[Sat Oct 15 12:28:24 2011] Detection parameters:
  Position = (536.0, 852.0) = 9 2 58.37 46 52 6.2
  Extent = 0.7" x 0.5", rotation angle = 63 degrees
  Source counts = 10.6 +/- 3.3
  Background counts = 0.4
  Rate = 0.002 +/- 0.0006

[Sat Oct 15 12:28:24 2011] Off-axis axis estimate = 1.13'
[Sat Oct 15 12:28:29 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Sat Oct 15 12:28:29 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Sat Oct 15 12:28:29 2011] source mask rpix=0.8, npix_max = 6, mask sum = 4, frac = 0.616
[Sat Oct 15 12:28:29 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 0.38"
[Sat Oct 15 12:28:30 2011] fullrun_ccd7_acisf10371_pi14-548_cl_pass0_src2.ximg exists
[Sat Oct 15 12:28:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10371_pi14-548_cl_pass0_src2.csv
[Sat Oct 15 12:28:30 2011] fullrun_ccd7_acisf10371_pi14-548_cl_pass0_src2_1.ximg exists
[Sat Oct 15 12:28:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10371_pi14-548_cl_pass0_src2.csv
[Sat Oct 15 12:28:30 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10371_pi14-548_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10371_pi14-548_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 12:28:30 2011] fullrun_ccd7_acisf10371_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Sat Oct 15 12:28:30 2011] fullrun_ccd7_acisf10371_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Sat Oct 15 12:28:30 2011] Fit fullrun_ccd7_acisf10371_pi14-548_cl_pass0_tfrozen_src2 appears to have run properly
[Sat Oct 15 12:28:31 2011] Spatial fit model total counts = 11.318600, observed total counts = 12.000000
[Sat Oct 15 12:28:31 2011] Offset between fit and detection position for source 2 = 0.729525 pixels
[Sat Oct 15 12:28:31 2011] 11.311600 total counts/ 0.000000 bgd. counts: snr = 187038870779583.437500
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.729525 pixels
  Position = (536.6, 852.5) = 9 2 58.37 46 52 6.2
  Extent = 0.7 (0.4-1.0)", rotation angle = 0
  Source counts = 11.3 +/- 3.4
  Background counts = 0.0
  Rate = 0.002 +/- 0.0006
[Sat Oct 15 12:28:31 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 12:28:31 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 12:28:31 2011] Assessing source extent using major axis lower bound
[Sat Oct 15 12:28:31 2011] Source does appear to be extended
[Sat Oct 15 12:28:31 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 15 12:28:33 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 15 12:28:33 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct 15 12:28:33 2011] Initial guess for spatial extent in simple fitting = 0.70"
[Sat Oct 15 12:28:33 2011] source mask rpix=1.4, npix_max = 14, mask sum = 12, frac = 0.806
[Sat Oct 15 12:28:33 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 0.70"
[Sat Oct 15 12:28:33 2011] fullrun_ccd7_acisf10371_pi14-548_cl_pass1_src2.ximg exists
[Sat Oct 15 12:28:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10371_pi14-548_cl_pass1_src2.csv
[Sat Oct 15 12:28:33 2011] fullrun_ccd7_acisf10371_pi14-548_cl_pass1_src2_1.ximg exists
[Sat Oct 15 12:28:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10371_pi14-548_cl_pass1_src2.csv
[Sat Oct 15 12:28:33 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10371_pi14-548_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10371_pi14-548_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 12:28:33 2011] fullrun_ccd7_acisf10371_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Sat Oct 15 12:28:33 2011] fullrun_ccd7_acisf10371_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Sat Oct 15 12:28:33 2011] Fit fullrun_ccd7_acisf10371_pi14-548_cl_pass1_tfrozen_src2 appears to have run properly
[Sat Oct 15 12:28:34 2011] Spatial fit model total counts = 10.493200, observed total counts = 12.000000
[Sat Oct 15 12:28:34 2011] Offset between fit and detection position for source 2 = 0.094951 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.094951 pixels
  Position = (536.5, 852.4) = 9 2 58.38 46 52 6.2
  Extent = 0.9 (0.7-1.4)" x 0.4 (0.2-0.6)", rotation angle = 115 (100-135) degrees
  Source counts = 10.5 +/- 3.2
  Background counts = 0.0
  Rate = 0.002 +/- 0.0006
[Sat Oct 15 12:28:34 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 12:28:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 12:28:34 2011] Assessing source extent using major axis lower bound
[Sat Oct 15 12:28:34 2011] Source does appear to be extended
[Sat Oct 15 12:28:34 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.22
[Sat Oct 15 12:28:37 2011] Not overwriting source region fullrun_ccd7_acisf10371_pi14-548_pass1_cl_src2_src.reg
[Sat Oct 15 12:28:37 2011] Extracting stamp from image fullrun_ccd7_acisf10371_pi14-548_cl_sm2.00.img.gz, (493, 809) - (580, 896)
[Sat Oct 15 12:28:37 2011] Writing fullrun_ccd7_acisf10371_pi14-548_pass1_cl_src2.gif
[Sat Oct 15 12:28:40 2011] ../../acisf10371/products/events/fullrun_ccd7_acisf10371_pi14-548_pass1_cl_src2_src.evt and ../../acisf10371/products/events/fullrun_ccd7_acisf10371_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Sat Oct 15 12:28:40 2011] Size of ../../acisf10371/products/events/fullrun_ccd7_acisf10371_pi14-548_pass1_cl_src2_src.evt.gz[events] = 10 counts
[Sat Oct 15 12:28:40 2011] Mean chipx,y = (54.70, 482.30)
[Sat Oct 15 12:28:40 2011] Mean tdetx,y = (3971.70, 2184.30)
[Sat Oct 15 12:28:40 2011] chipx,y range = (36.00-68.00, 463.00-494.00)
[Sat Oct 15 12:28:40 2011] Size of ../../acisf10371/products/events/fullrun_ccd7_acisf10371_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 11 counts
[Sat Oct 15 12:28:40 2011] ../../acisf10371/products/images/fullrun_ccd7_acisf10371_pi14-548_pass1_cl_src2_src.img and ../../acisf10371/products/images/fullrun_ccd7_acisf10371_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Sat Oct 15 12:28:40 2011] ../../acisf10371/products/spectra/fullrun_ccd7_acisf10371_pi14-548_pass1_cl_src2_src.pi and ../../acisf10371/products/spectra/fullrun_ccd7_acisf10371_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Sat Oct 15 12:28:40 2011] Not generating rmf since there are only 10 counts
[Sat Oct 15 12:28:42 2011] ../../acisf10371/products/lightcurves/fullrun_ccd7_acisf10371_pi14-548_pass1_cl_src2_src.lc and ../../acisf10371/products/lightcurves/fullrun_ccd7_acisf10371_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Sat Oct 15 12:28:48 2011] 230.057
[Sat Oct 15 12:28:49 2011] Updating aperture counts using extracted products
[Sat Oct 15 12:28:49 2011] Error reading totcts from fullrun_ccd7_acisf10371_pi14-548_pass1_cl_src2_src.pi.gz
[Sat Oct 15 12:28:49 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 15 12:28:49 2011] Using photon index=1.80, rate=0.00187, arf fullrun_ccd7_acisf10371_pi14-548_pass1_cl_src2.arf
[Sat Oct 15 12:28:49 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 15 12:28:49 2011] Updating source flux to 1.4e-14
[Sat Oct 15 12:28:49 2011] Source 2 has fewer than 100.000000 counts, skipping spectral fitting