[Fri Oct 28 01:30:53 2011] Detection parameters:
  Position = (526.5, 852.7) = 2 15 7.71 -13 6 21.3
  Extent = 3.6" x 3.2", rotation angle = 133 degrees
  Source counts = 129.2 +/- 12.4
  Background counts = 24.8
  Rate = 0.006 +/- 0.0006

[Fri Oct 28 01:30:53 2011] Off-axis axis estimate = 10.21'
[Fri Oct 28 01:31:35 2011] Using EEF radius (= 4.62 ")to estimate initial spatial extent for simple fitting
[Fri Oct 28 01:31:35 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 28 01:31:35 2011] Initial guess for spatial extent in simple fitting = 4.62"
[Fri Oct 28 01:31:35 2011] source mask rpix=9.4, npix_max = 391, mask sum = 380, frac = 0.971
[Fri Oct 28 01:31:35 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 4.62"
[Fri Oct 28 01:31:35 2011] fullrun_ccd3_acisf10320_pi14-548_cl_pass0_src1.ximg exists
[Fri Oct 28 01:31:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10320_pi14-548_cl_pass0_src1.csv
[Fri Oct 28 01:31:35 2011] fullrun_ccd3_acisf10320_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Oct 28 01:31:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10320_pi14-548_cl_pass0_src1.csv
[Fri Oct 28 01:31:35 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10320_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10320_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 01:31:35 2011] fullrun_ccd3_acisf10320_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Oct 28 01:31:35 2011] fullrun_ccd3_acisf10320_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Oct 28 01:31:35 2011] Fit fullrun_ccd3_acisf10320_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Oct 28 01:31:42 2011] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 53.654158 pixels away
[Fri Oct 28 01:31:42 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 01:31:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 01:31:42 2011] Assessing source extent using major
[Fri Oct 28 01:31:42 2011] Source does appear to be extended
[Fri Oct 28 01:31:42 2011] Computing asymmetry using major and minor axis, asym = 1.15
[Fri Oct 28 01:32:01 2011] Using EEF radius (= 4.62 ")to estimate initial spatial extent for simple fitting
[Fri Oct 28 01:32:01 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 28 01:32:01 2011] Initial guess for spatial extent in simple fitting = 4.62"
[Fri Oct 28 01:32:01 2011] source mask rpix=9.4, npix_max = 391, mask sum = 380, frac = 0.971
[Fri Oct 28 01:32:01 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 4.62"
[Fri Oct 28 01:32:02 2011] fullrun_ccd3_acisf10320_pi14-548_cl_pass1_src1.ximg exists
[Fri Oct 28 01:32:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10320_pi14-548_cl_pass1_src1.csv
[Fri Oct 28 01:32:02 2011] fullrun_ccd3_acisf10320_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Oct 28 01:32:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10320_pi14-548_cl_pass1_src1.csv
[Fri Oct 28 01:32:02 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10320_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10320_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 01:32:02 2011] fullrun_ccd3_acisf10320_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Oct 28 01:32:02 2011] fullrun_ccd3_acisf10320_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Oct 28 01:32:02 2011] Fit fullrun_ccd3_acisf10320_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Oct 28 01:32:10 2011] Spatial fit model total counts = 178.327000, observed total counts = 178.000000
[Fri Oct 28 01:32:10 2011] Offset between fit and detection position for source 5 = 0.953433 pixels
[Fri Oct 28 01:32:10 2011] 177.879200 total counts/ 45.044200 bgd. counts: snr = 19.792155
