[Fri Sep 23 21:10:39 2011] Detection parameters:
  Position = (404.6, 908.6) = 9 26 43.90 2 33 19.7
  Extent = 0.7" x 0.5", rotation angle = 131 degrees
  Source counts = 90.2 +/- 9.5
  Background counts = 0.8
  Rate = 0.009 +/- 0.001

[Fri Sep 23 21:10:39 2011] Off-axis axis estimate = 2.97'
[Fri Sep 23 21:11:04 2011] Using EEF radius (= 0.57 ")to estimate initial spatial extent for simple fitting
[Fri Sep 23 21:11:04 2011] Initial guess for spatial extent in simple fitting = 0.57"
[Fri Sep 23 21:11:04 2011] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.808
[Fri Sep 23 21:11:04 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 0.57"
[Fri Sep 23 21:11:05 2011] fullrun_ccd6_acisf10326_pi14-548_cl_pass0_src2.ximg exists
[Fri Sep 23 21:11:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10326_pi14-548_cl_pass0_src2.csv
[Fri Sep 23 21:11:05 2011] fullrun_ccd6_acisf10326_pi14-548_cl_pass0_src2_1.ximg exists
[Fri Sep 23 21:11:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10326_pi14-548_cl_pass0_src2.csv
[Fri Sep 23 21:11:05 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf10326_pi14-548_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf10326_pi14-548_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 21:11:05 2011] fullrun_ccd6_acisf10326_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Fri Sep 23 21:11:05 2011] fullrun_ccd6_acisf10326_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Fri Sep 23 21:11:05 2011] Fit fullrun_ccd6_acisf10326_pi14-548_cl_pass0_tfrozen_src2 appears to have run properly
[Fri Sep 23 21:11:09 2011] Source 2 is offset by -5.074192 and 3.271946 pixels which is larger than
2 X fitted extent = 0.584134 x 0.584134, not incorporating fit results
[Fri Sep 23 21:11:09 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 21:11:09 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 21:11:09 2011] Assessing source extent using major
[Fri Sep 23 21:11:09 2011] Source does appear to be extended
[Fri Sep 23 21:11:09 2011] Computing asymmetry using major and minor axis, asym = 1.45
[Fri Sep 23 21:11:21 2011] Using EEF radius (= 0.57 ")to estimate initial spatial extent for simple fitting
[Fri Sep 23 21:11:21 2011] Initial guess for spatial extent in simple fitting = 0.57"
[Fri Sep 23 21:11:21 2011] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.808
[Fri Sep 23 21:11:21 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 0.57"
[Fri Sep 23 21:11:21 2011] fullrun_ccd6_acisf10326_pi14-548_cl_pass1_src2.ximg exists
[Fri Sep 23 21:11:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10326_pi14-548_cl_pass1_src2.csv
[Fri Sep 23 21:11:21 2011] fullrun_ccd6_acisf10326_pi14-548_cl_pass1_src2_1.ximg exists
[Fri Sep 23 21:11:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10326_pi14-548_cl_pass1_src2.csv
[Fri Sep 23 21:11:21 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf10326_pi14-548_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf10326_pi14-548_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 21:11:22 2011] fullrun_ccd6_acisf10326_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Fri Sep 23 21:11:22 2011] fullrun_ccd6_acisf10326_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Fri Sep 23 21:11:22 2011] Fit fullrun_ccd6_acisf10326_pi14-548_cl_pass1_tfrozen_src2 appears to have run properly
[Fri Sep 23 21:11:37 2011] Spatial fit model total counts = 93.519800, observed total counts = 91.000000
[Fri Sep 23 21:11:37 2011] Offset between fit and detection position for source 2 = 0.720530 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.720530 pixels
  Position = (405.1, 909.1) = 9 26 43.90 2 33 19.7
  Extent = 0.9 (0.8-0.9)", rotation angle = 0
  Source counts = 93.5 +/- 9.7
  Background counts = 0.0
  Rate = 0.009 +/- 0.001
[Fri Sep 23 21:11:37 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 21:11:37 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 21:11:37 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 21:11:37 2011] Source does appear to be extended
[Fri Sep 23 21:11:37 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 21:12:00 2011] Not overwriting source region fullrun_ccd6_acisf10326_pi14-548_pass1_cl_src2_src.reg
[Fri Sep 23 21:12:00 2011] Extracting stamp from image fullrun_ccd6_acisf10326_pi14-548_cl_sm2.00.img.gz, (366, 869) - (445, 949)
[Fri Sep 23 21:12:00 2011] Writing fullrun_ccd6_acisf10326_pi14-548_pass1_cl_src2.gif
[Fri Sep 23 21:12:09 2011] ../../acisf10326/products/events/fullrun_ccd6_acisf10326_pi14-548_pass1_cl_src2_src.evt and ../../acisf10326/products/events/fullrun_ccd6_acisf10326_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Fri Sep 23 21:12:10 2011] Size of ../../acisf10326/products/events/fullrun_ccd6_acisf10326_pi14-548_pass1_cl_src2_src.evt.gz[events] = 91 counts
[Fri Sep 23 21:12:10 2011] Mean chipx,y = (887.70, 394.37)
[Fri Sep 23 21:12:10 2011] Mean tdetx,y = (3762.70, 2096.37)
[Fri Sep 23 21:12:10 2011] chipx,y range = (869.00-905.00, 372.00-412.00)
[Fri Sep 23 21:12:10 2011] Size of ../../acisf10326/products/events/fullrun_ccd6_acisf10326_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 10 counts
[Fri Sep 23 21:12:10 2011] ../../acisf10326/products/images/fullrun_ccd6_acisf10326_pi14-548_pass1_cl_src2_src.img and ../../acisf10326/products/images/fullrun_ccd6_acisf10326_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Fri Sep 23 21:12:10 2011] ../../acisf10326/products/spectra/fullrun_ccd6_acisf10326_pi14-548_pass1_cl_src2_src.pi and ../../acisf10326/products/spectra/fullrun_ccd6_acisf10326_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Fri Sep 23 21:12:10 2011] Not generating rmf since there are only 93 counts
[Fri Sep 23 21:12:14 2011] ../../acisf10326/products/lightcurves/fullrun_ccd6_acisf10326_pi14-548_pass1_cl_src2_src.lc and ../../acisf10326/products/lightcurves/fullrun_ccd6_acisf10326_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Fri Sep 23 21:13:16 2011] 204.323
[Fri Sep 23 21:14:27 2011] Updating aperture counts using extracted products
[Fri Sep 23 21:14:27 2011] Error reading totcts from fullrun_ccd6_acisf10326_pi14-548_pass1_cl_src2_src.pi.gz
[Fri Sep 23 21:14:28 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 23 21:14:28 2011] Using photon index=1.80, rate=0.00932, arf fullrun_ccd6_acisf10326_pi14-548_pass1_cl_src2.arf
[Fri Sep 23 21:14:28 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 23 21:14:28 2011] Updating source flux to 1e-13
[Fri Sep 23 21:14:31 2011] Flag b found in src. 2 procflags, skipping spectral fitting
[Fri Sep 23 21:14:31 2011] Source 2 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Sep 23 21:14:32 2011] acisf10326/analysis//spectral/fullrun_ccd6_acisf10326_pi14-548_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete