[Fri Oct 28 01:30:55 2011] Detection parameters:
  Position = (942.4, 380.8) = 2 15 20.08 -13 0 59.1
  Extent = 1.1" x 0.7", rotation angle = 128 degrees
  Source counts = 108.3 +/- 10.6
  Background counts = 4.7
  Rate = 0.005 +/- 0.0005

[Fri Oct 28 01:30:56 2011] Off-axis axis estimate = 4.77'
[Fri Oct 28 01:31:37 2011] Using EEF radius (= 1.09 ")to estimate initial spatial extent for simple fitting
[Fri Oct 28 01:31:37 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 28 01:31:37 2011] Initial guess for spatial extent in simple fitting = 1.09"
[Fri Oct 28 01:31:37 2011] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.014
[Fri Oct 28 01:31:37 2011] Giving source the simple spatial ID 4 for pass 0, mean size = 1.09"
[Fri Oct 28 01:31:38 2011] fullrun_ccd7_acisf10320_pi14-548_cl_pass0_src4.ximg exists
[Fri Oct 28 01:31:38 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd7_acisf10320_pi14-548_cl_pass0_src4.csv
[Fri Oct 28 01:31:38 2011] fullrun_ccd7_acisf10320_pi14-548_cl_pass0_src4_1.ximg exists
[Fri Oct 28 01:31:38 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd7_acisf10320_pi14-548_cl_pass0_src4.csv
[Fri Oct 28 01:31:38 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10320_pi14-548_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10320_pi14-548_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 01:31:38 2011] fullrun_ccd7_acisf10320_pi14-548_cl_pass0_tfrozen_src4.ximg exists
[Fri Oct 28 01:31:38 2011] fullrun_ccd7_acisf10320_pi14-548_cl_pass0_tfrozen_src4_1.ximg exists
[Fri Oct 28 01:31:38 2011] Fit fullrun_ccd7_acisf10320_pi14-548_cl_pass0_tfrozen_src4 appears to have run properly
[Fri Oct 28 01:31:46 2011] Spatial fit model total counts = 110.294000, observed total counts = 114.000000
[Fri Oct 28 01:31:46 2011] Offset between fit and detection position for source 4 = 1.005313 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 1.005313 pixels
  Position = (942.6, 381.8) = 2 15 20.09 -13 0 58.8
  Extent = 1.2 (1.0-1.4)", rotation angle = 0
  Source counts = 110.2 +/- 10.5
  Background counts = 0.0
  Rate = 0.006 +/- 0.0005
[Fri Oct 28 01:31:46 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 01:31:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 01:31:46 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 01:31:46 2011] Source does appear to be extended
[Fri Oct 28 01:31:46 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 01:32:04 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 28 01:32:04 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 28 01:32:04 2011] Initial guess for spatial extent in simple fitting = 1.20"
[Fri Oct 28 01:32:04 2011] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.041
[Fri Oct 28 01:32:04 2011] Giving source the simple spatial ID 4 for pass 1, mean size = 1.20"
[Fri Oct 28 01:32:05 2011] fullrun_ccd7_acisf10320_pi14-548_cl_pass1_src4.ximg exists
[Fri Oct 28 01:32:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10320_pi14-548_cl_pass1_src4.csv
[Fri Oct 28 01:32:05 2011] fullrun_ccd7_acisf10320_pi14-548_cl_pass1_src4_1.ximg exists
[Fri Oct 28 01:32:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10320_pi14-548_cl_pass1_src4.csv
[Fri Oct 28 01:32:05 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10320_pi14-548_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10320_pi14-548_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 01:32:05 2011] fullrun_ccd7_acisf10320_pi14-548_cl_pass1_tfrozen_src4.ximg exists
[Fri Oct 28 01:32:06 2011] fullrun_ccd7_acisf10320_pi14-548_cl_pass1_tfrozen_src4_1.ximg exists
[Fri Oct 28 01:32:06 2011] Fit fullrun_ccd7_acisf10320_pi14-548_cl_pass1_tfrozen_src4 appears to have run properly
[Fri Oct 28 01:32:14 2011] Spatial fit model total counts = 109.401000, observed total counts = 112.000000
[Fri Oct 28 01:32:14 2011] Offset between fit and detection position for source 4 = 0.101592 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.101592 pixels
  Position = (942.7, 381.8) = 2 15 20.08 -13 0 58.8
  Extent = 1.2 (1.1-1.3)", rotation angle = 0
  Source counts = 108.9 +/- 10.4
  Background counts = 0.0
  Rate = 0.005 +/- 0.0005
[Fri Oct 28 01:32:14 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 01:32:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 01:32:14 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 01:32:14 2011] Source does appear to be extended
[Fri Oct 28 01:32:14 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 01:33:15 2011] Not overwriting source region fullrun_ccd7_acisf10320_pi14-548_pass1_cl_src4_src.reg
[Fri Oct 28 01:33:15 2011] Extracting stamp from image fullrun_ccd7_acisf10320_pi14-548_cl_sm2.00.img.gz, (889, 328) - (997, 436)
[Fri Oct 28 01:33:15 2011] Writing fullrun_ccd7_acisf10320_pi14-548_pass1_cl_src4.gif
[Fri Oct 28 01:33:27 2011] ../../acisf10320/products/events/fullrun_ccd7_acisf10320_pi14-548_pass1_cl_src4_src.evt and ../../acisf10320/products/events/fullrun_ccd7_acisf10320_pi14-548_pass1_cl_src4_bgd.evt exist, delete to re-create
[Fri Oct 28 01:33:27 2011] Size of ../../acisf10320/products/events/fullrun_ccd7_acisf10320_pi14-548_pass1_cl_src4_src.evt.gz[events] = 113 counts
[Fri Oct 28 01:33:27 2011] Mean chipx,y = (606.53, 908.93)
[Fri Oct 28 01:33:27 2011] Mean tdetx,y = (4523.53, 2610.93)
[Fri Oct 28 01:33:27 2011] chipx,y range = (589.00-627.00, 890.00-930.00)
[Fri Oct 28 01:33:27 2011] Size of ../../acisf10320/products/events/fullrun_ccd7_acisf10320_pi14-548_pass1_cl_src4_bgd.evt.gz[events] = 47 counts
[Fri Oct 28 01:33:27 2011] ../../acisf10320/products/images/fullrun_ccd7_acisf10320_pi14-548_pass1_cl_src4_src.img and ../../acisf10320/products/images/fullrun_ccd7_acisf10320_pi14-548_pass1_cl_src4_bgd.img exist, delete to re-create
[Fri Oct 28 01:33:27 2011] ../../acisf10320/products/spectra/fullrun_ccd7_acisf10320_pi14-548_pass1_cl_src4_src.pi and ../../acisf10320/products/spectra/fullrun_ccd7_acisf10320_pi14-548_pass1_cl_src4_bgd.pi exist, delete to re-create
[Fri Oct 28 01:33:29 2011] ../../acisf10320/products/lightcurves/fullrun_ccd7_acisf10320_pi14-548_pass1_cl_src4_src.lc and ../../acisf10320/products/lightcurves/fullrun_ccd7_acisf10320_pi14-548_pass1_cl_src4_bgd.lc exist, delete to re-create
[Fri Oct 28 01:34:38 2011] Keeping rmf generated by specextract
[Fri Oct 28 01:34:38 2011] 213.635
[Fri Oct 28 01:34:41 2011] Updating aperture counts using extracted products
[Fri Oct 28 01:34:41 2011] Error reading totcts from fullrun_ccd7_acisf10320_pi14-548_pass1_cl_src4_src.pi.gz
[Fri Oct 28 01:34:41 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 28 01:34:41 2011] Using photon index=1.80, rate=0.00548, arf fullrun_ccd7_acisf10320_pi14-548_pass1_cl_src4.arf
[Fri Oct 28 01:34:41 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 28 01:34:41 2011] Updating source flux to 4.6e-14