[Fri Oct 28 01:30:56 2011] Detection parameters:
  Position = (621.2, 162.6) = 2 15 30.89 -13 2 46.5
  Extent = 0.7" x 0.6", rotation angle = 96 degrees
  Source counts = 10.2 +/- 3.5
  Background counts = 1.8
  Rate = 0.0005 +/- 0.0002

[Fri Oct 28 01:30:56 2011] Off-axis axis estimate = 3.81'
[Fri Oct 28 01:31:37 2011] Using EEF radius (= 0.77 ")to estimate initial spatial extent for simple fitting
[Fri Oct 28 01:31:37 2011] Initial guess for spatial extent in simple fitting = 0.77"
[Fri Oct 28 01:31:37 2011] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.931
[Fri Oct 28 01:31:37 2011] Giving source the simple spatial ID 20 for pass 0, mean size = 0.77"
[Fri Oct 28 01:31:38 2011] fullrun_ccd7_acisf10320_pi14-548_cl_pass0_src20.ximg exists
[Fri Oct 28 01:31:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10320_pi14-548_cl_pass0_src20.csv
[Fri Oct 28 01:31:38 2011] fullrun_ccd7_acisf10320_pi14-548_cl_pass0_src20_1.ximg exists
[Fri Oct 28 01:31:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10320_pi14-548_cl_pass0_src20.csv
[Fri Oct 28 01:31:38 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10320_pi14-548_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10320_pi14-548_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 01:31:39 2011] fullrun_ccd7_acisf10320_pi14-548_cl_pass0_tfrozen_src20.ximg exists
[Fri Oct 28 01:31:39 2011] fullrun_ccd7_acisf10320_pi14-548_cl_pass0_tfrozen_src20_1.ximg exists
[Fri Oct 28 01:31:39 2011] Fit fullrun_ccd7_acisf10320_pi14-548_cl_pass0_tfrozen_src20 appears to have run properly
[Fri Oct 28 01:31:46 2011] Spatial fit model total counts = 12.426600, observed total counts = 13.000000
[Fri Oct 28 01:31:46 2011] Offset between fit and detection position for source 21 = 0.538291 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 0.538291 pixels
  Position = (621.6, 162.9) = 2 15 30.89 -13 2 46.5
  Extent = 0.9 (0.6-1.3)", rotation angle = 0
  Source counts = 12.9 +/- 3.6
  Background counts = 0.0
  Rate = 0.0007 +/- 0.0002
[Fri Oct 28 01:31:46 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 01:31:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 01:31:46 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 01:31:46 2011] Source does appear to be extended
[Fri Oct 28 01:31:46 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 01:32:04 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 28 01:32:04 2011] Initial guess for spatial extent in simple fitting = 0.88"
[Fri Oct 28 01:32:04 2011] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.959
[Fri Oct 28 01:32:04 2011] Giving source the simple spatial ID 20 for pass 1, mean size = 0.88"
[Fri Oct 28 01:32:05 2011] fullrun_ccd7_acisf10320_pi14-548_cl_pass1_src20.ximg exists
[Fri Oct 28 01:32:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10320_pi14-548_cl_pass1_src20.csv
[Fri Oct 28 01:32:05 2011] fullrun_ccd7_acisf10320_pi14-548_cl_pass1_src20_1.ximg exists
[Fri Oct 28 01:32:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10320_pi14-548_cl_pass1_src20.csv
[Fri Oct 28 01:32:05 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10320_pi14-548_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10320_pi14-548_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 01:32:06 2011] fullrun_ccd7_acisf10320_pi14-548_cl_pass1_tfrozen_src20.ximg exists
[Fri Oct 28 01:32:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10320_pi14-548_cl_pass1_tfrozen_src20.csv
