[Fri Aug 31 00:14:30 2012] Detection parameters:
  Position = (329.8, 951.8) = 12 57 19.11 56 56 34.0
  Extent = 0.9" x 0.8", rotation angle = 165 degrees
  Source counts = 16.7 +/- 5.2
  Background counts = 10.3
  Rate = 0.0004 +/- 0.0001

[Fri Aug 31 00:14:30 2012] Off-axis axis estimate = 9.23'
[Fri Aug 31 00:15:21 2012] Using EEF radius (= 3.77 ")to estimate initial spatial extent for simple fitting
[Fri Aug 31 00:15:21 2012] Initial guess for spatial extent in simple fitting = 3.77"
[Fri Aug 31 00:15:21 2012] source mask rpix=7.7, npix_max = 266, mask sum = 252, frac = 0.945
[Fri Aug 31 00:15:21 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 3.77"
[Fri Aug 31 00:15:21 2012] fullrun_ccd6_acisf01031_pi14-548_cl_pass0_src10.ximg exists
[Fri Aug 31 00:15:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf01031_pi14-548_cl_pass0_src10.csv
[Fri Aug 31 00:15:21 2012] fullrun_ccd6_acisf01031_pi14-548_cl_pass0_src10_1.ximg exists
[Fri Aug 31 00:15:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf01031_pi14-548_cl_pass0_src10.csv
[Fri Aug 31 00:15:21 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf01031_pi14-548_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf01031_pi14-548_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 31 00:15:21 2012] fullrun_ccd6_acisf01031_pi14-548_cl_pass0_tfrozen_src10.ximg exists
[Fri Aug 31 00:15:21 2012] fullrun_ccd6_acisf01031_pi14-548_cl_pass0_tfrozen_src10_1.ximg exists
[Fri Aug 31 00:15:21 2012] Fit fullrun_ccd6_acisf01031_pi14-548_cl_pass0_tfrozen_src10 appears to have run properly
[Fri Aug 31 00:15:30 2012] Spatial fit model total counts = 58.185400, observed total counts = 58.000000
[Fri Aug 31 00:15:30 2012] Offset between fit and detection position for source 13 = 3.307765 pixels
[Fri Aug 31 00:15:30 2012] 57.867600 total counts/ 28.510000 bgd. counts: snr = 5.498218
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 3.307765 pixels
  Position = (328.0, 954.6) = 12 57 19.25 56 56 35.1
  Extent = 4.7 (1.0-7.5)", rotation angle = 0
  Source counts = 29.4 +/- 7.6
  Background counts = 28.5
  Rate = 0.0007 +/- 0.0002
[Fri Aug 31 00:15:30 2012] Vigneting correction estimate = 1.000000
[Fri Aug 31 00:15:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 31 00:15:30 2012] Assessing source extent using major axis lower bound
[Fri Aug 31 00:15:30 2012] Source does appear to be extended
[Fri Aug 31 00:15:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 31 00:15:51 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug 31 00:15:51 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Aug 31 00:15:51 2012] Initial guess for spatial extent in simple fitting = 4.70"
[Fri Aug 31 00:15:51 2012] source mask rpix=9.6, npix_max = 404, mask sum = 397, frac = 0.981
[Fri Aug 31 00:15:51 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 4.70"
[Fri Aug 31 00:15:52 2012] fullrun_ccd6_acisf01031_pi14-548_cl_pass1_src10.ximg exists
[Fri Aug 31 00:15:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf01031_pi14-548_cl_pass1_src10.csv
[Fri Aug 31 00:15:52 2012] fullrun_ccd6_acisf01031_pi14-548_cl_pass1_src10_1.ximg exists
[Fri Aug 31 00:15:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf01031_pi14-548_cl_pass1_src10.csv
[Fri Aug 31 00:15:52 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf01031_pi14-548_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf01031_pi14-548_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 31 00:15:52 2012] fullrun_ccd6_acisf01031_pi14-548_cl_pass1_tfrozen_src10.ximg exists
[Fri Aug 31 00:15:52 2012] fullrun_ccd6_acisf01031_pi14-548_cl_pass1_tfrozen_src10_1.ximg exists
[Fri Aug 31 00:15:52 2012] Fit fullrun_ccd6_acisf01031_pi14-548_cl_pass1_tfrozen_src10 appears to have run properly
[Fri Aug 31 00:16:00 2012] Warning, spatial fit 10 centroid is now closest to src. 3
[Fri Aug 31 00:16:00 2012] Vigneting correction estimate = 1.000000
[Fri Aug 31 00:16:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 31 00:16:00 2012] Assessing source extent using major axis lower bound
[Fri Aug 31 00:16:00 2012] Source does appear to be extended
[Fri Aug 31 00:16:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 31 00:17:20 2012] Not overwriting source region fullrun_ccd6_acisf01031_pi14-548_pass1_cl_src13_src.reg
[Fri Aug 31 00:17:20 2012] Extracting stamp from image fullrun_ccd6_acisf01031_pi14-548_cl_sm2.00.img.gz, (113, 740) - (543, 1170)
[Fri Aug 31 00:17:20 2012] Writing fullrun_ccd6_acisf01031_pi14-548_pass1_cl_src13.gif
[Fri Aug 31 00:17:46 2012] ../../acisf01031/products/events/fullrun_ccd6_acisf01031_pi14-548_pass1_cl_src13_src.evt and ../../acisf01031/products/events/fullrun_ccd6_acisf01031_pi14-548_pass1_cl_src13_bgd.evt exist, delete to re-create
[Fri Aug 31 00:17:46 2012] Size of ../../acisf01031/products/events/fullrun_ccd6_acisf01031_pi14-548_pass1_cl_src13_src.evt.gz[events] = 82 counts
[Fri Aug 31 00:17:46 2012] Mean chipx,y = (173.51, 213.96)
[Fri Aug 31 00:17:46 2012] Mean tdetx,y = (3048.51, 1915.96)
[Fri Aug 31 00:17:46 2012] chipx,y range = (130.00-214.00, 168.00-252.00)
[Fri Aug 31 00:17:46 2012] Size of ../../acisf01031/products/events/fullrun_ccd6_acisf01031_pi14-548_pass1_cl_src13_bgd.evt.gz[events] = 391 counts
[Fri Aug 31 00:17:46 2012] ../../acisf01031/products/images/fullrun_ccd6_acisf01031_pi14-548_pass1_cl_src13_src.img and ../../acisf01031/products/images/fullrun_ccd6_acisf01031_pi14-548_pass1_cl_src13_bgd.img exist, delete to re-create
[Fri Aug 31 00:17:46 2012] ../../acisf01031/products/spectra/fullrun_ccd6_acisf01031_pi14-548_pass1_cl_src13_src.pi and ../../acisf01031/products/spectra/fullrun_ccd6_acisf01031_pi14-548_pass1_cl_src13_bgd.pi exist, delete to re-create
[Fri Aug 31 00:17:46 2012] Not generating rmf since there are only 29 counts
[Fri Aug 31 00:17:49 2012] ../../acisf01031/products/lightcurves/fullrun_ccd6_acisf01031_pi14-548_pass1_cl_src13_src.lc and ../../acisf01031/products/lightcurves/fullrun_ccd6_acisf01031_pi14-548_pass1_cl_src13_bgd.lc exist, delete to re-create
[Fri Aug 31 00:18:15 2012] 171.235
[Fri Aug 31 00:19:40 2012] Updating aperture counts using extracted products
[Fri Aug 31 00:19:40 2012] Error reading totcts from fullrun_ccd6_acisf01031_pi14-548_pass1_cl_src13_src.pi.gz
[Fri Aug 31 00:19:40 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug 31 00:19:40 2012] Using photon index=1.80, rate=0.000748, arf fullrun_ccd6_acisf01031_pi14-548_pass1_cl_src13.arf
[Fri Aug 31 00:19:40 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Aug 31 00:19:40 2012] Updating source flux to 8.3e-15
[Fri Aug 31 00:19:51 2012] Source 13 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Aug 31 00:19:52 2012] acisf01031/analysis//spectral/fullrun_ccd6_acisf01031_pi14-548_pass1_cl_src13_pl.csv not found, spectral fit skipped or did not complete