[Tue Oct 18 02:17:59 2011] Detection parameters:
  Position = (606.6, 171.2) = 2 4 16.66 -20 48 43.4
  Extent = 0.7" x 0.5", rotation angle = 82 degrees
  Source counts = 10.6 +/- 3.3
  Background counts = 0.4
  Rate = 0.0007 +/- 0.0002

[Tue Oct 18 02:17:59 2011] Off-axis axis estimate = 2.37'
[Tue Oct 18 02:18:39 2011] Using EEF radius (= 0.47 ")to estimate initial spatial extent for simple fitting
[Tue Oct 18 02:18:39 2011] Initial guess for spatial extent in simple fitting = 0.47"
[Tue Oct 18 02:18:39 2011] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.050
[Tue Oct 18 02:18:39 2011] Giving source the simple spatial ID 8 for pass 0, mean size = 0.47"
[Tue Oct 18 02:18:40 2011] fullrun_ccd6_acisf10345_pi14-548_cl_pass0_src8.ximg exists
[Tue Oct 18 02:18:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10345_pi14-548_cl_pass0_src8.csv
[Tue Oct 18 02:18:40 2011] fullrun_ccd6_acisf10345_pi14-548_cl_pass0_src8_1.ximg exists
[Tue Oct 18 02:18:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10345_pi14-548_cl_pass0_src8.csv
[Tue Oct 18 02:18:40 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf10345_pi14-548_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf10345_pi14-548_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 02:18:40 2011] fullrun_ccd6_acisf10345_pi14-548_cl_pass0_tfrozen_src8.ximg exists
[Tue Oct 18 02:18:40 2011] fullrun_ccd6_acisf10345_pi14-548_cl_pass0_tfrozen_src8_1.ximg exists
[Tue Oct 18 02:18:40 2011] Fit fullrun_ccd6_acisf10345_pi14-548_cl_pass0_tfrozen_src8 appears to have run properly
[Tue Oct 18 02:18:45 2011] Spatial fit model total counts = 11.288500, observed total counts = 11.000000
[Tue Oct 18 02:18:45 2011] Offset between fit and detection position for source 10 = 0.708176 pixels
[Tue Oct 18 02:18:45 2011] 11.313100 total counts/ 0.000000 bgd. counts: snr = 133531718065205.187500
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.708176 pixels
  Position = (607.1, 171.7) = 2 4 16.66 -20 48 43.4
  Extent = 0.7 (0.6-0.9)", rotation angle = 0
  Source counts = 11.3 +/- 3.4
  Background counts = 0.0
  Rate = 0.0008 +/- 0.0002
[Tue Oct 18 02:18:45 2011] Vigneting correction estimate = 1.000000
[Tue Oct 18 02:18:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 18 02:18:45 2011] Assessing source extent using major axis lower bound
[Tue Oct 18 02:18:45 2011] Source does appear to be extended
[Tue Oct 18 02:18:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 18 02:19:01 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Oct 18 02:19:01 2011] Initial guess for spatial extent in simple fitting = 0.69"
[Tue Oct 18 02:19:01 2011] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.094
[Tue Oct 18 02:19:01 2011] Giving source the simple spatial ID 8 for pass 1, mean size = 0.69"
[Tue Oct 18 02:19:02 2011] fullrun_ccd6_acisf10345_pi14-548_cl_pass1_src8.ximg exists
[Tue Oct 18 02:19:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10345_pi14-548_cl_pass1_src8.csv
[Tue Oct 18 02:19:02 2011] fullrun_ccd6_acisf10345_pi14-548_cl_pass1_src8_1.ximg exists
[Tue Oct 18 02:19:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10345_pi14-548_cl_pass1_src8.csv
[Tue Oct 18 02:19:02 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf10345_pi14-548_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf10345_pi14-548_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 02:19:02 2011] fullrun_ccd6_acisf10345_pi14-548_cl_pass1_tfrozen_src8.ximg exists
[Tue Oct 18 02:19:02 2011] fullrun_ccd6_acisf10345_pi14-548_cl_pass1_tfrozen_src8_1.ximg exists
