[Fri Oct 28 01:30:52 2011] Detection parameters:
  Position = (598.5, 1008.0) = 2 15 5.28 -13 5 4.9
  Extent = 2.3" x 1.0", rotation angle = 132 degrees
  Source counts = 25.9 +/- 6.0
  Background counts = 10.1
  Rate = 0.001 +/- 0.0003

[Fri Oct 28 01:30:53 2011] Off-axis axis estimate = 9.88'
[Fri Oct 28 01:31:35 2011] Using EEF radius (= 4.32 ")to estimate initial spatial extent for simple fitting
[Fri Oct 28 01:31:35 2011] Initial guess for spatial extent in simple fitting = 4.32"
[Fri Oct 28 01:31:35 2011] source mask rpix=8.8, npix_max = 344, mask sum = 342, frac = 0.993
[Fri Oct 28 01:31:35 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 4.32"
[Fri Oct 28 01:31:35 2011] fullrun_ccd3_acisf10320_pi14-548_cl_pass0_src3.ximg exists
[Fri Oct 28 01:31:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10320_pi14-548_cl_pass0_src3.csv
[Fri Oct 28 01:31:35 2011] fullrun_ccd3_acisf10320_pi14-548_cl_pass0_src3_1.ximg exists
[Fri Oct 28 01:31:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10320_pi14-548_cl_pass0_src3.csv
[Fri Oct 28 01:31:35 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10320_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10320_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 01:31:35 2011] fullrun_ccd3_acisf10320_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Fri Oct 28 01:31:35 2011] fullrun_ccd3_acisf10320_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Oct 28 01:31:35 2011] Fit fullrun_ccd3_acisf10320_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Oct 28 01:31:42 2011] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 50.062550 pixels away
[Fri Oct 28 01:31:42 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 01:31:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 01:31:42 2011] Assessing source extent using major
[Fri Oct 28 01:31:42 2011] Source does appear to be extended
[Fri Oct 28 01:31:42 2011] Computing asymmetry using major and minor axis, asym = 2.38
[Fri Oct 28 01:31:42 2011] Source is asymmetric
[Fri Oct 28 01:32:01 2011] Using EEF radius (= 4.32 ")to estimate initial spatial extent for simple fitting
[Fri Oct 28 01:32:01 2011] Initial guess for spatial extent in simple fitting = 4.32"
[Fri Oct 28 01:32:01 2011] source mask rpix=8.8, npix_max = 344, mask sum = 342, frac = 0.993
[Fri Oct 28 01:32:01 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 4.32"
[Fri Oct 28 01:32:02 2011] fullrun_ccd3_acisf10320_pi14-548_cl_pass1_src3.ximg exists
[Fri Oct 28 01:32:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10320_pi14-548_cl_pass1_src3.csv
[Fri Oct 28 01:32:02 2011] fullrun_ccd3_acisf10320_pi14-548_cl_pass1_src3_1.ximg exists
[Fri Oct 28 01:32:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10320_pi14-548_cl_pass1_src3.csv
[Fri Oct 28 01:32:02 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10320_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10320_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 01:32:02 2011] fullrun_ccd3_acisf10320_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Fri Oct 28 01:32:02 2011] fullrun_ccd3_acisf10320_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Oct 28 01:32:02 2011] Fit fullrun_ccd3_acisf10320_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Oct 28 01:32:10 2011] Spatial fit model total counts = 54.315200, observed total counts = 54.000000
[Fri Oct 28 01:32:10 2011] Offset between fit and detection position for source 3 = 1.830048 pixels
[Fri Oct 28 01:32:10 2011] 54.281500 total counts/ 38.635600 bgd. counts: snr = 2.517136
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 1.830048 pixels
  Position = (597.7, 1009.6) = 2 15 5.33 -13 5 4.4
  Extent = 2.0 (1.1-3.8)", rotation angle = 0
  Source counts = 15.6 +/- 7.4
  Background counts = 38.6
  Rate = 0.0008 +/- 0.0004
[Fri Oct 28 01:32:10 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 01:32:10 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 01:32:10 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 01:32:10 2011] Source does appear to be extended
[Fri Oct 28 01:32:10 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 01:32:38 2011] Not overwriting source region fullrun_ccd3_acisf10320_pi14-548_pass1_cl_src3_src.reg
[Fri Oct 28 01:32:38 2011] Extracting stamp from image fullrun_ccd3_acisf10320_pi14-548_cl_sm2.00.img.gz, (506, 918) - (689, 1101)
[Fri Oct 28 01:32:38 2011] Writing fullrun_ccd3_acisf10320_pi14-548_pass1_cl_src3.gif
[Fri Oct 28 01:32:44 2011] ../../acisf10320/products/events/fullrun_ccd3_acisf10320_pi14-548_pass1_cl_src3_src.evt and ../../acisf10320/products/events/fullrun_ccd3_acisf10320_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Fri Oct 28 01:32:44 2011] Size of ../../acisf10320/products/events/fullrun_ccd3_acisf10320_pi14-548_pass1_cl_src3_src.evt.gz[events] = 28 counts
[Fri Oct 28 01:32:44 2011] Mean chipx,y = (190.86, 437.32)
[Fri Oct 28 01:32:44 2011] Mean tdetx,y = (4694.68, 3251.86)
[Fri Oct 28 01:32:44 2011] chipx,y range = (170.00-217.00, 414.00-456.00)
[Fri Oct 28 01:32:44 2011] Size of ../../acisf10320/products/events/fullrun_ccd3_acisf10320_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 63 counts
[Fri Oct 28 01:32:44 2011] ../../acisf10320/products/images/fullrun_ccd3_acisf10320_pi14-548_pass1_cl_src3_src.img and ../../acisf10320/products/images/fullrun_ccd3_acisf10320_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Fri Oct 28 01:32:44 2011] ../../acisf10320/products/spectra/fullrun_ccd3_acisf10320_pi14-548_pass1_cl_src3_src.pi and ../../acisf10320/products/spectra/fullrun_ccd3_acisf10320_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Fri Oct 28 01:32:44 2011] Not generating rmf since there are only 15 counts
[Fri Oct 28 01:32:46 2011] ../../acisf10320/products/lightcurves/fullrun_ccd3_acisf10320_pi14-548_pass1_cl_src3_src.lc and ../../acisf10320/products/lightcurves/fullrun_ccd3_acisf10320_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Fri Oct 28 01:32:54 2011] 160.775
[Fri Oct 28 01:34:41 2011] Updating aperture counts using extracted products
[Fri Oct 28 01:34:41 2011] Error reading totcts from fullrun_ccd3_acisf10320_pi14-548_pass1_cl_src3_src.pi.gz
[Fri Oct 28 01:34:41 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 28 01:34:41 2011] Using photon index=1.80, rate=0.000787, arf fullrun_ccd3_acisf10320_pi14-548_pass1_cl_src3.arf
[Fri Oct 28 01:34:41 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 28 01:34:41 2011] Updating source flux to 1.2e-14
[Fri Oct 28 01:34:46 2011] Source 3 has fewer than 100.000000 counts, skipping spectral fitting