[Fri Oct 28 01:32:06 2011] fullrun_ccd7_acisf10320_pi14-548_cl_pass1_tfrozen_src20_1.ximg exists
[Fri Oct 28 01:32:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10320_pi14-548_cl_pass1_tfrozen_src20.csv
[Fri Oct 28 01:32:06 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10320_pi14-548_cl_pass1_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10320_pi14-548_cl_pass1_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 01:32:14 2011] Spatial fit model total counts = 11.012900, observed total counts = 15.000000
[Fri Oct 28 01:32:14 2011] Poor agreement between spatial fit and data for source 21
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Oct 28 01:32:14 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 01:32:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 01:32:14 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 01:32:14 2011] Source does appear to be extended
[Fri Oct 28 01:32:14 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 01:33:16 2011] Not overwriting source region fullrun_ccd7_acisf10320_pi14-548_pass1_cl_src21_src.reg
[Fri Oct 28 01:33:16 2011] Extracting stamp from image fullrun_ccd7_acisf10320_pi14-548_cl_sm2.00.img.gz, (581, 123) - (662, 203)
[Fri Oct 28 01:33:16 2011] Writing fullrun_ccd7_acisf10320_pi14-548_pass1_cl_src21.gif
[Fri Oct 28 01:34:14 2011] ../../acisf10320/products/events/fullrun_ccd7_acisf10320_pi14-548_pass1_cl_src21_src.evt and ../../acisf10320/products/events/fullrun_ccd7_acisf10320_pi14-548_pass1_cl_src21_bgd.evt exist, delete to re-create
[Fri Oct 28 01:34:14 2011] Size of ../../acisf10320/products/events/fullrun_ccd7_acisf10320_pi14-548_pass1_cl_src21_src.evt.gz[events] = 13 counts
[Fri Oct 28 01:34:14 2011] Mean chipx,y = (227.92, 961.46)
[Fri Oct 28 01:34:14 2011] Mean tdetx,y = (4144.92, 2663.46)
[Fri Oct 28 01:34:14 2011] chipx,y range = (203.00-244.00, 946.00-980.00)
[Fri Oct 28 01:34:14 2011] Size of ../../acisf10320/products/events/fullrun_ccd7_acisf10320_pi14-548_pass1_cl_src21_bgd.evt.gz[events] = 38 counts
[Fri Oct 28 01:34:14 2011] ../../acisf10320/products/images/fullrun_ccd7_acisf10320_pi14-548_pass1_cl_src21_src.img and ../../acisf10320/products/images/fullrun_ccd7_acisf10320_pi14-548_pass1_cl_src21_bgd.img exist, delete to re-create
[Fri Oct 28 01:34:14 2011] ../../acisf10320/products/spectra/fullrun_ccd7_acisf10320_pi14-548_pass1_cl_src21_src.pi and ../../acisf10320/products/spectra/fullrun_ccd7_acisf10320_pi14-548_pass1_cl_src21_bgd.pi exist, delete to re-create
[Fri Oct 28 01:34:14 2011] Not generating rmf since there are only 12 counts
[Fri Oct 28 01:34:16 2011] ../../acisf10320/products/lightcurves/fullrun_ccd7_acisf10320_pi14-548_pass1_cl_src21_src.lc and ../../acisf10320/products/lightcurves/fullrun_ccd7_acisf10320_pi14-548_pass1_cl_src21_bgd.lc exist, delete to re-create
[Fri Oct 28 01:34:38 2011] 219.773
[Fri Oct 28 01:34:41 2011] Updating aperture counts using extracted products
[Fri Oct 28 01:34:41 2011] Error reading totcts from fullrun_ccd7_acisf10320_pi14-548_pass1_cl_src21_src.pi.gz
[Fri Oct 28 01:34:41 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 28 01:34:41 2011] Using photon index=1.80, rate=0.00065, arf fullrun_ccd7_acisf10320_pi14-548_pass1_cl_src21.arf
[Fri Oct 28 01:34:41 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 28 01:34:41 2011] Updating source flux to 5.6e-15
[Fri Oct 28 01:34:56 2011] Flag p found in src. 21 procflags, skipping spectral fitting
[Fri Oct 28 01:34:56 2011] Source 21 has fewer than 100.000000 counts, skipping spectral fitting