[Wed Oct 19 23:53:01 2011] Detection parameters:
  Position = (833.8, 951.6) = 14 18 55.54 24 41 4.7
  Extent = 0.5" x 0.5", rotation angle = 170 degrees
  Source counts = 32.8 +/- 5.9
  Background counts = 2.2
  Rate = 0.001 +/- 0.0002

[Wed Oct 19 23:53:01 2011] Off-axis axis estimate = 0.36'
[Wed Oct 19 23:53:47 2011] Using EEF radius (= 0.40 ")to estimate initial spatial extent for simple fitting
[Wed Oct 19 23:53:47 2011] Initial guess for spatial extent in simple fitting = 0.40"
[Wed Oct 19 23:53:47 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.869
[Wed Oct 19 23:53:47 2011] Giving source the simple spatial ID 8 for pass 0, mean size = 0.40"
[Wed Oct 19 23:53:47 2011] fullrun_ccd7_acisf10316_pi14-548_cl_pass0_src8.ximg exists
[Wed Oct 19 23:53:47 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd7_acisf10316_pi14-548_cl_pass0_src8.csv
[Wed Oct 19 23:53:47 2011] fullrun_ccd7_acisf10316_pi14-548_cl_pass0_src8_1.ximg exists
[Wed Oct 19 23:53:47 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd7_acisf10316_pi14-548_cl_pass0_src8.csv
[Wed Oct 19 23:53:47 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10316_pi14-548_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10316_pi14-548_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 19 23:53:48 2011] fullrun_ccd7_acisf10316_pi14-548_cl_pass0_tfrozen_src8.ximg exists
[Wed Oct 19 23:53:48 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd7_acisf10316_pi14-548_cl_pass0_tfrozen_src8.csv
[Wed Oct 19 23:53:48 2011] fullrun_ccd7_acisf10316_pi14-548_cl_pass0_tfrozen_src8_1.ximg exists
[Wed Oct 19 23:53:48 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd7_acisf10316_pi14-548_cl_pass0_tfrozen_src8.csv
[Wed Oct 19 23:53:48 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10316_pi14-548_cl_pass0_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10316_pi14-548_cl_pass0_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 19 23:53:55 2011] Spatial fit model total counts = -12.021500, observed total counts = 126.000000
[Wed Oct 19 23:53:55 2011] Poor agreement between spatial fit and data for source 9
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Oct 19 23:53:55 2011] Vigneting correction estimate = 1.000000
[Wed Oct 19 23:53:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 19 23:53:55 2011] Assessing source extent using major
[Wed Oct 19 23:53:55 2011] Source does appear to be extended
[Wed Oct 19 23:53:55 2011] Computing asymmetry using major and minor axis, asym = 1.01
[Wed Oct 19 23:54:14 2011] Using EEF radius (= 0.40 ")to estimate initial spatial extent for simple fitting
[Wed Oct 19 23:54:14 2011] Initial guess for spatial extent in simple fitting = 0.40"
[Wed Oct 19 23:54:14 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.869
[Wed Oct 19 23:54:14 2011] Giving source the simple spatial ID 8 for pass 1, mean size = 0.40"
[Wed Oct 19 23:54:14 2011] fullrun_ccd7_acisf10316_pi14-548_cl_pass1_src8.ximg exists
[Wed Oct 19 23:54:14 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd7_acisf10316_pi14-548_cl_pass1_src8.csv
[Wed Oct 19 23:54:14 2011] fullrun_ccd7_acisf10316_pi14-548_cl_pass1_src8_1.ximg exists
[Wed Oct 19 23:54:14 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd7_acisf10316_pi14-548_cl_pass1_src8.csv
[Wed Oct 19 23:54:14 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10316_pi14-548_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10316_pi14-548_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 19 23:54:15 2011] fullrun_ccd7_acisf10316_pi14-548_cl_pass1_tfrozen_src8.ximg exists
