[Wed Sep 28 19:17:11 2011] Detection parameters:
  Position = (637.4, 145.5) = 9 6 47.76 4 52 7.1
  Extent = 0.7" x 0.5", rotation angle = 23 degrees
  Source counts = 28.4 +/- 5.4
  Background counts = 0.6
  Rate = 0.002 +/- 0.0003

[Wed Sep 28 19:17:11 2011] Off-axis axis estimate = 3.43'
[Wed Sep 28 19:17:50 2011] Using EEF radius (= 0.68 ")to estimate initial spatial extent for simple fitting
[Wed Sep 28 19:17:50 2011] Initial guess for spatial extent in simple fitting = 0.68"
[Wed Sep 28 19:17:50 2011] source mask rpix=1.4, npix_max = 14, mask sum = 9, frac = 0.642
[Wed Sep 28 19:17:50 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 0.68"
[Wed Sep 28 19:17:51 2011] fullrun_ccd6_acisf10346_pi14-548_cl_pass0_src3.ximg exists
[Wed Sep 28 19:17:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10346_pi14-548_cl_pass0_src3.csv
[Wed Sep 28 19:17:51 2011] fullrun_ccd6_acisf10346_pi14-548_cl_pass0_src3_1.ximg exists
[Wed Sep 28 19:17:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10346_pi14-548_cl_pass0_src3.csv
[Wed Sep 28 19:17:51 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf10346_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf10346_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 19:17:51 2011] fullrun_ccd6_acisf10346_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Wed Sep 28 19:17:51 2011] fullrun_ccd6_acisf10346_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Sep 28 19:17:51 2011] Fit fullrun_ccd6_acisf10346_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Wed Sep 28 19:17:56 2011] Spatial fit model total counts = 28.435400, observed total counts = 29.000000
[Wed Sep 28 19:17:56 2011] Offset between fit and detection position for source 10 = 0.513415 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.513415 pixels
  Position = (637.5, 146.0) = 9 6 47.77 4 52 7.1
  Extent = 0.9 (0.8-1.0)", rotation angle = 0
  Source counts = 28.5 +/- 5.3
  Background counts = 0.0
  Rate = 0.002 +/- 0.0003
[Wed Sep 28 19:17:56 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 19:17:56 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 19:17:56 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 19:17:56 2011] Source does appear to be extended
[Wed Sep 28 19:17:56 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 19:18:18 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep 28 19:18:18 2011] Initial guess for spatial extent in simple fitting = 0.90"
[Wed Sep 28 19:18:18 2011] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.923
[Wed Sep 28 19:18:18 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 0.90"
[Wed Sep 28 19:18:19 2011] fullrun_ccd6_acisf10346_pi14-548_cl_pass1_src3.ximg exists
[Wed Sep 28 19:18:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10346_pi14-548_cl_pass1_src3.csv
[Wed Sep 28 19:18:19 2011] fullrun_ccd6_acisf10346_pi14-548_cl_pass1_src3_1.ximg exists
[Wed Sep 28 19:18:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10346_pi14-548_cl_pass1_src3.csv
[Wed Sep 28 19:18:19 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf10346_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf10346_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 19:18:19 2011] fullrun_ccd6_acisf10346_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Wed Sep 28 19:18:19 2011] fullrun_ccd6_acisf10346_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Wed Sep 28 19:18:19 2011] Fit fullrun_ccd6_acisf10346_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Wed Sep 28 19:18:24 2011] Spatial fit model total counts = 27.707300, observed total counts = 29.000000
[Wed Sep 28 19:18:24 2011] Offset between fit and detection position for source 10 = 0.020065 pixels
[Wed Sep 28 19:18:24 2011] 27.745000 total counts/ 0.000000 bgd. counts: snr = 917536331344425.625000
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.020065 pixels
  Position = (637.5, 146.0) = 9 6 47.77 4 52 7.1
  Extent = 0.9 (0.7-1.0)", rotation angle = 0
  Source counts = 27.7 +/- 5.3
  Background counts = 0.0
  Rate = 0.002 +/- 0.0003
[Wed Sep 28 19:18:24 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 19:18:24 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 19:18:24 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 19:18:24 2011] Source does appear to be extended
[Wed Sep 28 19:18:24 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 19:18:53 2011] Not overwriting source region fullrun_ccd6_acisf10346_pi14-548_pass1_cl_src10_src.reg
[Wed Sep 28 19:18:53 2011] Extracting stamp from image fullrun_ccd6_acisf10346_pi14-548_cl_sm2.00.img.gz, (596, 104) - (679, 188)
[Wed Sep 28 19:18:53 2011] Writing fullrun_ccd6_acisf10346_pi14-548_pass1_cl_src10.gif
[Wed Sep 28 19:19:00 2011] ../../acisf10346/products/events/fullrun_ccd6_acisf10346_pi14-548_pass1_cl_src10_src.evt and ../../acisf10346/products/events/fullrun_ccd6_acisf10346_pi14-548_pass1_cl_src10_bgd.evt exist, delete to re-create
[Wed Sep 28 19:19:00 2011] Size of ../../acisf10346/products/events/fullrun_ccd6_acisf10346_pi14-548_pass1_cl_src10_src.evt.gz[events] = 29 counts
[Wed Sep 28 19:19:00 2011] Mean chipx,y = (976.97, 834.45)
[Wed Sep 28 19:19:00 2011] Mean tdetx,y = (3851.97, 2536.45)
[Wed Sep 28 19:19:00 2011] chipx,y range = (961.00-996.00, 812.00-850.00)
[Wed Sep 28 19:19:00 2011] Size of ../../acisf10346/products/events/fullrun_ccd6_acisf10346_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 8 counts
[Wed Sep 28 19:19:00 2011] ../../acisf10346/products/images/fullrun_ccd6_acisf10346_pi14-548_pass1_cl_src10_src.img and ../../acisf10346/products/images/fullrun_ccd6_acisf10346_pi14-548_pass1_cl_src10_bgd.img exist, delete to re-create
[Wed Sep 28 19:19:00 2011] ../../acisf10346/products/spectra/fullrun_ccd6_acisf10346_pi14-548_pass1_cl_src10_src.pi and ../../acisf10346/products/spectra/fullrun_ccd6_acisf10346_pi14-548_pass1_cl_src10_bgd.pi exist, delete to re-create
[Wed Sep 28 19:19:00 2011] Not generating rmf since there are only 27 counts
[Wed Sep 28 19:19:02 2011] ../../acisf10346/products/lightcurves/fullrun_ccd6_acisf10346_pi14-548_pass1_cl_src10_src.lc and ../../acisf10346/products/lightcurves/fullrun_ccd6_acisf10346_pi14-548_pass1_cl_src10_bgd.lc exist, delete to re-create
[Wed Sep 28 19:19:23 2011] 201.985
[Wed Sep 28 19:21:09 2011] Updating aperture counts using extracted products
[Wed Sep 28 19:21:09 2011] Error reading totcts from fullrun_ccd6_acisf10346_pi14-548_pass1_cl_src10_src.pi.gz
[Wed Sep 28 19:21:09 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 19:21:09 2011] Using photon index=1.80, rate=0.00174, arf fullrun_ccd6_acisf10346_pi14-548_pass1_cl_src10.arf
[Wed Sep 28 19:21:09 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 28 19:21:09 2011] Updating source flux to 1.9e-14
[Wed Sep 28 19:21:17 2011] Source 10 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Sep 28 19:21:18 2011] acisf10346/analysis//spectral/fullrun_ccd6_acisf10346_pi14-548_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete