1.ximg exists
[Thu Sep 22 06:14:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10382_pi14-548_cl_pass0_src2.csv
[Thu Sep 22 06:14:32 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf10382_pi14-548_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf10382_pi14-548_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 22 06:14:32 2011] fullrun_ccd6_acisf10382_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Thu Sep 22 06:14:32 2011] fullrun_ccd6_acisf10382_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Thu Sep 22 06:14:32 2011] Fit fullrun_ccd6_acisf10382_pi14-548_cl_pass0_tfrozen_src2 appears to have run properly
[Thu Sep 22 06:14:43 2011] Spatial fit model total counts = 139.000000, observed total counts = 139.000000
[Thu Sep 22 06:14:43 2011] Offset between fit and detection position for source 2 = 0.686172 pixels
[Thu Sep 22 06:14:43 2011] 139.246290 total counts/ 5.250290 bgd. counts: snr = 58.479034
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.686172 pixels
  Position = (797.3, 1113.8) = 12 6 42.95 64 11 39.1
  Extent = 0.7 (0.6-0.7)", rotation angle = 0
  Source counts = 134.0 +/- 11.8
  Background counts = 5.3
  Rate = 0.003 +/- 0.0003
[Thu Sep 22 06:14:43 2011] Vigneting correction estimate = 1.000000
[Thu Sep 22 06:14:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 22 06:14:43 2011] Assessing source extent using major axis lower bound
[Thu Sep 22 06:14:43 2011] Source does appear to be extended
[Thu Sep 22 06:14:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 22 06:15:05 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Sep 22 06:15:05 2011] Initial guess for spatial extent in simple fitting = 0.65"
[Thu Sep 22 06:15:05 2011] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.193
[Thu Sep 22 06:15:05 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 0.65"
[Thu Sep 22 06:15:06 2011] fullrun_ccd6_acisf10382_pi14-548_cl_pass1_src2.ximg exists
[Thu Sep 22 06:15:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10382_pi14-548_cl_pass1_src2.csv
[Thu Sep 22 06:15:06 2011] fullrun_ccd6_acisf10382_pi14-548_cl_pass1_src2_1.ximg exists
[Thu Sep 22 06:15:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10382_pi14-548_cl_pass1_src2.csv
[Thu Sep 22 06:15:06 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf10382_pi14-548_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf10382_pi14-548_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 22 06:15:06 2011] fullrun_ccd6_acisf10382_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Thu Sep 22 06:15:06 2011] fullrun_ccd6_acisf10382_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Thu Sep 22 06:15:06 2011] Fit fullrun_ccd6_acisf10382_pi14-548_cl_pass1_tfrozen_src2 appears to have run properly
[Thu Sep 22 06:15:18 2011] Spatial fit model total counts = 137.726000, observed total counts = 138.000000
[Thu Sep 22 06:15:18 2011] Offset between fit and detection position for source 2 = 0.011767 pixels
[Thu Sep 22 06:15:18 2011] 138.003260 total counts/ 3.397260 bgd. counts: snr = 73.029786
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.011767 pixels
  Position = (797.3, 1113.8) = 12 6 42.95 64 11 39.1
  Extent = 0.7 (0.6-0.7)", rotation angle = 0
  Source counts = 134.6 +/- 11.7
  Background counts = 3.4
  Rate = 0.003 +/- 0.0003
[Thu Sep 22 06:15:18 2011] Vigneting correction estimate = 1.000000
[Thu Sep 22 06:15:18 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 22 06:15:18 2011] Assessing source extent using major axis lower bound
[Thu Sep 22 06:15:18 2011] Source does appear to be extended
[Thu Sep 22 06:15:18 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 22 06:15:38 2011] Not overwriting source region fullrun_ccd6_acisf10382_pi14-548_pass1_cl_src2_src.reg
[Thu Sep 22 06:15:38 2011] Extracting stamp from image fullrun_ccd6_acisf10382_pi14-548_cl_sm2.00.img.gz, (767, 1083) - (828, 1144)
[Thu Sep 22 06:15:38 2011] Writing fullrun_ccd6_acisf10382_pi14-548_pass1_cl_src2.gif
[Thu Sep 22 06:15:44 2011] ../../acisf10382/products/events/fullrun_ccd6_acisf10382_pi14-548_pass1_cl_src2_src.evt and ../../acisf10382/products/events/fullrun_ccd6_acisf10382_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Thu Sep 22 06:15:44 2011] Size of ../../acisf10382/products/events/fullrun_ccd6_acisf10382_pi14-548_pass1_cl_src2_src.evt.gz[events] = 136 counts
[Thu Sep 22 06:15:44 2011] Mean chipx,y = (945.30, 413.76)
[Thu Sep 22 06:15:44 2011] Mean tdetx,y = (3820.30, 2115.76)
[Thu Sep 22 06:15:44 2011] chipx,y range = (924.00-964.00, 396.00-433.00)
[Thu Sep 22 06:15:44 2011] Size of ../../acisf10382/products/events/fullrun_ccd6_acisf10382_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 21 counts
[Thu Sep 22 06:15:44 2011] ../../acisf10382/products/images/fullrun_ccd6_acisf10382_pi14-548_pass1_cl_src2_src.img and ../../acisf10382/products/images/fullrun_ccd6_acisf10382_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Thu Sep 22 06:15:44 2011] ../../acisf10382/products/spectra/fullrun_ccd6_acisf10382_pi14-548_pass1_cl_src2_src.pi and ../../acisf10382/products/spectra/fullrun_ccd6_acisf10382_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Thu Sep 22 06:15:47 2011] ../../acisf10382/products/lightcurves/fullrun_ccd6_acisf10382_pi14-548_pass1_cl_src2_src.lc and ../../acisf10382/products/lightcurves/fullrun_ccd6_acisf10382_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Thu Sep 22 06:16:29 2011] Keeping rmf generated by specextract
[Thu Sep 22 06:16:29 2011] 206.665
[Thu Sep 22 06:17:51 2011] Updating aperture counts using extracted products
[Thu Sep 22 06:17:51 2011] Error reading totcts from fullrun_ccd6_acisf10382_pi14-548_pass1_cl_src2_src.pi.gz
[Thu Sep 22 06:17:51 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 22 06:17:51 2011] Using photon index=1.80, rate=0.00317, arf fullrun_ccd6_acisf10382_pi14-548_pass1_cl_src2.arf
[Thu Sep 22 06:17:51 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Sep 22 06:17:51 2011] Updating source flux to 3.4e-14
[Thu Sep 22 06:18:06 2011] Reading fit data from acisf10382/analysis//spectral/fullrun_ccd6_acisf10382_pi14-548_pass1_cl_src2_pl.csv
[Thu Sep 22 06:18:06 2011] Spectral fit parameter nH value = 3.11928e+13
[Thu Sep 22 06:18:06 2011] Spectral fit parameter PhoIndex value = 2.42327
[Thu Sep 22 06:18:06 2011] Failed to get F(0.3-8.0) from acisf10382/analysis//spectral/fullrun_ccd6_acisf10382_pi14-548_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Thu Sep 22 06:18:06 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 22 06:18:06 2011] Using Nh = 3.1e+13, photon index=2.42, rate=0.00317, arf fullrun_ccd6_acisf10382_pi14-548_pass1_cl_src2.arf
[Thu Sep 22 06:18:06 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Sep 22 06:18:06 2011] Updating source flux to 3.5e-14