[Fri Oct 14 22:43:51 2011] Detection parameters:
  Position = (977.5, 734.3) = 22 19 16.46 -27 17 27.2
  Extent = 0.7" x 0.5", rotation angle = 153 degrees
  Source counts = 129.2 +/- 11.7
  Background counts = 6.8
  Rate = 0.003 +/- 0.0003

[Fri Oct 14 22:43:54 2011] Off-axis axis estimate = 4.75'
[Fri Oct 14 22:45:00 2011] Using EEF radius (= 1.08 ")to estimate initial spatial extent for simple fitting
[Fri Oct 14 22:45:00 2011] Initial guess for spatial extent in simple fitting = 1.08"
[Fri Oct 14 22:45:00 2011] source mask rpix=2.2, npix_max = 29, mask sum = 25, frac = 0.857
[Fri Oct 14 22:45:00 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 1.08"
[Fri Oct 14 22:45:01 2011] fullrun_ccd7_acisf10305_pi14-548_cl_pass0_src5.ximg exists
[Fri Oct 14 22:45:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10305_pi14-548_cl_pass0_src5.csv
[Fri Oct 14 22:45:01 2011] fullrun_ccd7_acisf10305_pi14-548_cl_pass0_src5_1.ximg exists
[Fri Oct 14 22:45:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10305_pi14-548_cl_pass0_src5.csv
[Fri Oct 14 22:45:01 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10305_pi14-548_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10305_pi14-548_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 14 22:45:01 2011] fullrun_ccd7_acisf10305_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Fri Oct 14 22:45:01 2011] fullrun_ccd7_acisf10305_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Fri Oct 14 22:45:01 2011] Fit fullrun_ccd7_acisf10305_pi14-548_cl_pass0_tfrozen_src5 appears to have run properly
[Fri Oct 14 22:45:13 2011] Spatial fit model total counts = 137.999000, observed total counts = 138.000000
[Fri Oct 14 22:45:13 2011] Offset between fit and detection position for source 9 = 0.544435 pixels
[Fri Oct 14 22:45:13 2011] 138.011600 total counts/ 24.428600 bgd. counts: snr = 22.980742
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.544435 pixels
  Position = (977.7, 734.8) = 22 19 16.47 -27 17 27.2
  Extent = 1.0 (0.8-1.1)", rotation angle = 0
  Source counts = 113.6 +/- 11.7
  Background counts = 24.4
  Rate = 0.003 +/- 0.0003
[Fri Oct 14 22:45:13 2011] Vigneting correction estimate = 1.000000
[Fri Oct 14 22:45:13 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 14 22:45:13 2011] Assessing source extent using major axis lower bound
[Fri Oct 14 22:45:13 2011] Source does appear to be extended
[Fri Oct 14 22:45:13 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 14 22:45:30 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 14 22:45:30 2011] Initial guess for spatial extent in simple fitting = 0.95"
[Fri Oct 14 22:45:30 2011] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.049
[Fri Oct 14 22:45:30 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 0.95"
[Fri Oct 14 22:45:31 2011] fullrun_ccd7_acisf10305_pi14-548_cl_pass1_src5.ximg exists
[Fri Oct 14 22:45:31 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd7_acisf10305_pi14-548_cl_pass1_src5.csv
[Fri Oct 14 22:45:31 2011] fullrun_ccd7_acisf10305_pi14-548_cl_pass1_src5_1.ximg exists
[Fri Oct 14 22:45:31 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd7_acisf10305_pi14-548_cl_pass1_src5.csv
[Fri Oct 14 22:45:31 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10305_pi14-548_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10305_pi14-548_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 14 22:45:31 2011] fullrun_ccd7_acisf10305_pi14-548_cl_pass1_tfrozen_src5.ximg exists
