[Sun Oct  2 17:43:12 2011] Detection parameters:
  Position = (298.3, 463.7) = 2 35 3.10 -18 4 22.9
  Extent = 0.6" x 0.5", rotation angle = 42 degrees
  Source counts = 66.3 +/- 8.2
  Background counts = 1.7
  Rate = 0.003 +/- 0.0004

[Sun Oct  2 17:43:12 2011] Off-axis axis estimate = 2.65'
[Sun Oct  2 17:43:54 2011] Using EEF radius (= 0.52 ")to estimate initial spatial extent for simple fitting
[Sun Oct  2 17:43:54 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Oct  2 17:43:54 2011] Initial guess for spatial extent in simple fitting = 0.52"
[Sun Oct  2 17:43:54 2011] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.937
[Sun Oct  2 17:43:54 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 0.52"
[Sun Oct  2 17:43:54 2011] fullrun_ccd7_acisf10306_pi14-548_cl_pass0_src3.ximg exists
[Sun Oct  2 17:43:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10306_pi14-548_cl_pass0_src3.csv
[Sun Oct  2 17:43:54 2011] fullrun_ccd7_acisf10306_pi14-548_cl_pass0_src3_1.ximg exists
[Sun Oct  2 17:43:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10306_pi14-548_cl_pass0_src3.csv
[Sun Oct  2 17:43:54 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10306_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10306_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct  2 17:43:55 2011] fullrun_ccd7_acisf10306_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Sun Oct  2 17:43:56 2011] fullrun_ccd7_acisf10306_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Sun Oct  2 17:43:56 2011] Fit fullrun_ccd7_acisf10306_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Sun Oct  2 17:44:07 2011] Spatial fit model total counts = 72.998500, observed total counts = 73.000000
[Sun Oct  2 17:44:07 2011] Offset between fit and detection position for source 4 = 0.723980 pixels
[Sun Oct  2 17:44:07 2011] 72.638110 total counts/ 7.792210 bgd. counts: snr = 23.230160
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.723980 pixels
  Position = (298.8, 464.3) = 2 35 3.10 -18 4 22.9
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 64.8 +/- 8.5
  Background counts = 7.8
  Rate = 0.003 +/- 0.0004
[Sun Oct  2 17:44:07 2011] Vigneting correction estimate = 1.000000
[Sun Oct  2 17:44:07 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct  2 17:44:07 2011] Assessing source extent using major axis lower bound
[Sun Oct  2 17:44:07 2011] Source does appear to be extended
[Sun Oct  2 17:44:07 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct  2 17:44:21 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct  2 17:44:21 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Oct  2 17:44:21 2011] Initial guess for spatial extent in simple fitting = 0.59"
[Sun Oct  2 17:44:21 2011] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.783
[Sun Oct  2 17:44:21 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 0.59"
[Sun Oct  2 17:44:23 2011] fullrun_ccd7_acisf10306_pi14-548_cl_pass1_src3.ximg exists
[Sun Oct  2 17:44:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10306_pi14-548_cl_pass1_src3.csv
[Sun Oct  2 17:44:23 2011] fullrun_ccd7_acisf10306_pi14-548_cl_pass1_src3_1.ximg exists
[Sun Oct  2 17:44:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10306_pi14-548_cl_pass1_src3.csv
[Sun Oct  2 17:44:23 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10306_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10306_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct  2 17:44:23 2011] fullrun_ccd7_acisf10306_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Sun Oct  2 17:44:23 2011] fullrun_ccd7_acisf10306_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Sun Oct  2 17:44:23 2011] Fit fullrun_ccd7_acisf10306_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Sun Oct  2 17:44:28 2011] Spatial fit model total counts = 73.885700, observed total counts = 74.000000
[Sun Oct  2 17:44:28 2011] Offset between fit and detection position for source 4 = 0.015729 pixels
[Sun Oct  2 17:44:28 2011] 73.233870 total counts/ 8.963470 bgd. counts: snr = 21.467077
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.015729 pixels
  Position = (298.8, 464.3) = 2 35 3.10 -18 4 22.9
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 64.3 +/- 8.6
  Background counts = 9.0
  Rate = 0.003 +/- 0.0004
[Sun Oct  2 17:44:28 2011] Vigneting correction estimate = 1.000000
[Sun Oct  2 17:44:28 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct  2 17:44:28 2011] Assessing source extent using major axis lower bound
[Sun Oct  2 17:44:28 2011] Source does appear to be extended
[Sun Oct  2 17:44:28 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct  2 17:45:11 2011] Not overwriting source region fullrun_ccd7_acisf10306_pi14-548_pass1_cl_src4_src.reg
[Sun Oct  2 17:45:11 2011] Extracting stamp from image fullrun_ccd7_acisf10306_pi14-548_cl_sm2.00.img.gz, (272, 437) - (326, 491)
[Sun Oct  2 17:45:11 2011] Writing fullrun_ccd7_acisf10306_pi14-548_pass1_cl_src4.gif
[Sun Oct  2 17:45:18 2011] ../../acisf10306/products/events/fullrun_ccd7_acisf10306_pi14-548_pass1_cl_src4_src.evt and ../../acisf10306/products/events/fullrun_ccd7_acisf10306_pi14-548_pass1_cl_src4_bgd.evt exist, delete to re-create
[Sun Oct  2 17:45:18 2011] Size of ../../acisf10306/products/events/fullrun_ccd7_acisf10306_pi14-548_pass1_cl_src4_src.evt.gz[events] = 68 counts
[Sun Oct  2 17:45:18 2011] Mean chipx,y = (428.07, 275.82)
[Sun Oct  2 17:45:18 2011] Mean tdetx,y = (4345.07, 1977.82)
[Sun Oct  2 17:45:18 2011] chipx,y range = (409.00-446.00, 260.00-295.00)
[Sun Oct  2 17:45:18 2011] Size of ../../acisf10306/products/events/fullrun_ccd7_acisf10306_pi14-548_pass1_cl_src4_bgd.evt.gz[events] = 22 counts
[Sun Oct  2 17:45:18 2011] ../../acisf10306/products/images/fullrun_ccd7_acisf10306_pi14-548_pass1_cl_src4_src.img and ../../acisf10306/products/images/fullrun_ccd7_acisf10306_pi14-548_pass1_cl_src4_bgd.img exist, delete to re-create
[Sun Oct  2 17:45:18 2011] ../../acisf10306/products/spectra/fullrun_ccd7_acisf10306_pi14-548_pass1_cl_src4_src.pi and ../../acisf10306/products/spectra/fullrun_ccd7_acisf10306_pi14-548_pass1_cl_src4_bgd.pi exist, delete to re-create
[Sun Oct  2 17:45:18 2011] Not generating rmf since there are only 64 counts
[Sun Oct  2 17:45:21 2011] ../../acisf10306/products/lightcurves/fullrun_ccd7_acisf10306_pi14-548_pass1_cl_src4_src.lc and ../../acisf10306/products/lightcurves/fullrun_ccd7_acisf10306_pi14-548_pass1_cl_src4_bgd.lc exist, delete to re-create
[Sun Oct  2 17:45:51 2011] 227.498
[Sun Oct  2 17:45:53 2011] Updating aperture counts using extracted products
[Sun Oct  2 17:45:53 2011] Error reading totcts from fullrun_ccd7_acisf10306_pi14-548_pass1_cl_src4_src.pi.gz
[Sun Oct  2 17:45:54 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct  2 17:45:54 2011] Using photon index=1.80, rate=0.00323, arf fullrun_ccd7_acisf10306_pi14-548_pass1_cl_src4.arf
[Sun Oct  2 17:45:54 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct  2 17:45:54 2011] Updating source flux to 2.5e-14
[Sun Oct  2 17:46:03 2011] Source 4 has fewer than 100.000000 counts, skipping spectral fitting