[Wed Oct 19 23:52:59 2011] Detection parameters:
  Position = (731.9, 307.9) = 14 18 40.84 24 43 29.0
  Extent = 0.9" x 0.5", rotation angle = 73 degrees
  Source counts = 28.0 +/- 5.4
  Background counts = 1.0
  Rate = 0.0009 +/- 0.0002

[Wed Oct 19 23:53:00 2011] Off-axis axis estimate = 3.75'
[Wed Oct 19 23:53:46 2011] Using EEF radius (= 0.76 ")to estimate initial spatial extent for simple fitting
[Wed Oct 19 23:53:46 2011] Initial guess for spatial extent in simple fitting = 0.76"
[Wed Oct 19 23:53:46 2011] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.958
[Wed Oct 19 23:53:46 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 0.76"
[Wed Oct 19 23:53:47 2011] fullrun_ccd6_acisf10316_pi14-548_cl_pass0_src5.ximg exists
[Wed Oct 19 23:53:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10316_pi14-548_cl_pass0_src5.csv
[Wed Oct 19 23:53:47 2011] fullrun_ccd6_acisf10316_pi14-548_cl_pass0_src5_1.ximg exists
[Wed Oct 19 23:53:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10316_pi14-548_cl_pass0_src5.csv
[Wed Oct 19 23:53:47 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf10316_pi14-548_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf10316_pi14-548_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 19 23:53:47 2011] fullrun_ccd6_acisf10316_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Wed Oct 19 23:53:47 2011] fullrun_ccd6_acisf10316_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Wed Oct 19 23:53:47 2011] Fit fullrun_ccd6_acisf10316_pi14-548_cl_pass0_tfrozen_src5 appears to have run properly
[Wed Oct 19 23:53:53 2011] Spatial fit model total counts = 30.371600, observed total counts = 31.000000
[Wed Oct 19 23:53:53 2011] Offset between fit and detection position for source 4 = 0.930012 pixels
[Wed Oct 19 23:53:53 2011] 29.856030 total counts/ 2.928030 bgd. counts: snr = 15.736797
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.930012 pixels
  Position = (732.5, 308.6) = 14 18 40.84 24 43 29.1
  Extent = 0.9 (0.7-1.1)", rotation angle = 0
  Source counts = 26.9 +/- 5.5
  Background counts = 2.9
  Rate = 0.0009 +/- 0.0002
[Wed Oct 19 23:53:53 2011] Vigneting correction estimate = 1.000000
[Wed Oct 19 23:53:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 19 23:53:53 2011] Assessing source extent using major axis lower bound
[Wed Oct 19 23:53:53 2011] Source does appear to be extended
[Wed Oct 19 23:53:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 19 23:54:12 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct 19 23:54:12 2011] Initial guess for spatial extent in simple fitting = 0.86"
[Wed Oct 19 23:54:12 2011] source mask rpix=1.7, npix_max = 20, mask sum = 25, frac = 1.236
[Wed Oct 19 23:54:12 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 0.86"
[Wed Oct 19 23:54:13 2011] fullrun_ccd6_acisf10316_pi14-548_cl_pass1_src5.ximg exists
[Wed Oct 19 23:54:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10316_pi14-548_cl_pass1_src5.csv
[Wed Oct 19 23:54:13 2011] fullrun_ccd6_acisf10316_pi14-548_cl_pass1_src5_1.ximg exists
[Wed Oct 19 23:54:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10316_pi14-548_cl_pass1_src5.csv
[Wed Oct 19 23:54:13 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf10316_pi14-548_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf10316_pi14-548_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 19 23:54:14 2011] fullrun_ccd6_acisf10316_pi14-548_cl_pass1_tfrozen_src5.ximg exists
[Wed Oct 19 23:54:14 2011] fullrun_ccd6_acisf10316_pi14-548_cl_pass1_tfrozen_src5_1.ximg exists