[Tue Oct 18 02:19:02 2011] Fit fullrun_ccd6_acisf10345_pi14-548_cl_pass1_tfrozen_src8 appears to have run properly
[Tue Oct 18 02:19:07 2011] Spatial fit model total counts = 11.672000, observed total counts = 11.000000
[Tue Oct 18 02:19:07 2011] Offset between fit and detection position for source 10 = 0.101520 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.101520 pixels
  Position = (607.2, 171.8) = 2 4 16.66 -20 48 43.4
  Extent = 0.7 (0.6-0.9)", rotation angle = 0
  Source counts = 11.7 +/- 3.4
  Background counts = 0.0
  Rate = 0.0008 +/- 0.0002
[Tue Oct 18 02:19:07 2011] Vigneting correction estimate = 1.000000
[Tue Oct 18 02:19:07 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 18 02:19:07 2011] Assessing source extent using major axis lower bound
[Tue Oct 18 02:19:07 2011] Source does appear to be extended
[Tue Oct 18 02:19:07 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 18 02:19:46 2011] Not overwriting source region fullrun_ccd6_acisf10345_pi14-548_pass1_cl_src10_src.reg
[Tue Oct 18 02:19:46 2011] Extracting stamp from image fullrun_ccd6_acisf10345_pi14-548_cl_sm2.00.img.gz, (574, 139) - (640, 205)
[Tue Oct 18 02:19:46 2011] Writing fullrun_ccd6_acisf10345_pi14-548_pass1_cl_src10.gif
[Tue Oct 18 02:20:08 2011] ../../acisf10345/products/events/fullrun_ccd6_acisf10345_pi14-548_pass1_cl_src10_src.evt and ../../acisf10345/products/events/fullrun_ccd6_acisf10345_pi14-548_pass1_cl_src10_bgd.evt exist, delete to re-create
[Tue Oct 18 02:20:08 2011] Size of ../../acisf10345/products/events/fullrun_ccd6_acisf10345_pi14-548_pass1_cl_src10_src.evt.gz[events] = 11 counts
[Tue Oct 18 02:20:08 2011] Mean chipx,y = (1006.09, 314.00)
[Tue Oct 18 02:20:08 2011] Mean tdetx,y = (3881.09, 2016.00)
[Tue Oct 18 02:20:08 2011] chipx,y range = (998.00-1021.00, 301.00-332.00)
[Tue Oct 18 02:20:08 2011] Size of ../../acisf10345/products/events/fullrun_ccd6_acisf10345_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 10 counts
[Tue Oct 18 02:20:08 2011] ../../acisf10345/products/images/fullrun_ccd6_acisf10345_pi14-548_pass1_cl_src10_src.img and ../../acisf10345/products/images/fullrun_ccd6_acisf10345_pi14-548_pass1_cl_src10_bgd.img exist, delete to re-create
[Tue Oct 18 02:20:08 2011] ../../acisf10345/products/spectra/fullrun_ccd6_acisf10345_pi14-548_pass1_cl_src10_src.pi and ../../acisf10345/products/spectra/fullrun_ccd6_acisf10345_pi14-548_pass1_cl_src10_bgd.pi exist, delete to re-create
[Tue Oct 18 02:20:08 2011] Not generating rmf since there are only 11 counts
[Tue Oct 18 02:20:11 2011] ../../acisf10345/products/lightcurves/fullrun_ccd6_acisf10345_pi14-548_pass1_cl_src10_src.lc and ../../acisf10345/products/lightcurves/fullrun_ccd6_acisf10345_pi14-548_pass1_cl_src10_bgd.lc exist, delete to re-create
[Tue Oct 18 02:20:31 2011] 137.26
[Tue Oct 18 02:21:07 2011] Updating aperture counts using extracted products
[Tue Oct 18 02:21:07 2011] Error reading totcts from fullrun_ccd6_acisf10345_pi14-548_pass1_cl_src10_src.pi.gz
[Tue Oct 18 02:21:07 2011] Calculating source flux in energy range 0.30-8.00
[Tue Oct 18 02:21:07 2011] Using photon index=1.80, rate=0.000786, arf fullrun_ccd6_acisf10345_pi14-548_pass1_cl_src10.arf
[Tue Oct 18 02:21:07 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Oct 18 02:21:07 2011] Updating source flux to 1.3e-14
[Tue Oct 18 02:21:12 2011] Source 10 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Oct 18 02:21:13 2011] acisf10345/analysis//spectral/fullrun_ccd6_acisf10345_pi14-548_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete