[Sat Oct 15 03:34:42 2011] Detection parameters:
  Position = (1224.9, 836.8) = 16 51 45.46 43 27 25.1
  Extent = 0.7" x 0.5", rotation angle = 55 degrees
  Source counts = 46.3 +/- 6.9
  Background counts = 0.7
  Rate = 0.005 +/- 0.0007

[Sat Oct 15 03:34:43 2011] Off-axis axis estimate = 3.34'
[Sat Oct 15 03:35:07 2011] Using EEF radius (= 0.65 ")to estimate initial spatial extent for simple fitting
[Sat Oct 15 03:35:07 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct 15 03:35:07 2011] Initial guess for spatial extent in simple fitting = 0.65"
[Sat Oct 15 03:35:07 2011] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.197
[Sat Oct 15 03:35:07 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 0.65"
[Sat Oct 15 03:35:08 2011] fullrun_ccd7_acisf10329_pi14-548_cl_pass0_src2.ximg exists
[Sat Oct 15 03:35:08 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd7_acisf10329_pi14-548_cl_pass0_src2.csv
[Sat Oct 15 03:35:08 2011] fullrun_ccd7_acisf10329_pi14-548_cl_pass0_src2_1.ximg exists
[Sat Oct 15 03:35:08 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd7_acisf10329_pi14-548_cl_pass0_src2.csv
[Sat Oct 15 03:35:08 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10329_pi14-548_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10329_pi14-548_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 03:35:08 2011] fullrun_ccd7_acisf10329_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Sat Oct 15 03:35:08 2011] fullrun_ccd7_acisf10329_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Sat Oct 15 03:35:08 2011] Fit fullrun_ccd7_acisf10329_pi14-548_cl_pass0_tfrozen_src2 appears to have run properly
[Sat Oct 15 03:35:11 2011] Spatial fit model total counts = 45.747000, observed total counts = 47.000000
[Sat Oct 15 03:35:11 2011] Offset between fit and detection position for source 5 = 0.768008 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.768008 pixels
  Position = (1225.4, 837.3) = 16 51 45.46 43 27 25.1
  Extent = 0.8 (0.7-0.9)", rotation angle = 0
  Source counts = 45.2 +/- 6.7
  Background counts = 0.0
  Rate = 0.005 +/- 0.0007
[Sat Oct 15 03:35:11 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 03:35:11 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 03:35:11 2011] Assessing source extent using major axis lower bound
[Sat Oct 15 03:35:11 2011] Source does appear to be extended
[Sat Oct 15 03:35:11 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 15 03:35:23 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 15 03:35:23 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct 15 03:35:23 2011] Initial guess for spatial extent in simple fitting = 0.80"
[Sat Oct 15 03:35:23 2011] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.117
[Sat Oct 15 03:35:23 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 0.80"
[Sat Oct 15 03:35:24 2011] fullrun_ccd7_acisf10329_pi14-548_cl_pass1_src2.ximg exists
[Sat Oct 15 03:35:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10329_pi14-548_cl_pass1_src2.csv
[Sat Oct 15 03:35:24 2011] fullrun_ccd7_acisf10329_pi14-548_cl_pass1_src2_1.ximg exists
[Sat Oct 15 03:35:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10329_pi14-548_cl_pass1_src2.csv
[Sat Oct 15 03:35:24 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10329_pi14-548_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10329_pi14-548_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 03:35:24 2011] fullrun_ccd7_acisf10329_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Sat Oct 15 03:35:24 2011] fullrun_ccd7_acisf10329_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Sat Oct 15 03:35:24 2011] Fit fullrun_ccd7_acisf10329_pi14-548_cl_pass1_tfrozen_src2 appears to have run properly
[Sat Oct 15 03:35:27 2011] Spatial fit model total counts = 44.832500, observed total counts = 47.000000
[Sat Oct 15 03:35:27 2011] Offset between fit and detection position for source 5 = 0.062685 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.062685 pixels
  Position = (1225.4, 837.4) = 16 51 45.46 43 27 25.2
  Extent = 0.8 (0.7-0.9)", rotation angle = 0
  Source counts = 44.2 +/- 6.7
  Background counts = 0.0
  Rate = 0.004 +/- 0.0007
[Sat Oct 15 03:35:27 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 03:35:27 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 03:35:27 2011] Assessing source extent using major axis lower bound
[Sat Oct 15 03:35:27 2011] Source does appear to be extended
[Sat Oct 15 03:35:27 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 15 03:36:01 2011] Not overwriting source region fullrun_ccd7_acisf10329_pi14-548_pass1_cl_src5_src.reg
[Sat Oct 15 03:36:01 2011] Extracting stamp from image fullrun_ccd7_acisf10329_pi14-548_cl_sm2.00.img.gz, (1190, 802) - (1261, 873)
[Sat Oct 15 03:36:01 2011] Writing fullrun_ccd7_acisf10329_pi14-548_pass1_cl_src5.gif
[Sat Oct 15 03:36:05 2011] ../../acisf10329/products/events/fullrun_ccd7_acisf10329_pi14-548_pass1_cl_src5_src.evt and ../../acisf10329/products/events/fullrun_ccd7_acisf10329_pi14-548_pass1_cl_src5_bgd.evt exist, delete to re-create
[Sat Oct 15 03:36:05 2011] Size of ../../acisf10329/products/events/fullrun_ccd7_acisf10329_pi14-548_pass1_cl_src5_src.evt.gz[events] = 47 counts
[Sat Oct 15 03:36:05 2011] Mean chipx,y = (57.00, 884.89)
[Sat Oct 15 03:36:05 2011] Mean tdetx,y = (3974.00, 2586.89)
[Sat Oct 15 03:36:05 2011] chipx,y range = (40.00-74.00, 868.00-904.00)
[Sat Oct 15 03:36:05 2011] Size of ../../acisf10329/products/events/fullrun_ccd7_acisf10329_pi14-548_pass1_cl_src5_bgd.evt.gz[events] = 10 counts
[Sat Oct 15 03:36:05 2011] ../../acisf10329/products/images/fullrun_ccd7_acisf10329_pi14-548_pass1_cl_src5_src.img and ../../acisf10329/products/images/fullrun_ccd7_acisf10329_pi14-548_pass1_cl_src5_bgd.img exist, delete to re-create
[Sat Oct 15 03:36:05 2011] ../../acisf10329/products/spectra/fullrun_ccd7_acisf10329_pi14-548_pass1_cl_src5_src.pi and ../../acisf10329/products/spectra/fullrun_ccd7_acisf10329_pi14-548_pass1_cl_src5_bgd.pi exist, delete to re-create
[Sat Oct 15 03:36:05 2011] Not generating rmf since there are only 44 counts
[Sat Oct 15 03:36:08 2011] ../../acisf10329/products/lightcurves/fullrun_ccd7_acisf10329_pi14-548_pass1_cl_src5_src.lc and ../../acisf10329/products/lightcurves/fullrun_ccd7_acisf10329_pi14-548_pass1_cl_src5_bgd.lc exist, delete to re-create
[Sat Oct 15 03:36:36 2011] 213.403
[Sat Oct 15 03:36:38 2011] Updating aperture counts using extracted products
[Sat Oct 15 03:36:38 2011] Error reading totcts from fullrun_ccd7_acisf10329_pi14-548_pass1_cl_src5_src.pi.gz
[Sat Oct 15 03:36:38 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 15 03:36:38 2011] Using photon index=1.80, rate=0.0044, arf fullrun_ccd7_acisf10329_pi14-548_pass1_cl_src5.arf
[Sat Oct 15 03:36:38 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 15 03:36:38 2011] Updating source flux to 3.7e-14
[Sat Oct 15 03:36:41 2011] Source 5 has fewer than 100.000000 counts, skipping spectral fitting