[Mon Oct 24 00:56:51 2011] Detection parameters:
  Position = (1005.4, 422.7) = 20 15 47.38 37 11 23.1
  Extent = 0.6" x 0.5", rotation angle = 3 degrees
  Source counts = 14.3 +/- 3.9
  Background counts = 0.7
  Rate = 0.0008 +/- 0.0002

[Mon Oct 24 00:56:52 2011] Off-axis axis estimate = 2.65'
[Mon Oct 24 00:57:35 2011] Using EEF radius (= 0.52 ")to estimate initial spatial extent for simple fitting
[Mon Oct 24 00:57:35 2011] Initial guess for spatial extent in simple fitting = 0.52"
[Mon Oct 24 00:57:35 2011] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.938
[Mon Oct 24 00:57:35 2011] Giving source the simple spatial ID 11 for pass 0, mean size = 0.52"
[Mon Oct 24 00:57:36 2011] fullrun_ccd7_acisf01037_pi14-548_cl_pass0_src11.ximg exists
[Mon Oct 24 00:57:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01037_pi14-548_cl_pass0_src11.csv
[Mon Oct 24 00:57:36 2011] fullrun_ccd7_acisf01037_pi14-548_cl_pass0_src11_1.ximg exists
[Mon Oct 24 00:57:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01037_pi14-548_cl_pass0_src11.csv
[Mon Oct 24 00:57:36 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf01037_pi14-548_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf01037_pi14-548_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 24 00:57:36 2011] fullrun_ccd7_acisf01037_pi14-548_cl_pass0_tfrozen_src11.ximg exists
[Mon Oct 24 00:57:36 2011] fullrun_ccd7_acisf01037_pi14-548_cl_pass0_tfrozen_src11_1.ximg exists
[Mon Oct 24 00:57:36 2011] Fit fullrun_ccd7_acisf01037_pi14-548_cl_pass0_tfrozen_src11 appears to have run properly
[Mon Oct 24 00:57:43 2011] Spatial fit model total counts = 15.401300, observed total counts = 16.000000
[Mon Oct 24 00:57:43 2011] Offset between fit and detection position for source 19 = 0.718625 pixels
[Mon Oct 24 00:57:43 2011] 15.677290 total counts/ 1.700190 bgd. counts: snr = 10.719347
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.718625 pixels
  Position = (1006.0, 423.2) = 20 15 47.38 37 11 23.1
  Extent = 0.6 (0.4-0.7)", rotation angle = 0
  Source counts = 14.0 +/- 4.0
  Background counts = 1.7
  Rate = 0.0008 +/- 0.0002
[Mon Oct 24 00:57:43 2011] Vigneting correction estimate = 1.000000
[Mon Oct 24 00:57:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 24 00:57:43 2011] Assessing source extent using major axis lower bound
[Mon Oct 24 00:57:43 2011] Source does appear to be extended
[Mon Oct 24 00:57:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 24 00:58:00 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 24 00:58:00 2011] Initial guess for spatial extent in simple fitting = 0.58"
[Mon Oct 24 00:58:00 2011] source mask rpix=1.2, npix_max = 11, mask sum = 16, frac = 1.416
[Mon Oct 24 00:58:00 2011] Giving source the simple spatial ID 11 for pass 1, mean size = 0.58"
[Mon Oct 24 00:58:01 2011] fullrun_ccd7_acisf01037_pi14-548_cl_pass1_src11.ximg exists
[Mon Oct 24 00:58:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01037_pi14-548_cl_pass1_src11.csv
[Mon Oct 24 00:58:01 2011] fullrun_ccd7_acisf01037_pi14-548_cl_pass1_src11_1.ximg exists
[Mon Oct 24 00:58:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01037_pi14-548_cl_pass1_src11.csv
[Mon Oct 24 00:58:01 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf01037_pi14-548_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf01037_pi14-548_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 24 00:58:01 2011] fullrun_ccd7_acisf01037_pi14-548_cl_pass1_tfrozen_src11.ximg exists
[Mon Oct 24 00:58:01 2011] fullrun_ccd7_acisf01037_pi14-548_cl_pass1_tfrozen_src11_1.ximg exists
