[Fri Oct 28 08:32:52 2011] Detection parameters:
  Position = (153.7, 73.4) = 12 55 7.33 8 40 32.2
  Extent = 1.5" x 1.0", rotation angle = 114 degrees
  Source counts = 25.0 +/- 5.4
  Background counts = 4.0
  Rate = 0.002 +/- 0.0003

[Fri Oct 28 08:32:53 2011] Off-axis axis estimate = 7.34'
[Fri Oct 28 08:33:29 2011] Using EEF radius (= 2.39 ")to estimate initial spatial extent for simple fitting
[Fri Oct 28 08:33:29 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 28 08:33:29 2011] Initial guess for spatial extent in simple fitting = 2.39"
[Fri Oct 28 08:33:29 2011] source mask rpix=4.9, npix_max = 114, mask sum = 121, frac = 1.056
[Fri Oct 28 08:33:29 2011] Giving source the simple spatial ID 6 for pass 0, mean size = 2.39"
[Fri Oct 28 08:33:29 2011] fullrun_ccd7_acisf10315_pi14-548_cl_pass0_src6.ximg exists
[Fri Oct 28 08:33:29 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd7_acisf10315_pi14-548_cl_pass0_src6.csv
[Fri Oct 28 08:33:29 2011] fullrun_ccd7_acisf10315_pi14-548_cl_pass0_src6_1.ximg exists
[Fri Oct 28 08:33:29 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd7_acisf10315_pi14-548_cl_pass0_src6.csv
[Fri Oct 28 08:33:29 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10315_pi14-548_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10315_pi14-548_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 08:33:30 2011] fullrun_ccd7_acisf10315_pi14-548_cl_pass0_tfrozen_src6.ximg exists
[Fri Oct 28 08:33:30 2011] fullrun_ccd7_acisf10315_pi14-548_cl_pass0_tfrozen_src6_1.ximg exists
[Fri Oct 28 08:33:30 2011] Fit fullrun_ccd7_acisf10315_pi14-548_cl_pass0_tfrozen_src6 appears to have run properly
[Fri Oct 28 08:33:37 2011] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 27.671497 pixels away
[Fri Oct 28 08:33:37 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 08:33:37 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 08:33:37 2011] Assessing source extent using major
[Fri Oct 28 08:33:37 2011] Source does appear to be extended
[Fri Oct 28 08:33:37 2011] Computing asymmetry using major and minor axis, asym = 1.45
[Fri Oct 28 08:33:51 2011] Using EEF radius (= 2.39 ")to estimate initial spatial extent for simple fitting
[Fri Oct 28 08:33:51 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 28 08:33:51 2011] Initial guess for spatial extent in simple fitting = 2.39"
[Fri Oct 28 08:33:51 2011] source mask rpix=4.9, npix_max = 114, mask sum = 121, frac = 1.056
[Fri Oct 28 08:33:51 2011] Giving source the simple spatial ID 6 for pass 1, mean size = 2.39"
[Fri Oct 28 08:33:52 2011] fullrun_ccd7_acisf10315_pi14-548_cl_pass1_src6.ximg exists
[Fri Oct 28 08:33:52 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd7_acisf10315_pi14-548_cl_pass1_src6.csv
[Fri Oct 28 08:33:52 2011] fullrun_ccd7_acisf10315_pi14-548_cl_pass1_src6_1.ximg exists
[Fri Oct 28 08:33:52 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd7_acisf10315_pi14-548_cl_pass1_src6.csv
[Fri Oct 28 08:33:52 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10315_pi14-548_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10315_pi14-548_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 08:33:52 2011] fullrun_ccd7_acisf10315_pi14-548_cl_pass1_tfrozen_src6.ximg exists
[Fri Oct 28 08:33:52 2011] fullrun_ccd7_acisf10315_pi14-548_cl_pass1_tfrozen_src6_1.ximg exists
[Fri Oct 28 08:33:52 2011] Fit fullrun_ccd7_acisf10315_pi14-548_cl_pass1_tfrozen_src6 appears to have run properly
[Fri Oct 28 08:33:59 2011] Spatial fit model total counts = 42.846300, observed total counts = 43.000000
[Fri Oct 28 08:33:59 2011] Offset between fit and detection position for source 6 = 0.969571 pixels
[Fri Oct 28 08:33:59 2011] 42.574200 total counts/ 20.520500 bgd. counts: snr = 4.868414
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.969571 pixels
  Position = (154.7, 73.6) = 12 55 7.32 8 40 32.0
  Extent = 1.3 (0.7-2.1)", rotation angle = 0
  Source counts = 22.1 +/- 6.5
  Background counts = 20.5
  Rate = 0.001 +/- 0.0004
[Fri Oct 28 08:33:59 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 08:33:59 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 08:33:59 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 08:33:59 2011] Source does appear to be extended
[Fri Oct 28 08:33:59 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 08:35:01 2011] Not overwriting source region fullrun_ccd7_acisf10315_pi14-548_pass1_cl_src6_src.reg
[Fri Oct 28 08:35:01 2011] Extracting stamp from image fullrun_ccd7_acisf10315_pi14-548_cl_sm2.00.img.gz, (95, 14) - (214, 133)
[Fri Oct 28 08:35:01 2011] Writing fullrun_ccd7_acisf10315_pi14-548_pass1_cl_src6.gif
[Fri Oct 28 08:35:15 2011] ../../acisf10315/products/events/fullrun_ccd7_acisf10315_pi14-548_pass1_cl_src6_src.evt and ../../acisf10315/products/events/fullrun_ccd7_acisf10315_pi14-548_pass1_cl_src6_bgd.evt exist, delete to re-create
[Fri Oct 28 08:35:15 2011] Size of ../../acisf10315/products/events/fullrun_ccd7_acisf10315_pi14-548_pass1_cl_src6_src.evt.gz[events] = 32 counts
[Fri Oct 28 08:35:15 2011] Mean chipx,y = (960.75, 958.62)
[Fri Oct 28 08:35:15 2011] Mean tdetx,y = (4877.75, 2660.62)
[Fri Oct 28 08:35:15 2011] chipx,y range = (938.00-980.00, 936.00-983.00)
[Fri Oct 28 08:35:15 2011] Size of ../../acisf10315/products/events/fullrun_ccd7_acisf10315_pi14-548_pass1_cl_src6_bgd.evt.gz[events] = 74 counts
[Fri Oct 28 08:35:15 2011] ../../acisf10315/products/images/fullrun_ccd7_acisf10315_pi14-548_pass1_cl_src6_src.img and ../../acisf10315/products/images/fullrun_ccd7_acisf10315_pi14-548_pass1_cl_src6_bgd.img exist, delete to re-create
[Fri Oct 28 08:35:15 2011] ../../acisf10315/products/spectra/fullrun_ccd7_acisf10315_pi14-548_pass1_cl_src6_src.pi and ../../acisf10315/products/spectra/fullrun_ccd7_acisf10315_pi14-548_pass1_cl_src6_bgd.pi exist, delete to re-create
[Fri Oct 28 08:35:15 2011] Not generating rmf since there are only 22 counts
[Fri Oct 28 08:35:18 2011] ../../acisf10315/products/lightcurves/fullrun_ccd7_acisf10315_pi14-548_pass1_cl_src6_src.lc and ../../acisf10315/products/lightcurves/fullrun_ccd7_acisf10315_pi14-548_pass1_cl_src6_bgd.lc exist, delete to re-create
[Fri Oct 28 08:35:27 2011] 194.751
[Fri Oct 28 08:35:29 2011] Updating aperture counts using extracted products
[Fri Oct 28 08:35:29 2011] Error reading totcts from fullrun_ccd7_acisf10315_pi14-548_pass1_cl_src6_src.pi.gz
[Fri Oct 28 08:35:29 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 28 08:35:29 2011] Using photon index=1.80, rate=0.00138, arf fullrun_ccd7_acisf10315_pi14-548_pass1_cl_src6.arf
[Fri Oct 28 08:35:29 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 28 08:35:29 2011] Updating source flux to 1.3e-14
[Fri Oct 28 08:35:43 2011] Source 6 has fewer than 100.000000 counts, skipping spectral fitting