[Fri Oct 28 08:32:53 2011] Detection parameters:
  Position = (265.8, 616.3) = 12 55 3.61 8 44 59.3
  Extent = 0.8" x 0.5", rotation angle = 8 degrees
  Source counts = 10.2 +/- 3.3
  Background counts = 0.8
  Rate = 0.0006 +/- 0.0002

[Fri Oct 28 08:32:53 2011] Off-axis axis estimate = 3.14'
[Fri Oct 28 08:33:29 2011] Using EEF radius (= 0.61 ")to estimate initial spatial extent for simple fitting
[Fri Oct 28 08:33:29 2011] Initial guess for spatial extent in simple fitting = 0.61"
[Fri Oct 28 08:33:29 2011] source mask rpix=1.2, npix_max = 12, mask sum = 12, frac = 0.994
[Fri Oct 28 08:33:29 2011] Giving source the simple spatial ID 12 for pass 0, mean size = 0.61"
[Fri Oct 28 08:33:29 2011] fullrun_ccd7_acisf10315_pi14-548_cl_pass0_src12.ximg exists
[Fri Oct 28 08:33:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10315_pi14-548_cl_pass0_src12.csv
[Fri Oct 28 08:33:29 2011] fullrun_ccd7_acisf10315_pi14-548_cl_pass0_src12_1.ximg exists
[Fri Oct 28 08:33:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10315_pi14-548_cl_pass0_src12.csv
[Fri Oct 28 08:33:29 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10315_pi14-548_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10315_pi14-548_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 08:33:30 2011] fullrun_ccd7_acisf10315_pi14-548_cl_pass0_tfrozen_src12.ximg exists
[Fri Oct 28 08:33:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10315_pi14-548_cl_pass0_tfrozen_src12.csv
[Fri Oct 28 08:33:30 2011] fullrun_ccd7_acisf10315_pi14-548_cl_pass0_tfrozen_src12_1.ximg exists
[Fri Oct 28 08:33:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10315_pi14-548_cl_pass0_tfrozen_src12.csv
[Fri Oct 28 08:33:30 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10315_pi14-548_cl_pass0_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10315_pi14-548_cl_pass0_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 08:33:37 2011] Spatial fit model total counts = 11.349800, observed total counts = 15.000000
[Fri Oct 28 08:33:37 2011] Offset between fit and detection position for source 15 = 0.726955 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.726955 pixels
  Position = (266.3, 616.8) = 12 55 3.61 8 44 59.3
  Extent = 1.2 (0.8-1.5)" x 0.3 (0.2-0.5)", rotation angle = 353 (341-3) degrees
  Source counts = 10.8 +/- 3.3
  Background counts = 0.0
  Rate = 0.0007 +/- 0.0002
[Fri Oct 28 08:33:37 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 08:33:37 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 08:33:37 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 08:33:37 2011] Source does appear to be extended
[Fri Oct 28 08:33:37 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.49
[Fri Oct 28 08:33:37 2011] Deleting source due to low Poisson probability 0.9