[Mon Oct 24 00:58:01 2011] Fit fullrun_ccd7_acisf01037_pi14-548_cl_pass1_tfrozen_src11 appears to have run properly
[Mon Oct 24 00:58:09 2011] Spatial fit model total counts = 16.448700, observed total counts = 17.000000
[Mon Oct 24 00:58:09 2011] Offset between fit and detection position for source 19 = 0.225873 pixels
[Mon Oct 24 00:58:09 2011] 16.733970 total counts/ 3.738970 bgd. counts: snr = 6.720480
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.225873 pixels
  Position = (1006.2, 423.1) = 20 15 47.37 37 11 23.1
  Extent = 0.5 (0.3-0.7)", rotation angle = 0
  Source counts = 13.0 +/- 4.1
  Background counts = 3.7
  Rate = 0.0007 +/- 0.0002
[Mon Oct 24 00:58:09 2011] Vigneting correction estimate = 1.000000
[Mon Oct 24 00:58:09 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 24 00:58:09 2011] Assessing source extent using major axis lower bound
[Mon Oct 24 00:58:09 2011] Source does appear to be extended
[Mon Oct 24 00:58:09 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 24 00:59:37 2011] Not overwriting source region fullrun_ccd7_acisf01037_pi14-548_pass1_cl_src19_src.reg
[Mon Oct 24 00:59:37 2011] Extracting stamp from image fullrun_ccd7_acisf01037_pi14-548_cl_sm2.00.img.gz, (983, 400) - (1029, 446)
[Mon Oct 24 00:59:37 2011] Writing fullrun_ccd7_acisf01037_pi14-548_pass1_cl_src19.gif
[Mon Oct 24 01:00:12 2011] ../../acisf01037/products/events/fullrun_ccd7_acisf01037_pi14-548_pass1_cl_src19_src.evt and ../../acisf01037/products/events/fullrun_ccd7_acisf01037_pi14-548_pass1_cl_src19_bgd.evt exist, delete to re-create
[Mon Oct 24 01:00:12 2011] Size of ../../acisf01037/products/events/fullrun_ccd7_acisf01037_pi14-548_pass1_cl_src19_src.evt.gz[events] = 14 counts
[Mon Oct 24 01:00:12 2011] Mean chipx,y = (236.43, 194.57)
[Mon Oct 24 01:00:12 2011] Mean tdetx,y = (4153.43, 1896.57)
[Mon Oct 24 01:00:12 2011] chipx,y range = (217.00-251.00, 177.00-213.00)
[Mon Oct 24 01:00:12 2011] Size of ../../acisf01037/products/events/fullrun_ccd7_acisf01037_pi14-548_pass1_cl_src19_bgd.evt.gz[events] = 6 counts
[Mon Oct 24 01:00:12 2011] ../../acisf01037/products/images/fullrun_ccd7_acisf01037_pi14-548_pass1_cl_src19_src.img and ../../acisf01037/products/images/fullrun_ccd7_acisf01037_pi14-548_pass1_cl_src19_bgd.img exist, delete to re-create
[Mon Oct 24 01:00:12 2011] ../../acisf01037/products/spectra/fullrun_ccd7_acisf01037_pi14-548_pass1_cl_src19_src.pi and ../../acisf01037/products/spectra/fullrun_ccd7_acisf01037_pi14-548_pass1_cl_src19_bgd.pi exist, delete to re-create
[Mon Oct 24 01:00:12 2011] Not generating rmf since there are only 12 counts
[Mon Oct 24 01:00:15 2011] ../../acisf01037/products/lightcurves/fullrun_ccd7_acisf01037_pi14-548_pass1_cl_src19_src.lc and ../../acisf01037/products/lightcurves/fullrun_ccd7_acisf01037_pi14-548_pass1_cl_src19_bgd.lc exist, delete to re-create
[Mon Oct 24 01:01:33 2011] 239.547
[Mon Oct 24 01:01:36 2011] Updating aperture counts using extracted products
[Mon Oct 24 01:01:36 2011] Error reading totcts from fullrun_ccd7_acisf01037_pi14-548_pass1_cl_src19_src.pi.gz
[Mon Oct 24 01:01:36 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 24 01:01:36 2011] Using photon index=1.80, rate=0.000729, arf fullrun_ccd7_acisf01037_pi14-548_pass1_cl_src19.arf
[Mon Oct 24 01:01:36 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 24 01:01:36 2011] Updating source flux to 9e-15
[Mon Oct 24 01:01:50 2011] Source 19 has fewer than 100.000000 counts, skipping spectral fitting