[Fri Oct 14 22:45:31 2011] fullrun_ccd7_acisf10305_pi14-548_cl_pass1_tfrozen_src5_1.ximg exists
[Fri Oct 14 22:45:31 2011] Fit fullrun_ccd7_acisf10305_pi14-548_cl_pass1_tfrozen_src5 appears to have run properly
[Fri Oct 14 22:45:39 2011] Spatial fit model total counts = 136.146000, observed total counts = 136.000000
[Fri Oct 14 22:45:39 2011] Offset between fit and detection position for source 9 = 0.009561 pixels
[Fri Oct 14 22:45:39 2011] 136.280300 total counts/ 22.947300 bgd. counts: snr = 23.658684
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.009561 pixels
  Position = (977.7, 734.8) = 22 19 16.47 -27 17 27.2
  Extent = 0.9 (0.8-1.1)", rotation angle = 0
  Source counts = 113.3 +/- 11.7
  Background counts = 22.9
  Rate = 0.003 +/- 0.0003
[Fri Oct 14 22:45:39 2011] Vigneting correction estimate = 1.000000
[Fri Oct 14 22:45:39 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 14 22:45:39 2011] Assessing source extent using major axis lower bound
[Fri Oct 14 22:45:39 2011] Source does appear to be extended
[Fri Oct 14 22:45:39 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 14 22:47:01 2011] Not overwriting source region fullrun_ccd7_acisf10305_pi14-548_pass1_cl_src9_src.reg
[Fri Oct 14 22:47:01 2011] Extracting stamp from image fullrun_ccd7_acisf10305_pi14-548_cl_sm2.00.img.gz, (935, 692) - (1021, 778)
[Fri Oct 14 22:47:01 2011] Writing fullrun_ccd7_acisf10305_pi14-548_pass1_cl_src9.gif
[Fri Oct 14 22:47:24 2011] ../../acisf10305/products/events/fullrun_ccd7_acisf10305_pi14-548_pass1_cl_src9_src.evt and ../../acisf10305/products/events/fullrun_ccd7_acisf10305_pi14-548_pass1_cl_src9_bgd.evt exist, delete to re-create
[Fri Oct 14 22:47:24 2011] Size of ../../acisf10305/products/events/fullrun_ccd7_acisf10305_pi14-548_pass1_cl_src9_src.evt.gz[events] = 133 counts
[Fri Oct 14 22:47:24 2011] Mean chipx,y = (750.11, 633.14)
[Fri Oct 14 22:47:24 2011] Mean tdetx,y = (4667.11, 2335.14)
[Fri Oct 14 22:47:24 2011] chipx,y range = (732.00-770.00, 614.00-655.00)
[Fri Oct 14 22:47:24 2011] Size of ../../acisf10305/products/events/fullrun_ccd7_acisf10305_pi14-548_pass1_cl_src9_bgd.evt.gz[events] = 62 counts
[Fri Oct 14 22:47:24 2011] ../../acisf10305/products/images/fullrun_ccd7_acisf10305_pi14-548_pass1_cl_src9_src.img and ../../acisf10305/products/images/fullrun_ccd7_acisf10305_pi14-548_pass1_cl_src9_bgd.img exist, delete to re-create
[Fri Oct 14 22:47:24 2011] ../../acisf10305/products/spectra/fullrun_ccd7_acisf10305_pi14-548_pass1_cl_src9_src.pi and ../../acisf10305/products/spectra/fullrun_ccd7_acisf10305_pi14-548_pass1_cl_src9_bgd.pi exist, delete to re-create
[Fri Oct 14 22:47:27 2011] ../../acisf10305/products/lightcurves/fullrun_ccd7_acisf10305_pi14-548_pass1_cl_src9_src.lc and ../../acisf10305/products/lightcurves/fullrun_ccd7_acisf10305_pi14-548_pass1_cl_src9_bgd.lc exist, delete to re-create
[Fri Oct 14 22:48:53 2011] Keeping rmf generated by specextract
[Fri Oct 14 22:48:54 2011] 215.324
[Fri Oct 14 22:49:04 2011] Updating aperture counts using extracted products
[Fri Oct 14 22:49:04 2011] Error reading totcts from fullrun_ccd7_acisf10305_pi14-548_pass1_cl_src9_src.pi.gz
[Fri Oct 14 22:49:04 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 14 22:49:04 2011] Using photon index=1.80, rate=0.00299, arf fullrun_ccd7_acisf10305_pi14-548_pass1_cl_src9.arf
[Fri Oct 14 22:49:04 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 14 22:49:04 2011] Updating source flux to 2.4e-14