[Fri Oct 28 01:30:55 2011] Detection parameters:
  Position = (685.5, 802.2) = 2 15 28.73 -12 57 31.8
  Extent = 0.6" x 0.5", rotation angle = 177 degrees
  Source counts = 59.0 +/- 7.8
  Background counts = 2.0
  Rate = 0.003 +/- 0.0004

[Fri Oct 28 01:30:56 2011] Off-axis axis estimate = 3.11'
[Fri Oct 28 01:31:37 2011] Using EEF radius (= 0.60 ")to estimate initial spatial extent for simple fitting
[Fri Oct 28 01:31:37 2011] Initial guess for spatial extent in simple fitting = 0.60"
[Fri Oct 28 01:31:37 2011] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.010
[Fri Oct 28 01:31:37 2011] Giving source the simple spatial ID 6 for pass 0, mean size = 0.60"
[Fri Oct 28 01:31:38 2011] fullrun_ccd7_acisf10320_pi14-548_cl_pass0_src6.ximg exists
[Fri Oct 28 01:31:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10320_pi14-548_cl_pass0_src6.csv
[Fri Oct 28 01:31:38 2011] fullrun_ccd7_acisf10320_pi14-548_cl_pass0_src6_1.ximg exists
[Fri Oct 28 01:31:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10320_pi14-548_cl_pass0_src6.csv
[Fri Oct 28 01:31:38 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10320_pi14-548_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10320_pi14-548_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 01:31:38 2011] fullrun_ccd7_acisf10320_pi14-548_cl_pass0_tfrozen_src6.ximg exists
[Fri Oct 28 01:31:38 2011] fullrun_ccd7_acisf10320_pi14-548_cl_pass0_tfrozen_src6_1.ximg exists
[Fri Oct 28 01:31:38 2011] Fit fullrun_ccd7_acisf10320_pi14-548_cl_pass0_tfrozen_src6 appears to have run properly
[Fri Oct 28 01:31:46 2011] Spatial fit model total counts = 65.196800, observed total counts = 65.000000
[Fri Oct 28 01:31:46 2011] Offset between fit and detection position for source 11 = 0.807021 pixels
[Fri Oct 28 01:31:46 2011] 65.671680 total counts/ 9.142180 bgd. counts: snr = 18.696067
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.807021 pixels
  Position = (686.1, 802.7) = 2 15 28.72 -12 57 31.8
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 56.5 +/- 8.1
  Background counts = 9.1
  Rate = 0.003 +/- 0.0004
[Fri Oct 28 01:31:46 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 01:31:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 01:31:46 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 01:31:46 2011] Source does appear to be extended
[Fri Oct 28 01:31:46 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 01:32:04 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 28 01:32:04 2011] Initial guess for spatial extent in simple fitting = 0.57"
[Fri Oct 28 01:32:04 2011] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.103
[Fri Oct 28 01:32:04 2011] Giving source the simple spatial ID 6 for pass 1, mean size = 0.57"
[Fri Oct 28 01:32:05 2011] fullrun_ccd7_acisf10320_pi14-548_cl_pass1_src6.ximg exists
[Fri Oct 28 01:32:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10320_pi14-548_cl_pass1_src6.csv
[Fri Oct 28 01:32:05 2011] fullrun_ccd7_acisf10320_pi14-548_cl_pass1_src6_1.ximg exists
[Fri Oct 28 01:32:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10320_pi14-548_cl_pass1_src6.csv
[Fri Oct 28 01:32:05 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10320_pi14-548_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10320_pi14-548_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 01:32:06 2011] fullrun_ccd7_acisf10320_pi14-548_cl_pass1_tfrozen_src6.ximg exists
[Fri Oct 28 01:32:06 2011] fullrun_ccd7_acisf10320_pi14-548_cl_pass1_tfrozen_src6_1.ximg exists
[Fri Oct 28 01:32:06 2011] Fit fullrun_ccd7_acisf10320_pi14-548_cl_pass1_tfrozen_src6 appears to have run properly
[Fri Oct 28 01:32:14 2011] Spatial fit model total counts = 65.891900, observed total counts = 66.000000
[Fri Oct 28 01:32:14 2011] Offset between fit and detection position for source 11 = 0.015363 pixels
[Fri Oct 28 01:32:14 2011] 65.765680 total counts/ 9.709980 bgd. counts: snr = 17.989149
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.015363 pixels
  Position = (686.1, 802.7) = 2 15 28.72 -12 57 31.8
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 56.1 +/- 8.1
  Background counts = 9.7
  Rate = 0.003 +/- 0.0004
[Fri Oct 28 01:32:14 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 01:32:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 01:32:14 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 01:32:14 2011] Source does appear to be extended
[Fri Oct 28 01:32:14 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 01:33:16 2011] Not overwriting source region fullrun_ccd7_acisf10320_pi14-548_pass1_cl_src11_src.reg
[Fri Oct 28 01:33:16 2011] Extracting stamp from image fullrun_ccd7_acisf10320_pi14-548_cl_sm2.00.img.gz, (660, 777) - (712, 828)
[Fri Oct 28 01:33:16 2011] Writing fullrun_ccd7_acisf10320_pi14-548_pass1_cl_src11.gif
[Fri Oct 28 01:33:32 2011] ../../acisf10320/products/events/fullrun_ccd7_acisf10320_pi14-548_pass1_cl_src11_src.evt and ../../acisf10320/products/events/fullrun_ccd7_acisf10320_pi14-548_pass1_cl_src11_bgd.evt exist, delete to re-create
[Fri Oct 28 01:33:32 2011] Size of ../../acisf10320/products/events/fullrun_ccd7_acisf10320_pi14-548_pass1_cl_src11_src.evt.gz[events] = 60 counts
[Fri Oct 28 01:33:32 2011] Mean chipx,y = (562.30, 415.12)
[Fri Oct 28 01:33:32 2011] Mean tdetx,y = (4479.30, 2117.12)
[Fri Oct 28 01:33:32 2011] chipx,y range = (547.00-582.00, 400.00-437.00)
[Fri Oct 28 01:33:32 2011] Size of ../../acisf10320/products/events/fullrun_ccd7_acisf10320_pi14-548_pass1_cl_src11_bgd.evt.gz[events] = 9 counts
[Fri Oct 28 01:33:32 2011] ../../acisf10320/products/images/fullrun_ccd7_acisf10320_pi14-548_pass1_cl_src11_src.img and ../../acisf10320/products/images/fullrun_ccd7_acisf10320_pi14-548_pass1_cl_src11_bgd.img exist, delete to re-create
[Fri Oct 28 01:33:32 2011] ../../acisf10320/products/spectra/fullrun_ccd7_acisf10320_pi14-548_pass1_cl_src11_src.pi and ../../acisf10320/products/spectra/fullrun_ccd7_acisf10320_pi14-548_pass1_cl_src11_bgd.pi exist, delete to re-create
[Fri Oct 28 01:33:32 2011] Not generating rmf since there are only 56 counts
[Fri Oct 28 01:33:35 2011] ../../acisf10320/products/lightcurves/fullrun_ccd7_acisf10320_pi14-548_pass1_cl_src11_src.lc and ../../acisf10320/products/lightcurves/fullrun_ccd7_acisf10320_pi14-548_pass1_cl_src11_bgd.lc exist, delete to re-create
[Fri Oct 28 01:34:38 2011] 228.007
[Fri Oct 28 01:34:41 2011] Updating aperture counts using extracted products
[Fri Oct 28 01:34:41 2011] Error reading totcts from fullrun_ccd7_acisf10320_pi14-548_pass1_cl_src11_src.pi.gz
[Fri Oct 28 01:34:41 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 28 01:34:41 2011] Using photon index=1.80, rate=0.00282, arf fullrun_ccd7_acisf10320_pi14-548_pass1_cl_src11.arf
[Fri Oct 28 01:34:41 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 28 01:34:41 2011] Updating source flux to 2.1e-14
[Fri Oct 28 01:34:56 2011] Source 11 has fewer than 100.000000 counts, skipping spectral fitting