[Wed Oct 19 23:54:15 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd7_acisf10316_pi14-548_cl_pass1_tfrozen_src8.csv
[Wed Oct 19 23:54:15 2011] fullrun_ccd7_acisf10316_pi14-548_cl_pass1_tfrozen_src8_1.ximg exists
[Wed Oct 19 23:54:15 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd7_acisf10316_pi14-548_cl_pass1_tfrozen_src8.csv
[Wed Oct 19 23:54:15 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10316_pi14-548_cl_pass1_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10316_pi14-548_cl_pass1_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 19 23:54:21 2011] Spatial fit model total counts = -11.980200, observed total counts = 126.000000
[Wed Oct 19 23:54:21 2011] Poor agreement between spatial fit and data for source 9
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Oct 19 23:54:21 2011] Vigneting correction estimate = 1.000000
[Wed Oct 19 23:54:21 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 19 23:54:21 2011] Assessing source extent using major
[Wed Oct 19 23:54:21 2011] Source does appear to be extended
[Wed Oct 19 23:54:21 2011] Computing asymmetry using major and minor axis, asym = 1.01
[Wed Oct 19 23:55:36 2011] Not overwriting source region fullrun_ccd7_acisf10316_pi14-548_pass1_cl_src9_src.reg
[Wed Oct 19 23:55:36 2011] Extracting stamp from image fullrun_ccd7_acisf10316_pi14-548_cl_sm2.00.img.gz, (811, 929) - (856, 974)
[Wed Oct 19 23:55:36 2011] Writing fullrun_ccd7_acisf10316_pi14-548_pass1_cl_src9.gif
[Wed Oct 19 23:55:55 2011] ../../acisf10316/products/events/fullrun_ccd7_acisf10316_pi14-548_pass1_cl_src9_src.evt and ../../acisf10316/products/events/fullrun_ccd7_acisf10316_pi14-548_pass1_cl_src9_bgd.evt exist, delete to re-create
[Wed Oct 19 23:55:55 2011] Size of ../../acisf10316/products/events/fullrun_ccd7_acisf10316_pi14-548_pass1_cl_src9_src.evt.gz[events] = 34 counts
[Wed Oct 19 23:55:55 2011] Mean chipx,y = (225.18, 518.47)
[Wed Oct 19 23:55:55 2011] Mean tdetx,y = (4142.18, 2220.47)
[Wed Oct 19 23:55:55 2011] chipx,y range = (211.00-246.00, 502.00-535.00)
[Wed Oct 19 23:55:55 2011] Size of ../../acisf10316/products/events/fullrun_ccd7_acisf10316_pi14-548_pass1_cl_src9_bgd.evt.gz[events] = 29 counts
[Wed Oct 19 23:55:56 2011] ../../acisf10316/products/images/fullrun_ccd7_acisf10316_pi14-548_pass1_cl_src9_src.img and ../../acisf10316/products/images/fullrun_ccd7_acisf10316_pi14-548_pass1_cl_src9_bgd.img exist, delete to re-create
[Wed Oct 19 23:55:56 2011] ../../acisf10316/products/spectra/fullrun_ccd7_acisf10316_pi14-548_pass1_cl_src9_src.pi and ../../acisf10316/products/spectra/fullrun_ccd7_acisf10316_pi14-548_pass1_cl_src9_bgd.pi exist, delete to re-create
[Wed Oct 19 23:55:56 2011] Not generating rmf since there are only 32 counts
[Wed Oct 19 23:55:58 2011] ../../acisf10316/products/lightcurves/fullrun_ccd7_acisf10316_pi14-548_pass1_cl_src9_src.lc and ../../acisf10316/products/lightcurves/fullrun_ccd7_acisf10316_pi14-548_pass1_cl_src9_bgd.lc exist, delete to re-create
[Wed Oct 19 23:56:30 2011] 235.736
[Wed Oct 19 23:56:33 2011] Updating aperture counts using extracted products
[Wed Oct 19 23:56:33 2011] Error reading totcts from fullrun_ccd7_acisf10316_pi14-548_pass1_cl_src9_src.pi.gz
[Wed Oct 19 23:56:33 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 19 23:56:33 2011] Using photon index=1.80, rate=0.0011, arf fullrun_ccd7_acisf10316_pi14-548_pass1_cl_src9.arf
[Wed Oct 19 23:56:33 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 19 23:56:33 2011] Updating source flux to 8.2e-15
[Wed Oct 19 23:56:45 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting