[Tue Oct  4 09:59:52 2011] Detection parameters:
  Position = (205.8, 507.3) = 16 6 8.59 28 58 59.9
  Extent = 0.5" x 0.5", rotation angle = 81 degrees
  Source counts = 15.6 +/- 4.0
  Background counts = 0.4
  Rate = 0.001 +/- 0.0003

[Tue Oct  4 09:59:53 2011] Off-axis axis estimate = 2.32'
[Tue Oct  4 10:00:31 2011] Using EEF radius (= 0.47 ")to estimate initial spatial extent for simple fitting
[Tue Oct  4 10:00:31 2011] Initial guess for spatial extent in simple fitting = 0.47"
[Tue Oct  4 10:00:31 2011] source mask rpix=0.9, npix_max = 8, mask sum = 9, frac = 1.072
[Tue Oct  4 10:00:31 2011] Giving source the simple spatial ID 4 for pass 0, mean size = 0.47"
[Tue Oct  4 10:00:31 2011] fullrun_ccd7_acisf10318_pi14-548_cl_pass0_src4.ximg exists
[Tue Oct  4 10:00:31 2011] fullrun_ccd7_acisf10318_pi14-548_cl_pass0_src4_1.ximg exists
[Tue Oct  4 10:00:31 2011] Fit fullrun_ccd7_acisf10318_pi14-548_cl_pass0_src4 appears to have run properly
[Tue Oct  4 10:00:31 2011] fullrun_ccd7_acisf10318_pi14-548_cl_pass0_tfrozen_src4.ximg exists
[Tue Oct  4 10:00:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10318_pi14-548_cl_pass0_tfrozen_src4.csv
[Tue Oct  4 10:00:31 2011] fullrun_ccd7_acisf10318_pi14-548_cl_pass0_tfrozen_src4_1.ximg exists
[Tue Oct  4 10:00:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10318_pi14-548_cl_pass0_tfrozen_src4.csv
[Tue Oct  4 10:00:31 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10318_pi14-548_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10318_pi14-548_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct  4 10:00:36 2011] Spatial fit model total counts = 15.321300, observed total counts = 17.000000
[Tue Oct  4 10:00:36 2011] Offset between fit and detection position for source 6 = 0.913131 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.913131 pixels
  Position = (206.3, 508.1) = 16 6 8.59 28 59 0.1
  Extent = 0.4 (0.4-0.6)", rotation angle = 0
  Source counts = 14.9 +/- 3.9
  Background counts = 0.0
  Rate = 0.001 +/- 0.0003
[Tue Oct  4 10:00:36 2011] Vigneting correction estimate = 1.000000
[Tue Oct  4 10:00:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct  4 10:00:36 2011] Assessing source extent using major axis lower bound
[Tue Oct  4 10:00:36 2011] Source does appear to be extended
[Tue Oct  4 10:00:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct  4 10:00:53 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Oct  4 10:00:53 2011] Initial guess for spatial extent in simple fitting = 0.45"
[Tue Oct  4 10:00:53 2011] source mask rpix=0.9, npix_max = 7, mask sum = 6, frac = 0.753
[Tue Oct  4 10:00:53 2011] Giving source the simple spatial ID 4 for pass 1, mean size = 0.45"
[Tue Oct  4 10:00:53 2011] fullrun_ccd7_acisf10318_pi14-548_cl_pass1_src4.ximg exists
[Tue Oct  4 10:00:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10318_pi14-548_cl_pass1_src4.csv
[Tue Oct  4 10:00:53 2011] fullrun_ccd7_acisf10318_pi14-548_cl_pass1_src4_1.ximg exists
[Tue Oct  4 10:00:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10318_pi14-548_cl_pass1_src4.csv
[Tue Oct  4 10:00:53 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10318_pi14-548_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10318_pi14-548_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct  4 10:00:53 2011] fullrun_ccd7_acisf10318_pi14-548_cl_pass1_tfrozen_src4.ximg exists
[Tue Oct  4 10:00:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10318_pi14-548_cl_pass1_tfrozen_src4.csv
[Tue Oct  4 10:00:53 2011] fullrun_ccd7_acisf10318_pi14-548_cl_pass1_tfrozen_src4_1.ximg exists
[Tue Oct  4 10:00:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10318_pi14-548_cl_pass1_tfrozen_src4.csv
[Tue Oct  4 10:00:53 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10318_pi14-548_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10318_pi14-548_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct  4 10:00:59 2011] Spatial fit model total counts = 15.500600, observed total counts = 17.000000
[Tue Oct  4 10:00:59 2011] Offset between fit and detection position for source 6 = 0.012599 pixels
[Tue Oct  4 10:00:59 2011] 15.094183 total counts/ 0.000883 bgd. counts: snr = 507.824464
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.012599 pixels
  Position = (206.3, 508.1) = 16 6 8.59 28 59 0.1
  Extent = 0.4 (0.4-0.5)", rotation angle = 0
  Source counts = 15.1 +/- 3.9
  Background counts = 0.0
  Rate = 0.001 +/- 0.0003
[Tue Oct  4 10:00:59 2011] Vigneting correction estimate = 1.000000
[Tue Oct  4 10:00:59 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct  4 10:00:59 2011] Assessing source extent using major axis lower bound
[Tue Oct  4 10:00:59 2011] Source does appear to be extended
[Tue Oct  4 10:00:59 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct  4 10:02:31 2011] Not overwriting source region fullrun_ccd7_acisf10318_pi14-548_pass1_cl_src6_src.reg
[Tue Oct  4 10:02:31 2011] Extracting stamp from image fullrun_ccd7_acisf10318_pi14-548_cl_sm2.00.img.gz, (187, 489) - (226, 527)
[Tue Oct  4 10:02:31 2011] Writing fullrun_ccd7_acisf10318_pi14-548_pass1_cl_src6.gif
[Tue Oct  4 10:02:46 2011] ../../acisf10318/products/events/fullrun_ccd7_acisf10318_pi14-548_pass1_cl_src6_src.evt and ../../acisf10318/products/events/fullrun_ccd7_acisf10318_pi14-548_pass1_cl_src6_bgd.evt exist, delete to re-create
[Tue Oct  4 10:02:46 2011] Size of ../../acisf10318/products/events/fullrun_ccd7_acisf10318_pi14-548_pass1_cl_src6_src.evt.gz[events] = 15 counts
[Tue Oct  4 10:02:46 2011] Mean chipx,y = (143.47, 771.93)
[Tue Oct  4 10:02:46 2011] Mean tdetx,y = (4060.47, 2473.93)
[Tue Oct  4 10:02:46 2011] chipx,y range = (127.00-160.00, 759.00-791.00)
[Tue Oct  4 10:02:46 2011] Size of ../../acisf10318/products/events/fullrun_ccd7_acisf10318_pi14-548_pass1_cl_src6_bgd.evt.gz[events] = 5 counts
[Tue Oct  4 10:02:46 2011] ../../acisf10318/products/images/fullrun_ccd7_acisf10318_pi14-548_pass1_cl_src6_src.img and ../../acisf10318/products/images/fullrun_ccd7_acisf10318_pi14-548_pass1_cl_src6_bgd.img exist, delete to re-create
[Tue Oct  4 10:02:46 2011] ../../acisf10318/products/spectra/fullrun_ccd7_acisf10318_pi14-548_pass1_cl_src6_src.pi and ../../acisf10318/products/spectra/fullrun_ccd7_acisf10318_pi14-548_pass1_cl_src6_bgd.pi exist, delete to re-create
[Tue Oct  4 10:02:46 2011] Not generating rmf since there are only 15 counts
[Tue Oct  4 10:02:58 2011] ../../acisf10318/products/lightcurves/fullrun_ccd7_acisf10318_pi14-548_pass1_cl_src6_src.lc and ../../acisf10318/products/lightcurves/fullrun_ccd7_acisf10318_pi14-548_pass1_cl_src6_bgd.lc exist, delete to re-create
[Tue Oct  4 10:04:06 2011] 229.082
[Tue Oct  4 10:04:08 2011] Updating aperture counts using extracted products
[Tue Oct  4 10:04:08 2011] Error reading totcts from fullrun_ccd7_acisf10318_pi14-548_pass1_cl_src6_src.pi.gz
[Tue Oct  4 10:04:08 2011] Calculating source flux in energy range 0.30-8.00
[Tue Oct  4 10:04:08 2011] Using photon index=1.80, rate=0.00117, arf fullrun_ccd7_acisf10318_pi14-548_pass1_cl_src6.arf
[Tue Oct  4 10:04:08 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Oct  4 10:04:08 2011] Updating source flux to 8.9e-15
[Tue Oct  4 10:04:14 2011] Source 6 has fewer than 100.000000 counts, skipping spectral fitting