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.953433 pixels
  Position = (526.9, 853.6) = 2 15 7.71 -13 6 21.1
  Extent = 3.9 (3.4-4.5)", rotation angle = 0
  Source counts = 132.8 +/- 13.3
  Background counts = 45.0
  Rate = 0.007 +/- 0.0007
[Fri Oct 28 01:32:10 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 01:32:10 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 01:32:10 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 01:32:10 2011] Source does appear to be extended
[Fri Oct 28 01:32:10 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 01:32:38 2011] Not overwriting source region fullrun_ccd3_acisf10320_pi14-548_pass1_cl_src5_src.reg
[Fri Oct 28 01:32:38 2011] Extracting stamp from image fullrun_ccd3_acisf10320_pi14-548_cl_sm2.00.img.gz, (350, 677) - (704, 1030)
[Fri Oct 28 01:32:38 2011] Writing fullrun_ccd3_acisf10320_pi14-548_pass1_cl_src5.gif
[Fri Oct 28 01:32:38 2011] ../../acisf10320/products/events/fullrun_ccd3_acisf10320_pi14-548_pass1_cl_src5_src.evt and ../../acisf10320/products/events/fullrun_ccd3_acisf10320_pi14-548_pass1_cl_src5_bgd.evt exist, delete to re-create
[Fri Oct 28 01:32:38 2011] Size of ../../acisf10320/products/events/fullrun_ccd3_acisf10320_pi14-548_pass1_cl_src5_src.evt.gz[events] = 156 counts
[Fri Oct 28 01:32:38 2011] Mean chipx,y = (301.21, 567.37)
[Fri Oct 28 01:32:38 2011] Mean tdetx,y = (4564.63, 3362.21)
[Fri Oct 28 01:32:38 2011] chipx,y range = (260.00-339.00, 535.00-603.00)
[Fri Oct 28 01:32:38 2011] Size of ../../acisf10320/products/events/fullrun_ccd3_acisf10320_pi14-548_pass1_cl_src5_bgd.evt.gz[events] = 183 counts
[Fri Oct 28 01:32:38 2011] ../../acisf10320/products/images/fullrun_ccd3_acisf10320_pi14-548_pass1_cl_src5_src.img and ../../acisf10320/products/images/fullrun_ccd3_acisf10320_pi14-548_pass1_cl_src5_bgd.img exist, delete to re-create
[Fri Oct 28 01:32:38 2011] ../../acisf10320/products/spectra/fullrun_ccd3_acisf10320_pi14-548_pass1_cl_src5_src.pi and ../../acisf10320/products/spectra/fullrun_ccd3_acisf10320_pi14-548_pass1_cl_src5_bgd.pi exist, delete to re-create
[Fri Oct 28 01:32:41 2011] ../../acisf10320/products/lightcurves/fullrun_ccd3_acisf10320_pi14-548_pass1_cl_src5_src.lc and ../../acisf10320/products/lightcurves/fullrun_ccd3_acisf10320_pi14-548_pass1_cl_src5_bgd.lc exist, delete to re-create
[Fri Oct 28 01:32:54 2011] Keeping rmf generated by specextract
[Fri Oct 28 01:32:54 2011] 163.65
[Fri Oct 28 01:34:41 2011] Updating aperture counts using extracted products
[Fri Oct 28 01:34:41 2011] Error reading totcts from fullrun_ccd3_acisf10320_pi14-548_pass1_cl_src5_src.pi.gz
[Fri Oct 28 01:34:41 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 28 01:34:41 2011] Using photon index=1.80, rate=0.00668, arf fullrun_ccd3_acisf10320_pi14-548_pass1_cl_src5.arf
[Fri Oct 28 01:34:41 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 28 01:34:41 2011] Updating source flux to 9.4e-14
[Fri Oct 28 01:34:51 2011] Reading fit data from acisf10320/analysis//spectral/fullrun_ccd3_acisf10320_pi14-548_pass1_cl_src5_pl.csv
[Fri Oct 28 01:34:51 2011] Spectral fit parameter nH value = 2.74952e+16
[Fri Oct 28 01:34:51 2011] Spectral fit parameter PhoIndex value = 1.59738
[Fri Oct 28 01:34:51 2011] Failed to get F(0.3-8.0) from acisf10320/analysis//spectral/fullrun_ccd3_acisf10320_pi14-548_pass1_cl_src5_pl.csv, possibly due to different flux energy range selected
[Fri Oct 28 01:34:51 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 28 01:34:51 2011] Using Nh = 2.7e+16, photon index=1.60, rate=0.00668, arf fullrun_ccd3_acisf10320_pi14-548_pass1_cl_src5.arf
[Fri Oct 28 01:34:51 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 28 01:34:51 2011] Updating source flux to 1e-13