[Sun Oct  2 20:27:34 2011] Detection parameters:
  Position = (158.7, 467.6) = 4 3 56.92 -36 3 7.0
  Extent = 0.6" x 0.5", rotation angle = 33 degrees
  Source counts = 11.3 +/- 3.5
  Background counts = 0.7
  Rate = 0.002 +/- 0.0006

[Sun Oct  2 20:27:35 2011] Off-axis axis estimate = 2.26'
[Sun Oct  2 20:27:41 2011] Using EEF radius (= 0.46 ")to estimate initial spatial extent for simple fitting
[Sun Oct  2 20:27:41 2011] Initial guess for spatial extent in simple fitting = 0.46"
[Sun Oct  2 20:27:41 2011] source mask rpix=0.9, npix_max = 8, mask sum = 9, frac = 1.096
[Sun Oct  2 20:27:41 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.46"
[Sun Oct  2 20:27:42 2011] fullrun_ccd7_acisf10374_pi14-548_cl_pass0_src1.ximg exists
[Sun Oct  2 20:27:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10374_pi14-548_cl_pass0_src1.csv
[Sun Oct  2 20:27:42 2011] fullrun_ccd7_acisf10374_pi14-548_cl_pass0_src1_1.ximg exists
[Sun Oct  2 20:27:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10374_pi14-548_cl_pass0_src1.csv
[Sun Oct  2 20:27:42 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10374_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10374_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct  2 20:27:42 2011] fullrun_ccd7_acisf10374_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sun Oct  2 20:27:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10374_pi14-548_cl_pass0_tfrozen_src1.csv
[Sun Oct  2 20:27:42 2011] fullrun_ccd7_acisf10374_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Oct  2 20:27:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10374_pi14-548_cl_pass0_tfrozen_src1.csv
[Sun Oct  2 20:27:42 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10374_pi14-548_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10374_pi14-548_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct  2 20:27:43 2011] Spatial fit model total counts = 12.411200, observed total counts = 15.000000
[Sun Oct  2 20:27:43 2011] Offset between fit and detection position for source 1 = 0.359603 pixels
[Sun Oct  2 20:27:43 2011] 11.529101 total counts/ 0.000001 bgd. counts: snr = 10141.455559
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.359603 pixels
  Position = (158.9, 467.9) = 4 3 56.93 -36 3 7.1
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 11.5 +/- 3.4
  Background counts = 0.0
  Rate = 0.002 +/- 0.0006
[Sun Oct  2 20:27:43 2011] Vigneting correction estimate = 1.000000
[Sun Oct  2 20:27:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct  2 20:27:43 2011] Assessing source extent using major axis lower bound
[Sun Oct  2 20:27:43 2011] Source does appear to be extended
[Sun Oct  2 20:27:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct  2 20:27:43 2011] Deleting source due to low Poisson probability 0.8