[Wed Oct 19 23:54:14 2011] Fit fullrun_ccd6_acisf10316_pi14-548_cl_pass1_tfrozen_src5 appears to have run properly
[Wed Oct 19 23:54:19 2011] Spatial fit model total counts = 30.661500, observed total counts = 31.000000
[Wed Oct 19 23:54:19 2011] Offset between fit and detection position for source 4 = 0.015539 pixels
[Wed Oct 19 23:54:19 2011] 30.199960 total counts/ 2.838260 bgd. counts: snr = 16.241158
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.015539 pixels
  Position = (732.5, 308.7) = 14 18 40.84 24 43 29.1
  Extent = 0.9 (0.7-1.1)", rotation angle = 0
  Source counts = 27.4 +/- 5.5
  Background counts = 2.8
  Rate = 0.0009 +/- 0.0002
[Wed Oct 19 23:54:19 2011] Vigneting correction estimate = 1.000000
[Wed Oct 19 23:54:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 19 23:54:19 2011] Assessing source extent using major axis lower bound
[Wed Oct 19 23:54:19 2011] Source does appear to be extended
[Wed Oct 19 23:54:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 19 23:55:02 2011] Not overwriting source region fullrun_ccd6_acisf10316_pi14-548_pass1_cl_src4_src.reg
[Wed Oct 19 23:55:02 2011] Extracting stamp from image fullrun_ccd6_acisf10316_pi14-548_cl_sm2.00.img.gz, (693, 269) - (772, 348)
[Wed Oct 19 23:55:02 2011] Writing fullrun_ccd6_acisf10316_pi14-548_pass1_cl_src4.gif
[Wed Oct 19 23:55:14 2011] ../../acisf10316/products/events/fullrun_ccd6_acisf10316_pi14-548_pass1_cl_src4_src.evt and ../../acisf10316/products/events/fullrun_ccd6_acisf10316_pi14-548_pass1_cl_src4_bgd.evt exist, delete to re-create
[Wed Oct 19 23:55:14 2011] Size of ../../acisf10316/products/events/fullrun_ccd6_acisf10316_pi14-548_pass1_cl_src4_src.evt.gz[events] = 28 counts
[Wed Oct 19 23:55:14 2011] Mean chipx,y = (819.29, 300.11)
[Wed Oct 19 23:55:14 2011] Mean tdetx,y = (3694.29, 2002.11)
[Wed Oct 19 23:55:14 2011] chipx,y range = (802.00-839.00, 284.00-319.00)
[Wed Oct 19 23:55:14 2011] Size of ../../acisf10316/products/events/fullrun_ccd6_acisf10316_pi14-548_pass1_cl_src4_bgd.evt.gz[events] = 15 counts
[Wed Oct 19 23:55:14 2011] ../../acisf10316/products/images/fullrun_ccd6_acisf10316_pi14-548_pass1_cl_src4_src.img and ../../acisf10316/products/images/fullrun_ccd6_acisf10316_pi14-548_pass1_cl_src4_bgd.img exist, delete to re-create
[Wed Oct 19 23:55:14 2011] ../../acisf10316/products/spectra/fullrun_ccd6_acisf10316_pi14-548_pass1_cl_src4_src.pi and ../../acisf10316/products/spectra/fullrun_ccd6_acisf10316_pi14-548_pass1_cl_src4_bgd.pi exist, delete to re-create
[Wed Oct 19 23:55:14 2011] Not generating rmf since there are only 27 counts
[Wed Oct 19 23:55:17 2011] ../../acisf10316/products/lightcurves/fullrun_ccd6_acisf10316_pi14-548_pass1_cl_src4_src.lc and ../../acisf10316/products/lightcurves/fullrun_ccd6_acisf10316_pi14-548_pass1_cl_src4_bgd.lc exist, delete to re-create
[Wed Oct 19 23:55:35 2011] 199.955
[Wed Oct 19 23:56:32 2011] Updating aperture counts using extracted products
[Wed Oct 19 23:56:32 2011] Error reading totcts from fullrun_ccd6_acisf10316_pi14-548_pass1_cl_src4_src.pi.gz
[Wed Oct 19 23:56:33 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 19 23:56:33 2011] Using photon index=1.80, rate=0.000919, arf fullrun_ccd6_acisf10316_pi14-548_pass1_cl_src4.arf
[Wed Oct 19 23:56:33 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 19 23:56:33 2011] Updating source flux to 1e-14
[Wed Oct 19 23:56:41 2011] Source 4 has fewer than 100.000000 counts, skipping spectral fitting