[Mon Oct 10 05:18:41 2011] Detection parameters:
  Position = (865.9, 700.8) = 8 10 4.32 34 57 14.8
  Extent = 0.6" x 0.5", rotation angle = 31 degrees
  Source counts = 11.6 +/- 3.5
  Background counts = 0.4
  Rate = 0.001 +/- 0.0004

[Mon Oct 10 05:18:41 2011] Off-axis axis estimate = 2.33'
[Mon Oct 10 05:19:15 2011] Using EEF radius (= 0.47 ")to estimate initial spatial extent for simple fitting
[Mon Oct 10 05:19:15 2011] Initial guess for spatial extent in simple fitting = 0.47"
[Mon Oct 10 05:19:15 2011] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.067
[Mon Oct 10 05:19:15 2011] Giving source the simple spatial ID 6 for pass 0, mean size = 0.47"
[Mon Oct 10 05:19:16 2011] fullrun_ccd7_acisf10359_pi14-548_cl_pass0_src6.ximg exists
[Mon Oct 10 05:19:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10359_pi14-548_cl_pass0_src6.csv
[Mon Oct 10 05:19:16 2011] fullrun_ccd7_acisf10359_pi14-548_cl_pass0_src6_1.ximg exists
[Mon Oct 10 05:19:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10359_pi14-548_cl_pass0_src6.csv
[Mon Oct 10 05:19:16 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10359_pi14-548_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10359_pi14-548_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 10 05:19:16 2011] fullrun_ccd7_acisf10359_pi14-548_cl_pass0_tfrozen_src6.ximg exists
[Mon Oct 10 05:19:16 2011] fullrun_ccd7_acisf10359_pi14-548_cl_pass0_tfrozen_src6_1.ximg exists
[Mon Oct 10 05:19:16 2011] Fit fullrun_ccd7_acisf10359_pi14-548_cl_pass0_tfrozen_src6 appears to have run properly
[Mon Oct 10 05:19:21 2011] Spatial fit model total counts = 12.920600, observed total counts = 15.000000
[Mon Oct 10 05:19:21 2011] Offset between fit and detection position for source 3 = 0.724788 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.724788 pixels
  Position = (866.4, 701.2) = 8 10 4.32 34 57 14.8
  Extent = 0.9" x 0.4", rotation angle = 341
  Source counts = 12.2 +/- 3.5
  Background counts = 0.0
  Rate = 0.002 +/- 0.0004
[Mon Oct 10 05:19:21 2011] Vigneting correction estimate = 1.000000
[Mon Oct 10 05:19:21 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 10 05:19:21 2011] Assessing source extent using major
[Mon Oct 10 05:19:21 2011] Source does appear to be extended
[Mon Oct 10 05:19:21 2011] Computing asymmetry using major and minor axis, asym = 2.23
[Mon Oct 10 05:19:21 2011] Source is asymmetric
[Mon Oct 10 05:19:35 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 10 05:19:35 2011] Initial guess for spatial extent in simple fitting = 0.62"
[Mon Oct 10 05:19:35 2011] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.976
[Mon Oct 10 05:19:35 2011] Giving source the simple spatial ID 6 for pass 1, mean size = 0.62"
[Mon Oct 10 05:19:38 2011] fullrun_ccd7_acisf10359_pi14-548_cl_pass1_src6.ximg exists
[Mon Oct 10 05:19:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10359_pi14-548_cl_pass1_src6.csv
[Mon Oct 10 05:19:38 2011] fullrun_ccd7_acisf10359_pi14-548_cl_pass1_src6_1.ximg exists
[Mon Oct 10 05:19:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10359_pi14-548_cl_pass1_src6.csv
[Mon Oct 10 05:19:38 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10359_pi14-548_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10359_pi14-548_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 10 05:19:38 2011] fullrun_ccd7_acisf10359_pi14-548_cl_pass1_tfrozen_src6.ximg exists
[Mon Oct 10 05:19:38 2011] fullrun_ccd7_acisf10359_pi14-548_cl_pass1_tfrozen_src6_1.ximg exists
[Mon Oct 10 05:19:38 2011] Fit fullrun_ccd7_acisf10359_pi14-548_cl_pass1_tfrozen_src6 appears to have run properly
[Mon Oct 10 05:19:43 2011] Spatial fit model total counts = 14.292100, observed total counts = 15.000000
[Mon Oct 10 05:19:43 2011] Offset between fit and detection position for source 3 = 0.050714 pixels
[Mon Oct 10 05:19:43 2011] 13.964960 total counts/ 2.418460 bgd. counts: snr = 7.424734
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.050714 pixels
  Position = (866.5, 701.3) = 8 10 4.32 34 57 14.8
  Extent = 0.6 (0.5-0.9)", rotation angle = 0
  Source counts = 11.5 +/- 3.7
  Background counts = 2.4
  Rate = 0.001 +/- 0.0005
[Mon Oct 10 05:19:43 2011] Vigneting correction estimate = 1.000000
[Mon Oct 10 05:19:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 10 05:19:43 2011] Assessing source extent using major axis lower bound
[Mon Oct 10 05:19:43 2011] Source does appear to be extended
[Mon Oct 10 05:19:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 10 05:20:25 2011] Not overwriting source region fullrun_ccd7_acisf10359_pi14-548_pass1_cl_src3_src.reg
[Mon Oct 10 05:20:25 2011] Extracting stamp from image fullrun_ccd7_acisf10359_pi14-548_cl_sm2.00.img.gz, (838, 672) - (895, 730)
[Mon Oct 10 05:20:25 2011] Writing fullrun_ccd7_acisf10359_pi14-548_pass1_cl_src3.gif
[Mon Oct 10 05:20:43 2011] ../../acisf10359/products/events/fullrun_ccd7_acisf10359_pi14-548_pass1_cl_src3_src.evt and ../../acisf10359/products/events/fullrun_ccd7_acisf10359_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Mon Oct 10 05:20:43 2011] Size of ../../acisf10359/products/events/fullrun_ccd7_acisf10359_pi14-548_pass1_cl_src3_src.evt.gz[events] = 12 counts
[Mon Oct 10 05:20:43 2011] Mean chipx,y = (385.75, 284.67)
[Mon Oct 10 05:20:43 2011] Mean tdetx,y = (4302.75, 1986.67)
[Mon Oct 10 05:20:43 2011] chipx,y range = (366.00-396.00, 271.00-302.00)
[Mon Oct 10 05:20:43 2011] Size of ../../acisf10359/products/events/fullrun_ccd7_acisf10359_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 4 counts
[Mon Oct 10 05:20:43 2011] ../../acisf10359/products/images/fullrun_ccd7_acisf10359_pi14-548_pass1_cl_src3_src.img and ../../acisf10359/products/images/fullrun_ccd7_acisf10359_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Mon Oct 10 05:20:43 2011] ../../acisf10359/products/spectra/fullrun_ccd7_acisf10359_pi14-548_pass1_cl_src3_src.pi and ../../acisf10359/products/spectra/fullrun_ccd7_acisf10359_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Mon Oct 10 05:20:43 2011] Not generating rmf since there are only 11 counts
[Mon Oct 10 05:20:46 2011] ../../acisf10359/products/lightcurves/fullrun_ccd7_acisf10359_pi14-548_pass1_cl_src3_src.lc and ../../acisf10359/products/lightcurves/fullrun_ccd7_acisf10359_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Mon Oct 10 05:21:12 2011] 231.208
[Mon Oct 10 05:21:14 2011] Updating aperture counts using extracted products
[Mon Oct 10 05:21:14 2011] Error reading totcts from fullrun_ccd7_acisf10359_pi14-548_pass1_cl_src3_src.pi.gz
[Mon Oct 10 05:21:15 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 10 05:21:15 2011] Using photon index=1.80, rate=0.00147, arf fullrun_ccd7_acisf10359_pi14-548_pass1_cl_src3.arf
[Mon Oct 10 05:21:15 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 10 05:21:15 2011] Updating source flux to 1.1e-14
[Mon Oct 10 05:21:20 2011] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Oct 10 05:21:21 2011] acisf10359/analysis//spectral/fullrun_ccd7_acisf10359_pi14-548_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete